Skip to the content

LM2757TMX

Texas InstrumentsExtended

Charge pump / inverting topology switching、Low ripple / low noise architecture、Overcurrent Protection、Soft-start、Digital control、Load disconnect DSBGA-12(1.2x1.6) Charge Pumps ROHS

Part id
ti/LM2757TMX
Category
DC DC Converters
Package
DSBGA-12(1.2x1.6)
Pins
12
In stock
7 at JLCPCB (C2650338)

Overview

The LM2757TMX is a DC DC Converter made by Texas Instruments in a DSBGA-12(1.2x1.6) package with 12 pins. Charge pump / inverting topology switching、Low ripple / low noise architecture、Overcurrent Protection、Soft-start、Digital control、Load disconnect DSBGA-12(1.2x1.6) Charge Pumps ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LM2757TM_NOPB, from EasyEDA) and its footprint (EasyEDA_Cloud:DSBGA-12_L1.6-W1.2-R3-C4-P0.40-BL, from EasyEDA), ready for a KiCad board. 7 are in stock at JLCPCB (part C2650338).

Symbol

A1C2+A2OUTA3C1+B1C1-B2VINB3VINC1GNDC2GNDC3C2-D1NCD2M1D3M0
EasyEDA_Cloud:LM2757TM_NOPBFrom EasyEDA

Footprint

EasyEDA_Cloud:DSBGA-12_L1.6-W1.2-R3-C4-P0.40-BLFrom EasyEDA

Pinout

12
The pins of the LM2757TMX
PinNameType
A1C2+Unspecified
A2OUTUnspecified
A3C1+Unspecified
B1C1-Unspecified
B2VINUnspecified
B3VINUnspecified
C1GNDUnspecified
C2GNDUnspecified
C3C2-Unspecified
D1NCUnspecified
D2M1Unspecified
D3M0Unspecified

Questions

Is there a KiCad symbol and footprint for the LM2757TMX?

Yes. The symbol is EasyEDA_Cloud:LM2757TM_NOPB and the footprint EasyEDA_Cloud:DSBGA-12_L1.6-W1.2-R3-C4-P0.40-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2757TMX?

DSBGA-12(1.2x1.6), with 12 pins. Its footprint is drawn on this page.

Where is the LM2757TMX datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM2757TMX?

JLCPCB lists it as part C2650338, with 7 in stock; the sellers' links on this page open their listings.