INA238AIDGS
Texas Instruments
85-V, 16-Bit, High-Precision Power Monitor with I2C Interface
- Part id
- ti/INA238AIDGS
- Category
- Uncategorised
- Package
- MSOP10
- Pins
- 10
Overview
The INA238AIDGS is an uncategorised made by Texas Instruments in a MSOP10 package with 10 pins. 85-V, 16-Bit, High-Precision Power Monitor with I2C Interface.
PCBKit's library has its KiCad symbol (Sensor_Energy:INA238, from KiCad's library) and its footprint (Package_SO:MSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | A1 | Input |
| 2 | A0 | Input |
| 3 | Alert | Open collector |
| 4 | SDA | Input/output |
| 5 | SCL | Input |
| 6 | VS | Power in |
| 7 | GND | Power in |
| 8 | Vbus | Input |
| 9 | Vin- | Input |
| 10 | Vin+ | Input |
Parts like it
8
MS5112M
MSOP-10-40℃~+125℃ 16 2 2.7V~5.5V 240Hz 275kHz 290uA Built-in Built-in I2C Multiplexers、Power-on reset、Bipolar input、Integrated modulator、Built-in digital filter Sigma-Delta Support Yes MSOP-10 Analog to Digital Converters (ADC) ROHSHangzhou Ruimeng TechUncategorisedLKP4153MS
MSOP-10MSOP-10 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSLKWICUncategorisedXADC084S021-XC
MSOP-10-40℃~+85℃ 0.4LSB 1.6MHz~6.4MHz 2.7V~5.25V 200kHz 4 49.5dB 8 Built-in External Multiplexers No Not supported SAR SPI MSOP-10 Analog to Digital Converters (ADC) ROHSSi-ChangeUncategorisedXADC084S051-XC
MSOP-10-40℃~+85℃ 0.5LSB 2.7V~5.25V 3.2MHz~8MHz 4 49.5dB 500kHz 8 Built-in External Multiplexers No SAR SPI MSOP-10 Analog to Digital Converters (ADC) ROHSSi-ChangeUncategorisedVP3481MSG10-B
MSOP-10UncategorisedVIVALTC5223YV10
MSOP-10LUncategorisedLinearinTPC5180-VS2R
MSOP10Multi-chip synchronization、Synchronous triggering MSOP10 Analog to Digital Converters (ADC) ROHS3PEAKUncategorisedTPC6160IS-VS2R
MSOP10MSOP10 Analog to Digital Converters (ADC) ROHS3PEAKUncategorised
Questions
Is there a KiCad symbol and footprint for the INA238AIDGS?
Yes. The symbol is Sensor_Energy:INA238 and the footprint Package_SO:MSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the INA238AIDGS?
MSOP10, with 10 pins. Its footprint is drawn on this page.
What can replace the INA238AIDGS?
Parts like it in the library: the MS5112M by Hangzhou Ruimeng Tech, the LKP4153MS by LKWIC, the XADC084S021-XC by Si-Change and the XADC084S051-XC by Si-Change. Check their datasheets: a part that fits the footprint may still differ in its ratings.