ISO1212DBQ

Texas InstrumentsExtended

-40℃~+125℃ 2 2500 4Mbps 70kV/us Bipolar input、Broken wire detection IO SSOP-16-150mil DI/DO Isolators ROHS

Part id: ti/ISO1212DBQ
Category: DI, DO Isolators
Package: SSOP-16-150mil
Pins: 16
In stock: 52 at JLCPCB (C2863240)
Used on: 4 open-source boards

Overview

The ISO1212DBQ is a DI, DO Isolator made by Texas Instruments in a SSOP-16-150mil package with 16 pins. -40℃~+125℃ 2 2500 4Mbps 70kV/us Bipolar input、Broken wire detection IO SSOP-16-150mil DI/DO Isolators ROHS.

PCBKit's library has its KiCad symbol (Isolator:ISO1212, from KiCad's library) and its footprint (Package_SO:SSOP-16_3.9x4.9mm_P0.635mm, from KiCad's library), ready for a KiCad board. 52 are in stock at JLCPCB (part C2863240). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

Isolator:ISO1212From KiCad's library

Footprint

Package_SO:SSOP-16_3.9x4.9mm_P0.635mmFrom KiCad's library

Pinout

The pins of the ISO1212DBQ
Pin	Name	Type
1	GND1	Power in
2	VCC1	Power in
3	EN	Input
4	OUT1	Tri-state
5	OUT2	Tri-state
6	NC	Not connected
7	NC	Not connected
8	GND1	Passive
9	FGND2	Power in
10	IN2	Input
11	SENSE2	Input
12	SUB2	Passive
13	SUB1	Passive
14	FGND1	Power in
15	IN1	Input
16	SENSE1	Input

Parameters

CMTI(kV/us): 70kV/us
Data Rate(Max): 4Mbps
Features: Broken wire detection
Isolation Voltage(Vrms): 2500
Number of Input Channels: 2
Operating Temperature: -40℃~+125℃
Output Interface: IO

Order codes

ISO1212DBQLCSC C2863240

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/ti/ISO1212DBQ" title="ISO1212DBQ in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

2 layers115 × 100 mm
Cog1
diegodemarco/cog1
cog1 is an open-source industrial IoT gateway (hardware and software) built as a motherboard hosting an Orange Pi Zero 3 Linux SBC.
133 parts6MIT
4 layers180 × 120 mm
Edge18-main rev a
Gecesars/18-gateway-industrial
Gateway Industrial Modbus/CAN Universal — baseline técnica e acompanhamento do projeto
185 parts
2 layers160 × 68 mm
C0-dev
rm-1n/conduit
poe microcontroller with web IDE + firmware upload
456 partsMIT
4 layers100 × 85 mm
Tinkerforge tng di8 di8
oomlout/oomlout_oomp_project_bot_v_2

131 parts

Parts like it

ISO1212DBQR
SSOP-16-150mil-40℃~+125℃ 2 2500 4Mbps 70kV/us Bipolar input、Broken wire detection IO SSOP-16-150mil DI/DO Isolators ROHSTexas InstrumentsDI/DO Isolators

Questions

Is there a KiCad symbol and footprint for the ISO1212DBQ?

Yes. The symbol is Isolator:ISO1212 and the footprint Package_SO:SSOP-16_3.9x4.9mm_P0.635mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ISO1212DBQ?

SSOP-16-150mil, with 16 pins. Its footprint is drawn on this page.

Where is the ISO1212DBQ datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ISO1212DBQ?

JLCPCB lists it as part C2863240, with 52 in stock; the sellers' links on this page open their listings.

What can replace the ISO1212DBQ?

Parts like it in the library: the ISO1212DBQR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ISO1212DBQ?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.