Skip to the content
12345678

INA240A3PW

Texas InstrumentsExtended

-40℃~+125℃ -4V~80V 1 1.8mA 100V/V 132dB 2.7V~5.5V 250nV/℃ 2V/us 400kHz 40nV/√Hz@1kHz 5uV 90uA Bidirectional detection、Zero drift / auto-zero、Programmable output reference level、Analog output interface ±80V TSSOP-8 Current Sense Amplifiers ROHS

Part id
ti/INA240A3PW
Category
Current Sense Amplifiers
Package
TSSOP-8
Pins
8
In stock
2 at JLCPCB (C544538)
Used on
1 open-source board

Overview

The INA240A3PW is a current Sense Amplifier made by Texas Instruments in a TSSOP-8 package with 8 pins. -40℃~+125℃ -4V~80V 1 1.8mA 100V/V 132dB 2.7V~5.5V 250nV/℃ 2V/us 400kHz 40nV/√Hz@1kHz 5uV 90uA Bidirectional detection、Zero drift / auto-zero、Programmable output reference level、Analog output interface ±80V TSSOP-8 Current Sense Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Current:INA240A3PW, from KiCad's library) and its footprint (Package_SO:TSSOP-8_4.4x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2 are in stock at JLCPCB (part C544538). 1 open-source board in 1 repository on GitHub use it.

Symbol

2+3-4GND5V+6REF27REF18
Amplifier_Current:INA240A3PWFrom KiCad's library

Footprint

12345678
Package_SO:TSSOP-8_4.4x3mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the INA240A3PW
PinNameType
1GNDPassive
2+Input
3-Input
4GNDPower in
5V+Power in
6REF2Passive
7REF1Passive
8—Output

Open-source boards using it

1
  • 2 layers59.7 × 17.8 mmEgan, the printed circuit board in 3D

    Egan

    cajt/pmod-power-half-bridge

    This is a power electronics building block for use with an FPGA board that supports PMOD Interfaces. It contains a GAN based half-bridge, an optional LC low-pass output filter, and two ADCs for current and voltage…

    31 partsBSD-3-Clause

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the INA240A3PW?

Yes. The symbol is Amplifier_Current:INA240A3PW and the footprint Package_SO:TSSOP-8_4.4x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the INA240A3PW?

TSSOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the INA240A3PW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the INA240A3PW?

JLCPCB lists it as part C544538, with 2 in stock; the sellers' links on this page open their listings.

What can replace the INA240A3PW?

Parts like it in the library: the INA240A1PW by Texas Instruments, the CSA240LCTSSOP8 by analogysemi, the INA240A1QPWRQ1 by Texas Instruments and the INA240A2PW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the INA240A3PW?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.