2 layers101.3 × 73.7 mm
DRV8701ERGET
Texas InstrumentsExtended
-40℃~+125℃ 1.5V 150mA 300mA 4 5.9V~45V 6mA 800mV Enable shutdown、Interleaved conduction protection、Dead-time control、Charge pump boost Full Bridge MOSFET VQFN-24(4x4) Gate Drivers ROHS
- Part id
- ti/DRV8701ERGET
- Category
- Brushed DC Motor Drivers
- Package
- VQFN-24(4x4)
- Pins
- 25
- In stock
- 0 at JLCPCB (C132049)
- Used on
- 2 open-source boards
Overview
The DRV8701ERGET is a brushed DC Motor Driver made by Texas Instruments in a VQFN-24(4x4) package with 25 pins. -40℃~+125℃ 1.5V 150mA 300mA 4 5.9V~45V 6mA 800mV Enable shutdown、Interleaved conduction protection、Dead-time control、Charge pump boost Full Bridge MOSFET VQFN-24(4x4) Gate Drivers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:DRV8701ERGET, from EasyEDA) and its footprint (EasyEDA_Cloud:VQFN-24_L4.0-W4.0-P0.50-BL-EP2.5, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C132049). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
25| Pin | Name | Type |
|---|---|---|
| 1 | VM | Unspecified |
| 2 | VCP | Unspecified |
| 3 | CPH | Unspecified |
| 4 | CPL | Unspecified |
| 5 | GND | Unspecified |
| 6 | VREF | Unspecified |
| 7 | AVDD | Unspecified |
| 8 | DVDD | Unspecified |
| 9 | nFAULT | Unspecified |
| 10 | SNSOUT | Unspecified |
| 11 | SO | Unspecified |
| 12 | IDRIVE | Unspecified |
| 13 | nSLEEP | Unspecified |
| 14 | EN | Unspecified |
| 15 | PH | Unspecified |
| 16 | GND | Unspecified |
| 17 | GH1 | Unspecified |
| 18 | SH1 | Unspecified |
| 19 | GL1 | Unspecified |
| 20 | SN | Unspecified |
| 21 | SP | Unspecified |
| 22 | GL2 | Unspecified |
| 23 | SH2 | Unspecified |
| 24 | GH2 | Unspecified |
| 25 | EP | Unspecified |
Open-source boards using it
2- 4 layers70.1 × 71 mm
Mixed signal board
YJM00/Mixed-Signal-Board-PI-SI-PCB-
즉, 이 프로젝트는 단순 회로 작성이 아니라 System-level Requirement를 기반으로 실제 제작 가능한 형태의 STM32 Mixed-Signal 보드를 설계한 HW 설계 프로젝트입니다.
188 parts
Parts like it
1
Questions
Is there a KiCad symbol and footprint for the DRV8701ERGET?
Yes. The symbol is EasyEDA_Cloud:DRV8701ERGET and the footprint EasyEDA_Cloud:VQFN-24_L4.0-W4.0-P0.50-BL-EP2.5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DRV8701ERGET?
VQFN-24(4x4), with 25 pins. Its footprint is drawn on this page.
Where is the DRV8701ERGET datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the DRV8701ERGET?
JLCPCB lists it as part C132049, with 0 in stock; the sellers' links on this page open their listings.
What can replace the DRV8701ERGET?
Parts like it in the library: the DRV8701ERGER by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the DRV8701ERGET?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.