L293NEG4
Texas InstrumentsExtended
0℃~+70℃ 1A 2 4.5V~36V Bipolar Driver Built-in charge pump Yes PDIP-16 Stepper Motor Driver ROHS
- Part id
- ti/L293NEG4
- Category
- Stepper Motor Driver
- Package
- PDIP-16
- Pins
- 16
- In stock
- 0 at JLCPCB (C1556982)
Overview
The L293NEG4 is a stepper Motor Driver made by Texas Instruments in a PDIP-16 package with 16 pins. 0℃~+70℃ 1A 2 4.5V~36V Bipolar Driver Built-in charge pump Yes PDIP-16 Stepper Motor Driver ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:L293NEG4, from EasyEDA) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1556982).
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | 12EN | Unspecified |
| 2 | 1A | Unspecified |
| 3 | 1y | Unspecified |
| 4 | GND | Unspecified |
| 5 | GND | Unspecified |
| 6 | 2Y | Unspecified |
| 7 | 2A | Unspecified |
| 8 | VCC2 | Unspecified |
| 9 | 34EN | Unspecified |
| 10 | 3A | Unspecified |
| 11 | 3Y | Unspecified |
| 12 | GND | Unspecified |
| 13 | GND | Unspecified |
| 14 | 4Y | Unspecified |
| 15 | 4A | Unspecified |
| 16 | VCC1 | Unspecified |
Parts like it
6XD754410
DIP-16-40℃~+85℃ 1A 2 4.5V~36V 4.5V~5.5V Bipolar Driver DIP-16 Stepper Motor Driver ROHSXINLUDAStepper Motor DriverNJM37717D2
DIP-161A 2 4.75V~5.25V Bipolar Driver DIP-16 Stepper Motor Driver ROHSNisshinbo Micro Devices Inc.Stepper Motor DriverL293NE
PDIP-160℃~+70℃ 1A 2 4.5V~7V Bipolar Driver Built-in charge pump PDIP-16 Stepper Motor Driver ROHSTexas InstrumentsStepper Motor DriverTB67S111PG,HJ
DIP-16-20℃~+85℃ 1.5A 250mΩ 4.75V~5.25V Unipolar Drive Yes DIP-16 Stepper Motor Driver ROHSToshibaStepper Motor DriverTB67S112PG,HJ
DIP-16-40℃~+85℃ 1.5A 300mΩ 4.5V~47V Unipolar Drive Yes DIP-16 Stepper Motor Driver ROHSToshibaStepper Motor DriverL293NEE4
PDIP-16Stepper Motor DriverTexas Instruments
Questions
Is there a KiCad symbol and footprint for the L293NEG4?
Yes. The symbol is EasyEDA_Cloud:L293NEG4 and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the L293NEG4?
PDIP-16, with 16 pins. Its footprint is drawn on this page.
Where is the L293NEG4 datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the L293NEG4?
JLCPCB lists it as part C1556982, with 0 in stock; the sellers' links on this page open their listings.
What can replace the L293NEG4?
Parts like it in the library: the XD754410 by XINLUDA, the NJM37717D2 by Nisshinbo Micro Devices Inc., the L293NE by Texas Instruments and the TB67S111PG,HJ by Toshiba. Check their datasheets: a part that fits the footprint may still differ in its ratings.