Skip to the content
9

LM2775DSG

Texas InstrumentsExtended

-40℃~+85℃ 150uA 2.7V~5.5V 200mA 2MHz 3.5Ω 4.8V~5.2V Support boost converter WSON-8-EP(2x2) Charge Pumps ROHS

Part id
ti/LM2775DSG
Category
DC DC Converters
Package
WSON-8-EP(2x2)
Pins
9
In stock
4,116 at JLCPCB (C473361)
Used on
4 open-source boards

Overview

The LM2775DSG is a DC DC Converter made by Texas Instruments in a WSON-8-EP(2x2) package with 9 pins. -40℃~+85℃ 150uA 2.7V~5.5V 200mA 2MHz 3.5Ω 4.8V~5.2V Support boost converter WSON-8-EP(2x2) Charge Pumps ROHS.

PCBKit's library has its KiCad symbol (Regulator_SwitchedCapacitor:LM2775DSG, from KiCad's library) and its footprint (Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm, from KiCad's library), ready for a KiCad board. 4,116 are in stock at JLCPCB (part C473361). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1PFM2C1-3C1+4OUTDIS5EN6VOUT7VIN8GND
Regulator_SwitchedCapacitor:LM2775DSGFrom KiCad's library

Footprint

9
Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mmFrom KiCad's library

Pinout

9
The pins of the LM2775DSG
PinNameType
1PFMInput
2C1-Passive
3C1+Passive
4OUTDISInput
5ENInput
6VOUTPower out
7VINPower in
8GNDPower in
9GNDPassive

Open-source boards using it

4
  • 4 layers78 × 46.3 mmChrisPCB, the printed circuit board in 3D

    ChrisPCB

    TUDA-MUST/ChrisBox

    4 Channel Charge Amplifier PCB

    197 parts6
  • 4 layers40 × 20 mmHdmi pmod, the printed circuit board in 3D

    Hdmi pmod

    sparkengineering/hdmi-pmod

    HDMI type A receptacle to Digilent Pmod™ breakout board

    7 parts4CERN-OHL-P-2.0
  • 2 layers54 × 87 mmDalmierz, the printed circuit board in 3D

    Dalmierz

    SzymonGogulski/KICAD_SEE_ELECTRICAL_PROJECTS_PUEIE

    University projects related to PCB design and electrical diagram design. 7th semester - course "Design of Electrical and Electronic Systems".

    52 parts
  • 6 layers36.3 × 46 mmSulu ads1299, the printed circuit board in 3D

    Sulu ads1299

    PisterLab/scum-dev-board

    95 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM2775DSG?

Yes. The symbol is Regulator_SwitchedCapacitor:LM2775DSG and the footprint Package_SON:Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2775DSG?

WSON-8-EP(2x2), with 9 pins. Its footprint is drawn on this page.

Where is the LM2775DSG datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM2775DSG?

JLCPCB lists it as part C473361, with 4,116 in stock; the sellers' links on this page open their listings.

What can replace the LM2775DSG?

Parts like it in the library: the TPS62160DSG by Texas Instruments, the TLV62084DSG by Texas Instruments, the TPS62162DSGR by Texas Instruments and the TLV62084ADSG by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM2775DSG?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.