INA220BIDGS
Texas InstrumentsExtended
-40℃~+125℃ 2 3V~5.5V 40us 6uA Current Sensor Open-drain VSSOP-10-0.5mm Current Sense Amplifiers ROHS
- Part id
- ti/INA220BIDGS
- Category
- Supervisor And Reset ICs
- Package
- VSSOP-10-0.5mm
- Pins
- 10
- In stock
- 1 at JLCPCB (C2870648)
Overview
The INA220BIDGS is a supervisor And Reset IC made by Texas Instruments in a VSSOP-10-0.5mm package with 10 pins. -40℃~+125℃ 2 3V~5.5V 40us 6uA Current Sensor Open-drain VSSOP-10-0.5mm Current Sense Amplifiers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:INA220BIDGST, from EasyEDA) and its footprint (EasyEDA_Cloud:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL, from EasyEDA), ready for a KiCad board. 1 are in stock at JLCPCB (part C2870648).
Symbol
Footprint
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | A1 | Unspecified |
| 2 | A0 | Unspecified |
| 3 | NC | Unspecified |
| 4 | SDA | Unspecified |
| 5 | SCL | Unspecified |
| 6 | VS | Unspecified |
| 7 | GND | Unspecified |
| 8 | VBUS | Unspecified |
| 9 | IN- | Unspecified |
| 10 | IN+ | Unspecified |
Parts like it
8
TPS2491DGSR
VSSOP-10-0.5mm-40℃~+85℃@(TA) 1mA 9V~80V Open-drain Voltage monitor VSSOP-10-0.5mm Power Distribution Switches ROHSTexas InstrumentsSupervisor And Reset ICsINA230AIDGS
VSSOP-10-40℃~+125℃ 2.7V~5.5V 330uA Current monitor Open-drain VSSOP-10 Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICsTPS2491DGS
VSSOP-10-0.5mm-40℃~+85℃ 9V~80V Operating status indication、Adjustable current limiting、Hiccup current limiting VSSOP-10-0.5mm Power Distribution Switches ROHSTexas InstrumentsSupervisor And Reset ICsLM3704XCMM-308
VSSOP-10-0.5mm-40℃~+85℃ 1 140ms 1V~5.5V 28uA 3.08V Active Low Manual reset input Push-pull Simple Reset/Power-On Reset VSSOP-10-0.5mm Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICsINA220BQDGSRQ1
VSSOP-10-0.5mm-40℃~+125℃ 2 3V~5.5V 700uA Current monitor Open-drain VSSOP-10-0.5mm Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICsLM3704XDMM-220
VSSOP-10-40℃~+85℃ 1 1.6s 2.2V Active High Manual reset input Push-pull Voltage monitor VSSOP-10 Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICsLM3710XQMM-308
VSSOP-10Supervisor And Reset ICsTexas InstrumentsLM3710YQMM-232
VSSOP-10-40℃~+85℃@(TJ) 1 140ms 2.32V Active Low Open-drain Simple Reset/Power-On Reset VSSOP-10 Supervisor and Reset ICsTexas InstrumentsSupervisor And Reset ICs
Questions
Is there a KiCad symbol and footprint for the INA220BIDGS?
Yes. The symbol is EasyEDA_Cloud:INA220BIDGST and the footprint EasyEDA_Cloud:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the INA220BIDGS?
VSSOP-10-0.5mm, with 10 pins. Its footprint is drawn on this page.
Where is the INA220BIDGS datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the INA220BIDGS?
JLCPCB lists it as part C2870648, with 1 in stock; the sellers' links on this page open their listings.
What can replace the INA220BIDGS?
Parts like it in the library: the TPS2491DGSR by Texas Instruments, the INA230AIDGS by Texas Instruments, the TPS2491DGS by Texas Instruments and the LM3704XCMM-308 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.