Skip to the content
1234

LM2936MP-5.0

Texas InstrumentsExtended

-40℃~+125℃@(Tj) -60dB@(120Hz) 1 200mV@(50mA) 40V 500uV 50mA 5V 9uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Input overvoltage protection、Reverse polarity voltage protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM2936MP-5.0
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223-3
Pins
4
In stock
140 at JLCPCB (C91309)
Used on
2 open-source boards

Overview

The LM2936MP-5.0 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-223-3 package with 4 pins. -40℃~+125℃@(Tj) -60dB@(120Hz) 1 200mV@(50mA) 40V 500uV 50mA 5V 9uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Input overvoltage protection、Reverse polarity voltage protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AZ2940S-5.0TRE1, from EasyEDA) and its footprint (EasyEDA_Cloud:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR, from EasyEDA), ready for a KiCad board. 140 are in stock at JLCPCB (part C91309). 2 open-source boards in 1 repository on GitHub use it.

Symbol

1IN2GND3OUT4TAB
EasyEDA_Cloud:AZ2940S-5.0TRE1From EasyEDA

Footprint

1234
EasyEDA_Cloud:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BRFrom EasyEDA

Pinout

4
The pins of the LM2936MP-5.0
PinNameType
1INUnspecified
2GNDUnspecified
3OUTUnspecified
4TABUnspecified

Open-source boards using it

2
  • 2 layers38.5 × 49 mmCCLOAD-01, the printed circuit board in 3D

    CCLOAD-01

    land-boards/lb-boards

    land-boards - Board Designs

    35 parts31
  • 2 layers38.5 × 49 mmCCLOAD-01, the printed circuit board in 3D

    CCLOAD-01

    land-boards/lb-boards

    land-boards - Board Designs

    34 parts31

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM2936MP-5.0?

Yes. The symbol is EasyEDA_Cloud:AZ2940S-5.0TRE1 and the footprint EasyEDA_Cloud:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2936MP-5.0?

SOT-223-3, with 4 pins. Its footprint is drawn on this page.

Where is the LM2936MP-5.0 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM2936MP-5.0?

JLCPCB lists it as part C91309, with 140 in stock; the sellers' links on this page open their listings.

What can replace the LM2936MP-5.0?

Parts like it in the library: the LD1117S50 by STMicroelectronics, the LM1117IMPX-5.0/NOPB by Texas Instruments, the BL1117-50CX by BL and the NCV4264-2CST50 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM2936MP-5.0?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.