Skip to the content
41

DRV8353HRTAR

Texas InstrumentsExtended

-40℃~+125℃ 1.5V 20uA 25ns 25ns 3 700mA 700mA 800mV 9V~75V MOSFET Three Phase Under Voltage Protection、Over Current Protection、Overtemperature protection (OTP) WQFN-40-EP(6x6) Gate Drivers ROHS

Part id
ti/DRV8353HRTAR
Category
Motor Driver ICs
Package
WQFN-40-EP(6x6)
Pins
41
In stock
125 at JLCPCB (C2150766)
Used on
1 open-source board

Overview

The DRV8353HRTAR is a motor Driver IC made by Texas Instruments in a WQFN-40-EP(6x6) package with 41 pins. -40℃~+125℃ 1.5V 20uA 25ns 25ns 3 700mA 700mA 800mV 9V~75V MOSFET Three Phase Under Voltage Protection、Over Current Protection、Overtemperature protection (OTP) WQFN-40-EP(6x6) Gate Drivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:DRV8353HRTAT, from EasyEDA) and its footprint (EasyEDA_Cloud:WQFN-40_L6.0-W6.0-P0.50-TL-EP4.5, from EasyEDA), ready for a KiCad board. 125 are in stock at JLCPCB (part C2150766). 1 open-source board in 1 repository on GitHub use it.

Symbol

1CPL2CPH3VM4VDRAIN5VCP6GHA7SHA8GLA9SPA10SNA11SNB12SPB13GLB14SHB15GHB16GHC17SHC18GLC19SPC20SNC21SOC22SOB23SOA24VREF25AGND26nFAULT27MODE28IDRIVE29VDS30GAIN31ENABLE32INHA33INLA34INHB35INLB36INHC37INLC38DVDD39GND40VGLS41EP
EasyEDA_Cloud:DRV8353HRTATFrom EasyEDA

Footprint

41
EasyEDA_Cloud:WQFN-40_L6.0-W6.0-P0.50-TL-EP4.5From EasyEDA

Pinout

41
The pins of the DRV8353HRTAR
PinNameType
1CPLUnspecified
2CPHUnspecified
3VMUnspecified
4VDRAINUnspecified
5VCPUnspecified
6GHAUnspecified
7SHAUnspecified
8GLAUnspecified
9SPAUnspecified
10SNAUnspecified
11SNBUnspecified
12SPBUnspecified
13GLBUnspecified
14SHBUnspecified
15GHBUnspecified
16GHCUnspecified
17SHCUnspecified
18GLCUnspecified
19SPCUnspecified
20SNCUnspecified
21SOCUnspecified
22SOBUnspecified
23SOAUnspecified
24VREFUnspecified
25AGNDUnspecified
26nFAULTUnspecified
27MODEUnspecified
28IDRIVEUnspecified
29VDSUnspecified
30GAINUnspecified
31ENABLEUnspecified
32INHAUnspecified
33INLAUnspecified
34INHBUnspecified
35INLBUnspecified
36INHCUnspecified
37INLCUnspecified
38DVDDUnspecified
39GNDUnspecified
40VGLSUnspecified
41EPUnspecified

Open-source boards using it

1
  • 8 layers123.5 × 58 mmBLDC MC V1.0, the printed circuit board in 3D

    BLDC MC V1.0

    AhmedAbo-Eita/BLDC_Motor_Driver

    BLDC Motor Driver hardware and firmware project including power stage, gate driver, protection circuits, and control firmware for sensor-based and/or sensorless BLDC motors.

    234 parts1

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the DRV8353HRTAR?

Yes. The symbol is EasyEDA_Cloud:DRV8353HRTAT and the footprint EasyEDA_Cloud:WQFN-40_L6.0-W6.0-P0.50-TL-EP4.5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8353HRTAR?

WQFN-40-EP(6x6), with 41 pins. Its footprint is drawn on this page.

Where is the DRV8353HRTAR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8353HRTAR?

JLCPCB lists it as part C2150766, with 125 in stock; the sellers' links on this page open their listings.

What can replace the DRV8353HRTAR?

Parts like it in the library: the DRV8320RHRHAR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8353HRTAR?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.