Skip to the content
1223

LM2937IMP-3.3

Texas InstrumentsExtended

-40℃~+85℃@(Ta) 1 1.6V@(500mA) 26V 2mA 3.3V 400mA 75uVrms Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Over Voltage Protection、Short Circuit Protection SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM2937IMP-3.3
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223
Pins
4
In stock
1,406 at JLCPCB (C140265)
Used on
4 open-source boards

Overview

The LM2937IMP-3.3 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-223 package with 3 pins. -40℃~+85℃@(Ta) 1 1.6V@(500mA) 26V 2mA 3.3V 400mA 75uVrms Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Over Voltage Protection、Short Circuit Protection SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LM2937xMP, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-223-3_TabPin2, from KiCad's library), ready for a KiCad board. 1,406 are in stock at JLCPCB (part C140265). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1VI2GND3VO
Regulator_Linear:LM2937xMPFrom KiCad's library

Footprint

1223
Package_TO_SOT_SMD:SOT-223-3_TabPin2From KiCad's library

From the datasheet

6
Supply, most
26 V · INPUT, recommended operating max · p. 4
Supply, absolute maximum
26 V · INPUT, continuous absolute max · p. 4
Junction, hottest
150 °C · junction temperature absolute max · p. 4
Junction to air (DCY)
58.3 K/W · junction-to-ambient thermal resistance · p. 4
Junction to case (DCY)
39.2 K/W · junction-to-case top thermal resistance · p. 4
Junction to board (DCY)
1.6 K/W · junction-to-board characterization parameter ψJB · p. 4

Around it

2
cap 10 µF minimum
between OUTPUT and GND; Required for stability over the full expected operating temperature range; place as close as possible to the regulator. ESR must be 0.01 Ω to 3 Ω. · p. 13
cap 0.1 µF
between INPUT and GND; Design example input capacitor; required if the regulator is more than 3 inches from the power-supply-filter capacitors. · p. 13

Specifications

12
ParameterConditionsAs printedPage
Input voltage (VIN) VINContinuousmax 26 V4
Input voltage (VIN) VINTransient (t ≤ 100 ms)max 60 V4
Maximum junction temperaturemax 150 °C4
Storage temperature range Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin -2000 · max 2000 V4
Junction temperature (TJ) (2) TJLM2937IMP (DCY)min -40 · max 85 °C4
Input voltage (VIN) VINMinimum: VOUT + 1Vmax 26 V4
Junction-to-ambient thermal resistance RθJADCY, 4 PINStyp 58.3 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)DCY, 4 PINStyp 39.2 °C/W4
Junction-to-top characterization parameter ψJTDCY, 4 PINStyp 7 °C/W4
Junction-to-board characterization parameter ψJBDCY, 4 PINStyp 1.6 °C/W4
Junction-to-case (bottom) thermal resistance RθJC(bot)DCY, 4 PINStyp 22.5 °C/W4

Pins, by the datasheet

4
1 INPUT
Unregulated voltage input. · p. 3
2 GND
Ground. · p. 3
3 OUTPUT
Regulated voltage output; requires an output capacitor for stability. · p. 3
4 GND
Thermal tab, internally connected to pin 2; connect to a large copper area for heat removal and to GND, or leave floating. · p. 3

Open-source boards using it

4
  • 2 layers42.7 × 64 mmDisplayController, the printed circuit board in 3D

    DisplayController

    bwilkins/DisplayControllerPCB

    Controller for multiple 7-segment displays attached via shift registers

    32 parts
  • 2 layers57 × 43 mmRbcrash, the printed circuit board in 3D

    Rbcrash

    onitake/rbcrash

    Remote controlled high power RGB LED lamp

    42 parts
  • 6 layers150 × 150 mmShamiko, the printed circuit board in 3D

    Shamiko

    SHAMIKO-project/SHAMIKO-board

    SHAMIKO: an open-source side-channel analysis board with dual Xilinx Spartan-7 FPGAs

    524 partsMIT
  • 4 layers100 × 100 mmControl, the printed circuit board in 3D

    Control

    mamaheux/CNC

    149 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM2937IMP-3.3?

Yes. The symbol is Regulator_Linear:LM2937xMP and the footprint Package_TO_SOT_SMD:SOT-223-3_TabPin2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2937IMP-3.3?

SOT-223, with 3 pins. Its footprint is drawn on this page.

Where is the LM2937IMP-3.3 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM2937IMP-3.3?

JLCPCB lists it as part C140265, with 1,406 in stock; the sellers' links on this page open their listings.

What can replace the LM2937IMP-3.3?

Parts like it in the library: the AMS1117-3.3 by Advanced Monolithic Systems, the AMS1117-3.3 by UMW, the AMS1117-3.3V by MSKSEMI and the AMS1117-3.3V by JSMSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM2937IMP-3.3?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.