Skip to the content

HI7106CPL

Texas InstrumentsExtended

0℃~+70℃ 48kHz 600uA Auto calibration Built-in Not supported Yes PDIP-40 Analog to Digital Converters (ADC)

Part id
ti/HI7106CPL
Category
Analog To Digital Converters (ADC)
Package
PDIP-40
Pins
5
In stock
0 at JLCPCB (C3191454)

Overview

The HI7106CPL is an analog To Digital Converter made by Texas Instruments in a PDIP-40 package with 5 pins. 0℃~+70℃ 48kHz 600uA Auto calibration Built-in Not supported Yes PDIP-40 Analog to Digital Converters (ADC).

PCBKit's library has its footprint (Package_DIP:DIP-40_W25.4mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3191454).

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the HI7106CPL?

Yes. the footprint Package_DIP:DIP-40_W25.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HI7106CPL?

PDIP-40, with 5 pins. Its footprint is drawn on this page.

Where is the HI7106CPL datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the HI7106CPL?

JLCPCB lists it as part C3191454, with 0 in stock; the sellers' links on this page open their listings.

What can replace the HI7106CPL?

Parts like it in the library: the HT7106ANZ by HTCSEMI, the HT7126ANZ by HTCSEMI, the HT7136ANZ by HTCSEMI and the TC7117CKW by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.