6 layers103.1 × 59.6 mm
DRV8818
Texas Instruments
- Part id
- ti/DRV8818
- Category
- Uncategorised
- Pins
- 29
- Used on
- 2 open-source boards
Overview
The DRV8818 is an uncategorised made by Texas Instruments with 29 pins.
PCBKit's library has its KiCad symbol (Celestial_Driver_Motor:TI DRV8818, from Altium's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
The library has no footprint for this part yet.
Pinout
29| Pin | Name | Type |
|---|---|---|
| 1 | ISENA | Passive |
| 2 | HOME | Passive |
| 3 | DIR | Passive |
| 4 | AOUT1 | Passive |
| 5 | DECAY | Passive |
| 6 | RCA | Passive |
| 7 | GND | Passive |
| 8 | VREF | Passive |
| 9 | RCB | Passive |
| 10 | VCC | Passive |
| 11 | BOUT1 | Passive |
| 12 | USM1 | Passive |
| 13 | USM0 | Passive |
| 14 | ISENB | Passive |
| 15 | VMB | Passive |
| 16 | SR | Passive |
| 17 | RESET | Passive |
| 18 | BOUT2 | Passive |
| 19 | STEP | Passive |
| 20 | VGD | Passive |
| 21 | GND | Passive |
| 22 | VCP | Passive |
| 23 | CP1 | Passive |
| 24 | CP2 | Passive |
| 25 | AOUT2 | Passive |
| 26 | ENABLE | Passive |
| 27 | SLEEP | Passive |
| 28 | VMA | Passive |
| 29 | GND | Passive |
Open-source boards using it
2- 6 layers103.1 × 59.6 mm
Questions
Is there a KiCad symbol and footprint for the DRV8818?
Yes. The symbol is Celestial_Driver_Motor:TI DRV8818, both drawn on this page. PCBKit places them on a board for you when you design with it.
Which open-source boards use the DRV8818?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.