LM13700MX

Q: Is there a KiCad symbol and footprint for the LM13700MX?

Yes. The symbol is Amplifier_Operational:LM13700 and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

Q: What package is the LM13700MX?

SOIC-16, with 16 pins. Its footprint is drawn on this page.

Q: Where is the LM13700MX datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Q: Where can I order the LM13700MX?

JLCPCB lists it as part C174050, with 1,745 in stock; the sellers' links on this page open their listings.

Texas Instruments

-16V~-4.75V、4.75V~16V 0℃~+70℃ 100nA 110dB 2 20mA 300uA 400nA 400uV 50V/us 9.5V~32V SOIC-16 Operational Amplifier ROHS

Extended

Datasheetti/LM13700MX

Category: Operational Amplifier
Package: SOIC-16
Pins: 16

Overview

The LM13700MX is an operational Amplifier made by Texas Instruments in a SOIC-16 package with 16 pins. -16V~-4.75V、4.75V~16V 0℃~+70℃ 100nA 110dB 2 20mA 300uA 400nA 400uV 50V/us 9.5V~32V SOIC-16 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:LM13700, from KiCad's library) and its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,745 are in stock at JLCPCB (part C174050).

Symbol

Amplifier_Operational:LM13700From KiCad's library

Footprint

Package_SO:SOIC-16_3.9x9.9mm_P1.27mmFrom KiCad's library

From the datasheet

Supply, least: 9.5 V · V+, single-supply configuration, recommended min · p. 4
Supply, most: 32 V · V+, single-supply configuration, recommended max · p. 4
Supply, least: 4.75 V · V+, dual-supply configuration, recommended min · p. 4
Supply, most: 16 V · V+, dual-supply configuration, recommended max · p. 4
Supply, least: 16 V · V–, dual-supply configuration, recommended min · p. 4
Supply, most: 4.75 V · V–, dual-supply configuration, recommended max · p. 4
Supply, absolute maximum: 36 V · V+ to V–, absolute max supply voltage · p. 4
Works from: 0 °C · Operating temperature, LM13700MX/NOPB, min · p. 31
Works up to: 70 °C · Operating temperature, LM13700MX/NOPB, max · p. 31
Junction, hottest: 150 °C · Junction temperature, max for derating · p. 4
Takes working: 2.6 mA · Supply current, both channels, IABC = 500 uA, typical · p. 5
A pin gives at most: 20 mA · Buffer output current, absolute max; limited by package dissipation · p. 4
Junction to air (D (SOIC)): 83 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (D (SOIC)): 44 K/W · Junction-to-case (top) thermal resistance · p. 4
Junction to board (D (SOIC)): 40.5 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

Transconductance adjustment: Over 6 decades · p. 1
Linearizing diodes: Reduced output distortion · p. 1
Buffers: High impedance · p. 1

Around it

res 13-kΩ: between V+ and Diode bias; Example diode bias resistor for VS = +15 V and approximately 1 mA diode bias current. · p. 11
res 30-kΩ: between VC and Amp bias input; Example gain-control bias resistor; selected for approximately 1 mA at VC = 15 V. · p. 11

Specifications

Parameter	Conditions	As printed	Page
Supply voltage	36 VDC or ±18 V	max 36 V	4
Differential input voltage	±5 V	max 5 V	4
Diode bias current (ID) ID		max 2 mA	4
Amplifier bias current (IABC) IABC		max 2 mA	4
Buffer output current (2)	Should be limited so as to not exceed package dissipation	max 20 mA	4
Storage temperature, Tstg Tstg		min -65 · max 150 °C	4
V+ (single-supply configuration) V+	single-supply configuration	min 9.5 · max 32 V	4
V+ (dual-supply configuration) V+	dual-supply configuration	min 4.75 · max 16 V	4
V– (dual-supply configuration) V–	dual-supply configuration	min -16 · max -4.75 V	4
Junction-to-ambient thermal resistance RθJA	D (SOIC), 16 PINS	typ 83 °C/W	4
Junction-to-case (top) thermal resistance RθJC(top)	D (SOIC), 16 PINS	typ 44 °C/W	4
Junction-to-board thermal resistance RθJB	D (SOIC), 16 PINS	typ 40.5 °C/W	4
Junction-to-top characterization parameter ψJT	D (SOIC), 16 PINS	typ 11.5 °C/W	4
Junction-to-board characterization parameter ψJB	D (SOIC), 16 PINS	typ 40.2 °C/W	4
Input offset voltage (VOS) VOS	Over specified temperature range	typ 0.4 · max 4 mV	5
Input offset voltage (VOS) VOS	IABC = 5 uA	typ 0.3 · max 4 mV	5
VOS including diodes VOS	Diode bias current (ID) = 500 uA	typ 0.5 · max 5 mV	5
Input offset change	5 uA ≤ IABC ≤ 500 uA	typ 0.1 · max 3 mV	5
Input offset current		typ 0.1 · max 0.6 uA	5
Input bias current		typ 0.4 · max 5 uA	5
Input bias current	Over specified temperature range	typ 1 · max 8 uA	5
Forward transconductance (gm) gm		min 6700 · typ 9600 · max 13000 uS	5
Forward transconductance (gm) gm	Over specified temperature range	min 5400 uS	5
gm tracking		typ 0.3 dB	5
Peak output current	RL = 0, IABC = 5 uA	typ 5 uA	5
Peak output current	RL = 0, IABC = 500 uA	min 350 · typ 500 · max 650 uA	5
Peak output current	RL = 0, Over Specified Temp Range	min 300 uA	5
Supply current	IABC = 500 uA, both channels	typ 2.6 mA	5
CMRR CMRR		min 80 · typ 110 dB	5
Common-mode range	Symmetric range: minimum ±12 V, typical ±13.5 V	min 12 · typ 13.5 V	5
Crosstalk	Referred to input; 20 Hz < f < 20 kHz; VS = ±15 V, IABC = 500 uA, ROUT = 5-kΩ from buffer output to −VS, buffer input connected to transconductance amplifier output	typ 100 dB	5
Differential input current	IABC = 0, input = ±4 V	typ 0.02 · max 100 nA	5
Leakage current	IABC = 0 (refer to test circuit)	typ 0.2 · max 100 nA	5
Input resistance		min 10 · typ 26 kΩ	5
Open-loop bandwidth		typ 2 MHz	5
Slew rate	Unity gain compensated	typ 50 V/us	5
Buffer input current	VS = ±15 V, IABC = 500 uA, ROUT = 5-kΩ from buffer output to −VS, buffer input connected to transconductance amplifier output	typ 0.5 · max 2 uA	5
Peak buffer output voltage	VS = ±15 V, IABC = 500 uA, ROUT = 5-kΩ from buffer output to −VS, buffer input connected to transconductance amplifier output	min 10 V	5
PEAK OUTPUT VOLTAGE Positive	RL = ∞, 5 uA ≤ IABC ≤ 500 uA	min 12 · typ 14.2 V	5
PEAK OUTPUT VOLTAGE Negative	RL = ∞, 5 uA ≤ IABC ≤ 500 uA	min -12 · typ -14.4 V	5
VOS SENSITIVITY Positive	ΔVOS/ΔV+	typ 20 · max 150 uV/V	5
VOS SENSITIVITY Negative	ΔVOS/ΔV−	typ 20 · max 150 uV/V	5

Pins, by the datasheet

1 Amp bias input: Current bias input. · p. 3
2 Diode bias: Linearizing diode bias input. · p. 3
3 Input+: Positive input. · p. 3
4 Input–: Negative input. · p. 3
5 Output: Unbuffered output. · p. 3
6 V–: Negative power supply. · p. 3
7 Buffer input: Buffer amplifier input. · p. 3
8 Buffer output: Buffer amplifier output. · p. 3
9 Buffer output: Buffer amplifier output. · p. 3
10 Buffer input: Buffer amplifier input. · p. 3
11 V+: Positive power supply. · p. 3
12 Output: Unbuffered output. · p. 3
13 Input–: Negative input. · p. 3
14 Input+: Positive input. · p. 3
15 Diode bias: Linearizing diode bias input. · p. 3
16 Amp bias input: Current bias input. · p. 3

Ordering codes, by the datasheet

LM13700M/NOPB: SOIC (D), 16 pins · 48 per tube; operating temperature 0 to 70 °C · p. 31
LM13700M/NOPB.B: SOIC (D), 16 pins · 48 per tube; operating temperature 0 to 70 °C · p. 31
LM13700MX/NOPB: SOIC (D), 16 pins · 2500 per large tape and reel; operating temperature 0 to 70 °C · p. 31
LM13700MX/NOPB.B: SOIC (D), 16 pins · 2500 per large tape and reel; operating temperature 0 to 70 °C · p. 31

Parameters

Common Mode Rejection Ratio(CMRR): 110dB
Current - Supply: 2.6mA
Dual Supply: -16V~-4.75V
Ib - Input Bias Current: 400nA
Input Offset Current(Ios): 100nA
Junction Temperature(Max): 150℃
Number of Channels: 2
Operating Temperature: 0℃~+70℃
Output Current: 20mA
Output Current per Pin(Max): 20mA
Quiescent Current: 300uA
Single supply: 9.5V~32V
Slew Rate: 50V/us
Thermal Resistance(Junction to Ambient): 83℃/W
Thermal Resistance(Junction to Board): 40.5℃/W
Thermal Resistance(Junction to Case): 44℃/W
Voltage - Supply: 4.75V~32V
Voltage - Supply(Absolute Max): 36V
Vos - Input Offset Voltage: 400uV

Order codes

LM13700MX/NOPBLCSC C174050
LM13700MXLCSC C4370937

Pinout

The pins of the LM13700MX
Pin	Name	Type
1	—	Input
2	DIODE_BIAS	Input
3	+	Input
4	-	Input
5	—	Output
6	V-	Power in
7	—	Input
8	—	Output
9	—	Output
10	—	Input
11	V+	Power in
12	—	Output
13	-	Input
14	+	Input
15	DIODE_BIAS	Input
16	—	Input

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/ti/LM13700MX" title="LM13700MX in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/ti/LM13700MX.jpg" alt="LM13700MX" width="1200" height="900">

A picture that opens the part, for a README

[![LM13700MX](https://pcbkit.io/embed/parts/ti/LM13700MX.jpg?size=s)](https://pcbkit.io/parts/ti/LM13700MX)

Questions

Is there a KiCad symbol and footprint for the LM13700MX?

Yes. The symbol is Amplifier_Operational:LM13700 and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM13700MX?

SOIC-16, with 16 pins. Its footprint is drawn on this page.

Where is the LM13700MX datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM13700MX?

JLCPCB lists it as part C174050, with 1,745 in stock; the sellers' links on this page open their listings.