Skip to the content
123456

HDC2022DEPR

Texas InstrumentsExtended

-40℃~+125℃ 0%RH~100%RH 1.62V~3.6V 550nA Built-in heater I2C ±0.4℃ ±3%RH WSON-6(3x3) Temperature and Humidity Sensor ROHS

Part id
ti/HDC2022DEPR
Category
Temperature And Humidity Sensor
Package
WSON-6(3x3)
Pins
7
In stock
0 at JLCPCB (C2873412)
Used on
2 open-source boards

Overview

The HDC2022DEPR is a temperature And Humidity Sensor made by Texas Instruments in a WSON-6(3x3) package with 7 pins. -40℃~+125℃ 0%RH~100%RH 1.62V~3.6V 550nA Built-in heater I2C ±0.4℃ ±3%RH WSON-6(3x3) Temperature and Humidity Sensor ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:HDC2022DEPT, from EasyEDA) and its footprint (EasyEDA_Cloud:WSON-6_L3.0-W3.0-P1.00-TL-EP_HDC2021DEBR, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C2873412). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

6SCL1SDA3ADDR4DRDY/INT7EP2GND5VDD
EasyEDA_Cloud:HDC2022DEPTFrom EasyEDA

Footprint

123456
EasyEDA_Cloud:WSON-6_L3.0-W3.0-P1.00-TL-EP_HDC2021DEBRFrom EasyEDA

Pinout

7
The pins of the HDC2022DEPR
PinNameType
1SDAUnspecified
2GNDUnspecified
3ADDRUnspecified
4DRDY/INTUnspecified
5VDDUnspecified
6SCLUnspecified
7EPUnspecified

Open-source boards using it

2
  • 2 layers54 × 54 mmHT07, the printed circuit board in 3D

    HT07

    cuplsensor/cupltag

    cupl Tag Firmware and Hardware

    35 parts16
  • 4 layers67.7 × 43.9 mmSTM32Lora Tempreture sensor, the printed circuit board in 3D

    STM32Lora Tempreture sensor

    AndreyPodlesni/stm32wl-lora-rf-pcb

    4-layer RF PCB design of a low-power LoRa sensor node based on STM32WLE5CCU6, featuring 50Ω controlled impedance RF routing, SMA antenna interface, and HDC2022 temperature & humidity sensor. Designed in KiCad.

    60 parts2MIT

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the HDC2022DEPR?

Yes. The symbol is EasyEDA_Cloud:HDC2022DEPT and the footprint EasyEDA_Cloud:WSON-6_L3.0-W3.0-P1.00-TL-EP_HDC2021DEBR, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HDC2022DEPR?

WSON-6(3x3), with 7 pins. Its footprint is drawn on this page.

Where is the HDC2022DEPR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the HDC2022DEPR?

JLCPCB lists it as part C2873412, with 0 in stock; the sellers' links on this page open their listings.

What can replace the HDC2022DEPR?

Parts like it in the library: the HDC2021DEBR by Texas Instruments and the HDC1050DMBR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the HDC2022DEPR?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.