INA110SG
Texas InstrumentsExtended
-55℃~+125℃ 1.5mA 100kHz 106dB 25mA 270V/us 2uV/℃ 50pA 50uV External resistor gain、Internally set gain、Overvoltage Protection Single-channel CDIP-16 Instrumentation Amplifiers ROHS
- Part id
- ti/INA110SG
- Category
- Instrumentation Amplifiers
- Package
- CDIP-16
- Pins
- 16
- In stock
- 0 at JLCPCB (C4370647)
Overview
The INA110SG is an instrumentation Amplifier made by Texas Instruments in a CDIP-16 package with 16 pins. -55℃~+125℃ 1.5mA 100kHz 106dB 25mA 270V/us 2uV/℃ 50pA 50uV External resistor gain、Internally set gain、Overvoltage Protection Single-channel CDIP-16 Instrumentation Amplifiers ROHS.
PCBKit's library has its KiCad symbol (Operational Amplifiers:INA110, from CERN's library) and its footprint (Networks THD:SBDIP16-300, from CERN's library), ready for a KiCad board. JLCPCB lists it (part C4370647).
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | VIN- | Input |
| 2 | VIN+ | Input |
| 3 | RG | Input |
| 4 | OFFSET | Input |
| 5 | OFFSET | Input |
| 6 | REF | Input |
| 7 | -VCC | Power in |
| 8 | +VCC | Power in |
| 9 | OUT | Output |
| 10 | Sense | Input |
| 11 | x500 | Input |
| 12 | x100 | Input |
| 13 | x10 | Passive |
| 14 | OFFSET | Input |
| 15 | OFFSET | Input |
| 16 | x200 | Input |
Questions
Is there a KiCad symbol and footprint for the INA110SG?
Yes. The symbol is Operational Amplifiers:INA110 and the footprint Networks THD:SBDIP16-300, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the INA110SG?
CDIP-16, with 16 pins. Its footprint is drawn on this page.
Where is the INA110SG datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the INA110SG?
JLCPCB lists it as part C4370647, with 0 in stock; the sellers' links on this page open their listings.