Skip to the content
1234567891011121314

ISM330DHCXTR

Texas InstrumentsExtended

LGA-14L New Arrivals ROHS

Part id
ti/ISM330DHCXTR
Category
Uncategorised
Package
LGA-14L
Pins
14
In stock
0 at JLCPCB (C717698)
Used on
15 open-source boards

Overview

The ISM330DHCXTR is an uncategorised made by Texas Instruments in a LGA-14L package with 14 pins. LGA-14L New Arrivals ROHS.

PCBKit's library has its KiCad symbol (Sensor_Motion:ISM330DHCX, from KiCad's library) and its footprint (Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C717698). 15 open-source boards in 9 repositories on GitHub use it.

Symbol

1SDO/SA02SDx3SCx4INT15VDDIO6GND8VDD9INT210OCS_AUX11SDO_AUX12CS13SCL14SDA
Sensor_Motion:ISM330DHCXFrom KiCad's library

Footprint

1234567891011121314
Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yFrom KiCad's library

Pinout

14
The pins of the ISM330DHCXTR
PinNameType
1SDO/SA0Output
2SDxInput/output
3SCxInput
4INT1Output
5VDDIOPower in
6GNDPower in
7GNDPassive
8VDDPower in
9INT2Output
10OCS_AUXPassive
11SDO_AUXPassive
12CSInput
13SCLInput
14SDAInput/output

Open-source boards using it

15See all 15
  • 8 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    cdg66/ExAce

    Framework ExpansionFPGA acceleration module

    207 parts37CC-BY-4.0
  • 4 layers48.3 × 24.1 mmCapstone, the printed circuit board in 3D

    Capstone

    mct814/Pipe-Mapping-Project

    58 parts2MIT
  • 4 layers50 × 50 mmWatch, the printed circuit board in 3D

    Watch

    plumpastry/PHW

    Plum's Embedded Devices Hardware and Firmware

    99 parts2
  • 4 layers51.1 × 65.3 mmNAV V3 final, the printed circuit board in 3D

    NAV V3 final

    nammenam/stash

    A collection of topics and ideas to explore and learn

    67 parts
  • 4 layers90 × 60 mmVW MTC1, the printed circuit board in 3D

    VW MTC1

    Sajeevanveeriah/Ataxia-Monitor

    Real-Time Ataxia Monitor

    154 partsUnlicense
  • 4 layers29.7 × 27.6 mmDotBot LH2-Shield, the printed circuit board in 3D

    DotBot LH2-Shield

    DotBots/DotBot-hardware

    DotBot hardware documents

    23 parts5BSD-3-Clause
  • 4 layers42.5 × 32 mmIMU V1, the printed circuit board in 3D

    IMU V1

    sundevilmotorsports/pcb-dev

    PCB development repository

    83 parts3

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the ISM330DHCXTR?

Yes. The symbol is Sensor_Motion:ISM330DHCX and the footprint Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ISM330DHCXTR?

LGA-14L, with 14 pins. Its footprint is drawn on this page.

Where can I order the ISM330DHCXTR?

JLCPCB lists it as part C717698, with 0 in stock; the sellers' links on this page open their listings.

What can replace the ISM330DHCXTR?

Parts like it in the library: the IIS3DWBG1 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ISM330DHCXTR?

15 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.