Skip to the content
PCBKitNew board
12345678910111213141516

ISO3082DWR

Texas Instruments

-40℃~+85℃ 200Kbps Failure protection circuit SOIC-16-300mil Isolated RS-485/422 Transceivers ROHS

Extended
DatasheetJLCPCBLCSCti/ISO3082DWR
Category
Isolated RS 485, 422 Transceivers
Package
SOIC-16-300mil
Pins
16

Overview

The ISO3082DWR is an isolated RS 485, 422 Transceiver made by Texas Instruments in a SOIC-16-300mil package with 16 pins. -40℃~+85℃ 200Kbps Failure protection circuit SOIC-16-300mil Isolated RS-485/422 Transceivers ROHS.

PCBKit's library has its KiCad symbol (Interface_UART:ISO3082DW, from KiCad's library) and its footprint (Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm, from KiCad's library), ready for a KiCad board. 51,277 are in stock at JLCPCB (part C21710). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

GALVANIC ISOLATIONVcc11GND12R3RE4DE5D6GND17GND18GND29GND210A12B13GND215Vcc216
Interface_UART:ISO3082DWFrom KiCad's library

Footprint

12345678910111213141516
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mmFrom KiCad's library

Parameters

11
CMTI(kV/us)
25kV/us
Communication Mode
Half-Duplex
Data Rate(Max)
200Kbps
Features
Fail-safe circuit
Isolation Voltage(Vrms)
2500
Number of Drivers
1
Number of Nodes
256
Number of Receivers
1
Operating Temperature
-40℃~+85℃
Voltage - Supply (Bus)
4.5V~5.5V
Voltage - Supply (Logic)
3.15V~5.5V

Order codes

1

Pinout

16
The pins of the ISO3082DWR
PinNameType
1Vcc1Power in
2GND1Power in
3ROutput
4REInput
5DEInput
6DInput
7GND1Power in
8GND1Power in
9GND2Power in
10GND2Power in
11NCNot connected
12AInput/output
13BInput/output
14NCNot connected
15GND2Power in
16Vcc2Power in

Open-source boards using it

All 3
  • 2 layers158 × 85 mmPiPLC Mainboard, the printed circuit board in 3D

    PiPLC Mainboard

    Chrismettal/PiPLC

    Glorified breakout board + DIN rail case for Pis

    154 parts19
  • 4 layers130 × 85 mmRapid Core RCP, the printed circuit board in 3D

    Rapid Core RCP

    Arockiyalipson/Rapid-CoreX

    A PCB Board with Various Communication protocols

    170 partsMIT
  • 2 layers55 × 100 mmModbusRelayV2p1, the printed circuit board in 3D

    ModbusRelayV2p1

    czalinski/ThlHwTestDevices

    KiCad designs, firmware and documentation for circuits that support testing of electrical hardware, such as HASS and HALT testing.

    46 partsMIT

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/ISO3082DWR" title="ISO3082DWR in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/ISO3082DWR.jpg" alt="ISO3082DWR" width="1200" height="900">
A picture that opens the part, for a README
[![ISO3082DWR](https://pcbkit.io/embed/parts/ti/ISO3082DWR.jpg?size=s)](https://pcbkit.io/parts/ti/ISO3082DWR)

Questions

Is there a KiCad symbol and footprint for the ISO3082DWR?

Yes. The symbol is Interface_UART:ISO3082DW and the footprint Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ISO3082DWR?

SOIC-16-300mil, with 16 pins. Its footprint is drawn on this page.

Where is the ISO3082DWR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ISO3082DWR?

JLCPCB lists it as part C21710, with 51,277 in stock; the sellers' links on this page open their listings.

What can replace the ISO3082DWR?

Parts like it in the library: the ISO1410DW by Texas Instruments, the ISO1432BDW by Texas Instruments, the ISO3086DW by Texas Instruments and the CMT83085 by HopeRF Micro-electronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ISO3082DWR?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8