Skip to the content
12345678

INA333AIDGKT

Texas InstrumentsExtended

-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 0.16V/us 1 1.8V~5.5V 100dB 100nV/℃ 200pA 25uV 5.5V 50nV/√Hz 50pA 50uA 50us 5mA Rail-to-Rail Output VSSOP-8 Instrumentation Amplifiers ROHS

Part id
ti/INA333AIDGKT
Category
Instrumentation Amplifiers
Package
VSSOP-8
Pins
8
In stock
148 at JLCPCB (C2057648)
Used on
1 open-source board

Overview

The INA333AIDGKT is an instrumentation Amplifier made by Texas Instruments in a VSSOP-8 package with 8 pins. -2.75V~-900mV、900mV~2.75V -40℃~+125℃ 0.16V/us 1 1.8V~5.5V 100dB 100nV/℃ 200pA 25uV 5.5V 50nV/√Hz 50pA 50uA 50us 5mA Rail-to-Rail Output VSSOP-8 Instrumentation Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Instrumentation:INA333xxDGK, from KiCad's library) and its footprint (Package_SO:VSSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 148 are in stock at JLCPCB (part C2057648). 1 open-source board in 1 repository on GitHub use it.

Symbol

1Rg2-3+4V-5Ref67V+8Rg
Amplifier_Instrumentation:INA333xxDGKFrom KiCad's library

Footprint

12345678
Package_SO:VSSOP-8_3x3mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the INA333AIDGKT
PinNameType
1RgPassive
2-Input
3+Input
4V-Power in
5RefInput
6—Output
7V+Power in
8RgPassive

Open-source boards using it

1
  • 2 layers72.4 × 27.3 mmStimulus driver, the printed circuit board in 3D

    Stimulus driver

    flintwinters/electrode

    This repository contains a single INA333/OPA2192/TLC555/LM386M-1 sonifier schematic. The PCB retains its manual footprint placement and has a provisional two-layer signal route with one PGND net and thermal-relief pours…

    48 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the INA333AIDGKT?

Yes. The symbol is Amplifier_Instrumentation:INA333xxDGK and the footprint Package_SO:VSSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the INA333AIDGKT?

VSSOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the INA333AIDGKT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the INA333AIDGKT?

JLCPCB lists it as part C2057648, with 148 in stock; the sellers' links on this page open their listings.

What can replace the INA333AIDGKT?

Parts like it in the library: the INA332AIDGKR by Texas Instruments, the INA326EA/2K5 by Texas Instruments, the INA126EA/2K5 by Texas Instruments and the INA155EA/2K5 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the INA333AIDGKT?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.