LM27342QMY
Texas InstrumentsExtended
-40℃~+125℃@(TJ) 1 1V~18V 2A 2MHz 3V~20V Buck Buck Built-in No MSOP-10-EP DC-DC Converters ROHS
- Part id
- ti/LM27342QMY
- Category
- DC DC Converters
- Package
- MSOP-10-EP
- Pins
- 11
- In stock
- 10 at JLCPCB (C2071750)
Overview
The LM27342QMY is a DC DC Converter made by Texas Instruments in a MSOP-10-EP package with 11 pins. -40℃~+125℃@(TJ) 1 1V~18V 2A 2MHz 3V~20V Buck Buck Built-in No MSOP-10-EP DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (4ms-ic:LM27342, from 4ms) and its footprint (EasyEDA_Cloud:MSOP-10_L3.0-W3.0-P0.50-LS4.9-BL-EP, from EasyEDA), ready for a KiCad board. 10 are in stock at JLCPCB (part C2071750).
Symbol
Footprint
Pinout
11| Pin | Name | Type |
|---|---|---|
| 1 | SW | Passive |
| 2 | SW | Passive |
| 3 | BOOST | Passive |
| 4 | EN | Input |
| 5 | SYNC | Passive |
| 6 | FB | Passive |
| 7 | GND | Power in |
| 8 | AVIN | Input |
| 9 | PVIN | Power in |
| 10 | PVIN | Power in |
| 11 | PAD | Power in |
Parts like it
8
TPS54260QDGQRQ1
MSOP-10-EP-40℃~+125℃@(TA) 1 138uA 2.5A 2.5MHz 3.5V~60V 800mV~60V Adjustable Buck Built-in No Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Operating status indication、Frequency synchronization Step-down type MSOP-10-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLT8609IMSE#PBF
MSOP-10-EP-40℃~+125℃@(TJ) 1 2.2MHz 2.5uA 3A 3V~42V Adjustable Buck Buck Built-in Yes MSOP-10-EP DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersLT8609AIMSE#PBF
MSOP-10-EP-40℃~+125℃@(TJ) 1 1.7uA 2.2MHz 3A 3V~42V Adjustable Buck Buck Built-in Yes MSOP-10-EP DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersRT6362GFP
MSOP-10-40℃~+125℃@(TJ) 1 2.5A 2.5MHz 4V~60V 800mV~60V Adjustable Buck Buck Built-in No MSOP-10 DC-DC Converters ROHSRichtek TechDC-DC ConvertersLT3480HMSE#PBF
MSOP-10-EP-40℃~+150℃ 1 200kHz~2.4MHz 2A 3.6V~36V 70uA 790mV~20V Adjustable Buck Buck Built-in MSOP-10-EP DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersLT3480HMSE#TRPBF
MSOP-10-EP-40℃~+150℃@(TJ) 1 2.4MHz 2A 3.6V~36V 790mV~20V Adjustable Buck Buck Built-in No MSOP-10-EP DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersLT3480MPMSE#TRPBF
MSOP-10-EP-55℃~+150℃@(TJ) 1 2.4MHz 2A 3.6V~36V 790mV~20V Adjustable Buck Buck Built-in MSOP-10-EP DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersLT3684IMSE#PBF
MSOP-10-EP-40℃~+125℃@(TJ) 1 1.265V~20V 2A 3.6V~34V 300kHz~2.8MHz Adjustable Buck Buck Built-in MSOP-10-EP DC-DC Converters ROHSAnalog DevicesDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the LM27342QMY?
Yes. The symbol is 4ms-ic:LM27342 and the footprint EasyEDA_Cloud:MSOP-10_L3.0-W3.0-P0.50-LS4.9-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM27342QMY?
MSOP-10-EP, with 11 pins. Its footprint is drawn on this page.
Where is the LM27342QMY datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM27342QMY?
JLCPCB lists it as part C2071750, with 10 in stock; the sellers' links on this page open their listings.
What can replace the LM27342QMY?
Parts like it in the library: the TPS54260QDGQRQ1 by Texas Instruments, the LT8609IMSE#PBF by Analog Devices, the LT8609AIMSE#PBF by Analog Devices and the RT6362GFP by Richtek Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.