Texas InstrumentsExtended
-40℃~+125℃ 1Mbps Failure protection circuit、Bus fault detection SSOP-16-150mil Isolated RS-485/422 Transceivers ROHS
The ISO1500DBQ is an isolated RS 485, 422 Transceiver made by Texas Instruments in a SSOP-16-150mil package with 16 pins. -40℃~+125℃ 1Mbps Failure protection circuit、Bus fault detection SSOP-16-150mil Isolated RS-485/422 Transceivers ROHS.
PCBKit's library has its KiCad symbol (Interface_UART:ISO1500, from KiCad's library) and its footprint (Package_SO:SSOP-16_3.9x4.9mm_P0.635mm, from KiCad's library), ready for a KiCad board. 8,949 are in stock at JLCPCB (part C2671333). 2 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VCC1 | Power in |
| 2 | GND1 | Power in |
| 3 | R | Output |
| 4 | RE | Input |
| 5 | DE | Input |
| 6 | D | Input |
| 7 | NC | Not connected |
| 8 | GND1 | Passive |
| 9 | GND2 | Power in |
| 10 | VCC2 | Power in |
| 11 | NC | Not connected |
| 12 | A | Input/output |
| 13 | B | Input/output |
| 14 | NC | Not connected |
| 15 | GND2 | Passive |
| 16 | VCC2 | Passive |
Philip-Kiehnle/PVBatteryInverter
High efficient PV charging of HV-Battery with 650V-GaN power stage. A second GaN-power stage is used as a Single-Phase inverter, which enables high efficient self-consumption.
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
Yes. The symbol is Interface_UART:ISO1500 and the footprint Package_SO:SSOP-16_3.9x4.9mm_P0.635mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SSOP-16-150mil, with 16 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2671333, with 8,949 in stock; the sellers' links on this page open their listings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.