INA300AIDSQT

Texas InstrumentsExtended

-40℃~+125℃@(TA) 135uA 2.7V~5.5V Active Low Current Sensor Open-drain WSON-10-EP(2x2) Supervisor and Reset ICs ROHS

Part id: ti/INA300AIDSQT
Category: Supervisor And Reset ICs
Package: WSON-10-EP(2x2)
Pins: 11
In stock: 118 at JLCPCB (C133581)
Used on: 2 open-source boards

Overview

The INA300AIDSQT is a supervisor And Reset IC made by Texas Instruments in a WSON-10-EP(2x2) package with 11 pins. -40℃~+125℃@(TA) 135uA 2.7V~5.5V Active Low Current Sensor Open-drain WSON-10-EP(2x2) Supervisor and Reset ICs ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:INA300AIDSQT, from EasyEDA) and its footprint (EasyEDA_Cloud:WSON-10_L2.0-W2.0-P0.40-BL-EP, from EasyEDA), ready for a KiCad board. 118 are in stock at JLCPCB (part C133581). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

EasyEDA_Cloud:INA300AIDSQTFrom EasyEDA

Footprint

EasyEDA_Cloud:WSON-10_L2.0-W2.0-P0.40-BL-EPFrom EasyEDA

Pinout

The pins of the INA300AIDSQT
Pin	Name	Type
1	IN+	Unspecified
2	IN-	Unspecified
3	LIMIT	Unspecified
4	ENABLE	Unspecified
5	ALERT#	Unspecified
6	LATCH	Unspecified
7	DELAY	Unspecified
8	GND	Unspecified
9	VS	Unspecified
10	HYS	Unspecified
11	EPAD	Unspecified

Parameters

ChipType: Current Sensor
Operating Temperature: -40℃~+125℃@(TA)
Output Type: Open-drain
Quiescent Current: 135uA
Reset Active Level: Active Low
Voltage - Supply: 2.7V~5.5V

Order codes

INA300AIDSQTLCSC C133581

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/ti/INA300AIDSQT" title="INA300AIDSQT in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

8 layers90.2 × 101.1 mm
RevC fm
Sierra-Lobo/mainboard-hardware
PyCubed mainboard v5 fork by Sierra Lobo for Foras Promineo CubeSat
644 parts1
2 layers120 × 60 mm
Robosub Power
ryos17/robosub-ee
Stanford Robosub Electrical Repository
49 parts1

Questions

Is there a KiCad symbol and footprint for the INA300AIDSQT?

Yes. The symbol is EasyEDA_Cloud:INA300AIDSQT and the footprint EasyEDA_Cloud:WSON-10_L2.0-W2.0-P0.40-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the INA300AIDSQT?

WSON-10-EP(2x2), with 11 pins. Its footprint is drawn on this page.

Where is the INA300AIDSQT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the INA300AIDSQT?

JLCPCB lists it as part C133581, with 118 in stock; the sellers' links on this page open their listings.

Which open-source boards use the INA300AIDSQT?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.