Skip to the content
25

DRV8300DRGE

Texas InstrumentsExtended

-40℃~+125℃ 1.5A 10ns 3 5V~20V 5ns 750mA 800uA Interleaved conduction protection、Dead-time control、Built-in bootstrap diode Low Side、High Side MOSFET VQFN-24(4x4) Brushless DC (BLDC) Motor Driver ROHS

DatasheetJLCPCBLCSC
Part id
ti/DRV8300DRGE
Category
Gate Drivers
Package
VQFN-24(4x4)
Pins
25
In stock
44,764 at JLCPCB (C3655801)
Used on
2 open-source boards

Overview

The DRV8300DRGE is a gate Driver made by Texas Instruments in a VQFN-24(4x4) package with 25 pins. -40℃~+125℃ 1.5A 10ns 3 5V~20V 5ns 750mA 800uA Interleaved conduction protection、Dead-time control、Built-in bootstrap diode Low Side、High Side MOSFET VQFN-24(4x4) Brushless DC (BLDC) Motor Driver ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:DRV8300NRGER, from EasyEDA) and its footprint (EasyEDA_Cloud:VQFN-24_L4.0-W4.0-P0.50-TL-EP2.5, from EasyEDA), ready for a KiCad board. 44,764 are in stock at JLCPCB (part C3655801). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

INLA1INLB2INLC3GVDD4MODE5GND6NC7NC8GLC9GLB10GLA11SHC12GHC13BSTC14SHB15GHB16BSTB17SHA18GHA19BSTA20DT21INHA22INHB23INHC24EP25
EasyEDA_Cloud:DRV8300NRGERFrom EasyEDA

Footprint

25
EasyEDA_Cloud:VQFN-24_L4.0-W4.0-P0.50-TL-EP2.5From EasyEDA

From the datasheet

13
Supply, least
5 V · GVDD, recommended operating, min · p. 6
Supply, most
20 V · GVDD, recommended operating, max · p. 6
Supply, absolute maximum
21.5 V · GVDD, absolute maximum · p. 6
Works from
-40 °C · operating ambient temperature, min · p. 6
Works up to
125 °C · operating ambient temperature, max · p. 6
Junction, hottest
150 °C · operating junction temperature, max · p. 7
Takes working
825 µA · GVDD active mode, switching at 20 kHz, no FETs connected, typical · p. 7
Takes at most
1.4 mA · GVDD active mode, switching at 20 kHz, no FETs connected, max · p. 7
Takes asleep
800 µA · GVDD standby mode, INHx = INLx = 0, VBSTx = VGVDD, typical · p. 7
Junction to air (RGE (VQFN))
49.3 K/W · junction-to-ambient thermal resistance · p. 7
Junction to board (RGE (VQFN))
26.5 K/W · junction-to-board thermal resistance · p. 7
Junction to case (RGE (VQFN))
42.5 K/W · junction-to-case top thermal resistance · p. 7
Edge
12 ns · GLx fall time, 1000 pF load, VGVDD = VBSTx − VSHx > 8 V, SHx = 0 V, typical · p. 8

Open-source boards using it

2
  • 4 layers18.3 × 28.1 mmFalcon X4 Logic Board, the printed circuit board in 3D

    Falcon X4 Logic Board

    AT882/Falcon-X4-FPV-ESC-4-in-1-Logic-Board

    4-in-1 FPV ESC Logic board designed for UAV applications.

    114 parts
  • 6 layers40 × 40 mmDragonfangFC, the printed circuit board in 3D

    DragonfangFC

    Kozma04/dragonfang-fc

    190 parts

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the DRV8300DRGE?

Yes. The symbol is EasyEDA_Cloud:DRV8300NRGER and the footprint EasyEDA_Cloud:VQFN-24_L4.0-W4.0-P0.50-TL-EP2.5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8300DRGE?

VQFN-24(4x4), with 25 pins. Its footprint is drawn on this page.

Where is the DRV8300DRGE datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8300DRGE?

JLCPCB lists it as part C3655801, with 44,764 in stock; the sellers' links on this page open their listings.

What can replace the DRV8300DRGE?

Parts like it in the library: the DRV8300NRGE by Texas Instruments, the DRV8770RGE by Texas Instruments, the DRV8955PRGE by Texas Instruments and the DRV8932PRGE by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8300DRGE?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.