Skip to the content

INA229AIDGSR

Texas InstrumentsExtended

-40℃~+125℃ 1 100pA 10nV/℃ 170dB 2.7V~5.5V 300nV 640uA 98V High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Power monitoring、Digital output interface、Programmable threshold alarm、Integrated ADC、Enable/shutdown function、Integrated shunt ±163.84mV VSSOP-10 Current Sense Amplifiers ROHS

Part id
ti/INA229AIDGSR
Category
Current Sense Amplifiers
Package
VSSOP-10
Pins
10
In stock
0 at JLCPCB (C2846803)
Used on
4 open-source boards

Overview

The INA229AIDGSR is a current Sense Amplifier made by Texas Instruments in a VSSOP-10 package with 10 pins. -40℃~+125℃ 1 100pA 10nV/℃ 170dB 2.7V~5.5V 300nV 640uA 98V High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Power monitoring、Digital output interface、Programmable threshold alarm、Integrated ADC、Enable/shutdown function、Integrated shunt ±163.84mV VSSOP-10 Current Sense Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Sensor_Energy:INA229, from KiCad's library) and its footprint (Package_SO:TSSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2846803). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1CS2MOSI3ALERT4MISO5SCLK6VS7GND8VBUS9IN-10IN+
Sensor_Energy:INA229From KiCad's library

Footprint

Package_SO:TSSOP-10_3x3mm_P0.5mmFrom KiCad's library

Pinout

10
The pins of the INA229AIDGSR
PinNameType
1CSInput
2MOSIInput
3ALERTOpen collector
4MISOTri-state
5SCLKInput
6VSPower in
7GNDPower in
8VBUSInput
9IN-Input
10IN+Input

Open-source boards using it

4
  • 4 layers123 × 75 mmMppt, the printed circuit board in 3D

    Mppt

    dimembermatt/mighty-mppt

    195 parts1CERN-OHL-P-2.0
  • 2 layers63.8 × 44 mmPd sniffer, the printed circuit board in 3D

    Pd sniffer

    Badbird5907/pd-sniffer

    44 parts
  • 2 layers180 × 80 mmProyecto0.1V, the printed circuit board in 3D

    Proyecto0.1V

    UTN-FRBA-2026-PF-EE-GP10/mpp_sdk

    ☀️ MPP simulation and validation framework

    168 partsMIT
  • 2 layers101.2 × 86.5 mmWindmeasureboard, the printed circuit board in 3D

    Windmeasureboard

    GGoodacre/WindChargeController-Capstone2024

    Solar Charge Controller for BEng Capstone 2024

    28 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the INA229AIDGSR?

Yes. The symbol is Sensor_Energy:INA229 and the footprint Package_SO:TSSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the INA229AIDGSR?

VSSOP-10, with 10 pins. Its footprint is drawn on this page.

Where is the INA229AIDGSR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the INA229AIDGSR?

JLCPCB lists it as part C2846803, with 0 in stock; the sellers' links on this page open their listings.

What can replace the INA229AIDGSR?

Parts like it in the library: the INA226AIDGSR by Texas Instruments, the INA237AIDGSR by Texas Instruments, the INA233AIDGS by Texas Instruments and the INA228AIDGS by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the INA229AIDGSR?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.