Texas InstrumentsExtended
0℃~+70℃ 4.5V~36V DIP-16 Gate Drivers ROHS
The L293DNE is a gate Driver made by Texas Instruments in a DIP-16 package with 16 pins. 0℃~+70℃ 4.5V~36V DIP-16 Gate Drivers ROHS.
PCBKit's library has its KiCad symbol (Driver_Motor:L293D, from KiCad's library) and its footprint (Package_DIP:DIP-16_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C701118). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | EN1,2 | Input |
| 2 | 1A | Input |
| 3 | 1Y | Output |
| 4 | GND | Power in |
| 5 | GND | Power in |
| 6 | 2Y | Output |
| 7 | 2A | Input |
| 8 | VCC2 | Power in |
| 9 | EN3,4 | Input |
| 10 | 3A | Input |
| 11 | 3Y | Output |
| 12 | GND | Power in |
| 13 | GND | Power in |
| 14 | 4Y | Output |
| 15 | 4A | Input |
| 16 | VCC1 | Power in |
djbristow/RAILS
RAILS is a software model and implementation of an automated system to assist the model railroader achieve realism in the operation of a model railroad. The model then drives the development of software.
Yes. The symbol is Driver_Motor:L293D and the footprint Package_DIP:DIP-16_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
DIP-16, with 16 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C701118, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the HIP4082IPZ by Renesas Electronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.
