DRV5033FAQDBZ

Texas Instruments

-40℃~+125℃ 2.5V~38V 2.7mA 30kHz 30mA Omnipolar Open-drain ±5Gs ±6.8mT SOT-23 Hall Switches ROHS

Extended

Datasheetti/DRV5033FAQDBZ

Category: Hall Switches
Package: SOT-23
Pins: 3

Overview

The DRV5033FAQDBZ is a hall Switche made by Texas Instruments in a SOT-23 package with 3 pins. -40℃~+125℃ 2.5V~38V 2.7mA 30kHz 30mA Omnipolar Open-drain ±5Gs ±6.8mT SOT-23 Hall Switches ROHS.

PCBKit's library has its KiCad symbol (Sensor_Magnetic:DRV5033FAxDBZ, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 6,289 are in stock at JLCPCB (part C2869057).

Symbol

Sensor_Magnetic:DRV5033FAxDBZFrom KiCad's library

Footprint

Package_TO_SOT_SMD:SOT-23From KiCad's library

From the datasheet

Supply, least: 2.5 V · VCC, recommended operating minimum · p. 5
Supply, most: 38 V · VCC, recommended operating maximum · p. 5
Supply, absolute maximum: 40 V · VCC, absolute maximum · p. 5
Works from: -40 °C · TA, operating ambient minimum · p. 5
Works up to: 125 °C · TA, operating ambient maximum · p. 5
Junction, hottest: 150 °C · TJ, absolute maximum · p. 5
Takes working: 2.7 mA · VCC, typical operating current at 2.5 to 38 V, TA = 25°C · p. 6
Takes at most: 3.6 mA · VCC, maximum operating current at 2.5 to 38 V, TA = 125°C · p. 6
Current limit: 30 mA · OUT, typical overcurrent protection level, OUT shorted VCC · p. 6
A pin gives at most: 30 mA · OUT, maximum recommended sink current · p. 5
Junction to air (DBZ (SOT-23)): 333.2 K/W · junction-to-ambient thermal resistance · p. 5
Junction to case (DBZ (SOT-23)): 99.9 K/W · junction-to-case top thermal resistance · p. 5
Junction to board (DBZ (SOT-23)): 66.9 K/W · junction-to-board thermal resistance · p. 5
Edge: 31 ns · OUT, typical fall time, R1 = 1 kΩ, CO = 50 pF, VCC = 3.3 V · p. 6

What it is and has

Sensor: Digital omnipolar-switch Hall effect sensor · p. 1
Magnetic polarity: Detects north and south magnetic fields · p. 1
Sensitivity: FA: BOP ±3.5 mT, BRP ±2 mT · p. 1
Output: Open drain, 30-mA sink · p. 1
Package: 3-pin SOT-23 (DBZ) · p. 1
Protection: Reverse supply protection up to –22 V · p. 1
Protection: 40-V load dump · p. 1
Protection: Output short-circuit protection · p. 1
Protection: Output current limitation · p. 1
Sensor type: Digital omnipolar-switch Hall effect sensor · p. 1
Magnetic sensitivity: FA: BOP ±3.5 mT, BRP ±2 mT · p. 1
Magnetic polarity detection: North and south · p. 1
Temperature stability: BOP ±10% over temperature · p. 1

Around it

cap 0.01-µF (minimum): between VCC and GND; C1; ceramic, rated for VCC; place as close to the device as possible. · p. 16
res 10 kΩ: between OUT and REF; R1 example pullup; REF may be VCC. · p. 17
cap 680 pF: between OUT and GND; C2 optional ceramic filter capacitor; example with R1 = 10 kΩ. · p. 17
res 1 kΩ: between OUT and VCC; R1 in the alternative two-wire application at 12 V. · p. 18
cap 0.1 µF: between VCC and GND; Minimum local bypass C1 for the alternative two-wire application; increase for high power-line inductance. · p. 18

Specifications

Parameter	Conditions	As printed	Page
Power supply voltage VCC	Over operating free-air temperature range; negative limit ensured by design, only tested to –20 V	min -22 · max 40 V	5
Power supply voltage	Voltage ramp rate (VCC), VCC > 5 V	min 0 · max 2 V/us	5
Output pin voltage	Over operating free-air temperature range	min -0.5 · max 40 V	5
Output pin reverse current during reverse supply condition	Over operating free-air temperature range	min 0 · max 100 mA	5
Operating junction temperature TJ		min -40 · max 150 °C	5
Storage temperature Tstg		min -65 · max 150 °C	5
Electrostatic discharge V(ESD)	Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±2500 V	min -2500 · max 2500 V	5
Electrostatic discharge V(ESD)	Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ±500 V	min -500 · max 500 V	5
Power supply voltage VCC	Over operating free-air temperature range	min 2.5 · max 38 V	5
Output pin voltage (OUT) VO	Over operating free-air temperature range	min 0 · max 38 V	5
Output pin current sink (OUT) ISINK	Power dissipation and thermal limits must be observed	min 0 · max 30 mA	5
Operating ambient temperature TA		min -40 · max 125 °C	5
Junction-to-ambient thermal resistance RθJA	DBZ (SOT-23), 3 PINS	typ 333.2 °C/W	5
Junction-to-case (top) thermal resistance RθJC(top)	DBZ (SOT-23), 3 PINS	typ 99.9 °C/W	5
Junction-to-board thermal resistance RθJB	DBZ (SOT-23), 3 PINS	typ 66.9 °C/W	5
Junction-to-top characterization parameter ψJT	DBZ (SOT-23), 3 PINS	typ 4.9 °C/W	5
Junction-to-board characterization parameter ψJB	DBZ (SOT-23), 3 PINS	typ 65.2 °C/W	5
VCC operating voltage VCC	Over operating free-air temperature range	min 2.5 · max 38 V	6
Operating supply current ICC	VCC = 2.5 to 38 V, TA = 25°C	typ 2.7 mA	6
Operating supply current ICC	VCC = 2.5 to 38 V, TA = 125°C	typ 3 · max 3.6 mA	6
Power-on time ton	FA version; over operating free-air temperature range	typ 35 · max 70 us	6
FET on-resistance rDS(on)	VCC = 3.3 V, IO = 10 mA, TA = 25°C	typ 22 Ω	6
FET on-resistance rDS(on)	VCC = 3.3 V, IO = 10 mA, TA = 125°C	typ 36 · max 50 Ω	6
Off-state leakage current Ilkg(off)	Output Hi-Z; over operating free-air temperature range	max 1 uA	6
Reverse supply voltage VCCR	Over operating free-air temperature range	min -22 V	6
Overcurrent protection level IOCP	OUT shorted VCC; over operating free-air temperature range	min 15 · typ 30 · max 45 mA	6
Output delay time td	B = BRP – 10 mT to BOP + 10 mT in 1 us; over operating free-air temperature range	typ 13 · max 25 us	6
Output rise time (10% to 90%) tr	R1 = 1 kΩ, CO = 50 pF, VCC = 3.3 V; over operating free-air temperature range	typ 200 ns	6
Output fall time (90% to 10%) tf	R1 = 1 kΩ, CO = 50 pF, VCC = 3.3 V; over operating free-air temperature range	typ 31 ns	6
Bandwidth ƒBW	Over operating free-air temperature range	min 20 · typ 30 kHz	6
Operate point; see Figure 12 BOP	DRV5033FA; TA = –40°C to 125°C; values are magnitudes, printed with ± for both polarities	min 1.8 · typ 3.5 · max 6.8 mT	6
Release point; see Figure 12 BRP	DRV5033FA; TA = –40°C to 125°C; values are magnitudes, printed with ± for both polarities	min 0.5 · typ 2 · max 4.2 mT	6
Hysteresis; Bhys = (BOP – BRP) Bhys	DRV5033FA; TA = –40°C to 125°C; value is magnitude, printed with ± for both polarities	typ 1.5 mT	6
Magnetic offset; BO = (BOP + BRP) / 2 BO	DRV5033FA; TA = –40°C to 125°C; value is magnitude, printed with ± for both polarities	typ 2.8 mT	6

Pins, by the datasheet

1 VCC: 2.5 to 38 V supply; bypass to GND with a minimum 0.01-uF ceramic capacitor rated for VCC. · p. 4
2 OUT: Hall sensor open-drain output; requires a resistor pullup. · p. 4
3 GND: Ground pin. · p. 4

Ordering codes, by the datasheet

DRV5033FAQDBZR: SOT-23 (DBZ) · FA sensitivity; 3 pins; -40 to 125 °C; 3000-unit large tape and reel; SN lead finish · p. 22
DRV5033FAQDBZR.A: SOT-23 (DBZ) · FA sensitivity; 3 pins; -40 to 125 °C; 3000-unit large tape and reel; SN lead finish · p. 22

Parameters

Current - Supply: 2.7mA
Current - Supply(Max): 3.6mA
Current Limit: 30mA
Features: Current limit protection
Junction Temperature(Max): 150℃
Operating Current: 2.7mA
Operating Temperature: -40℃~+125℃
Operation Points: ±3.5mT
Output Current: 30mA
Output Current per Pin(Max): 30mA
Output Type: Open-drain
Release Points: ±2mT
Rise Time: 31ns
Sample Frequency: 30kHz
Thermal Resistance(Junction to Ambient): 333.2℃/W
Thermal Resistance(Junction to Board): 66.9℃/W
Thermal Resistance(Junction to Case): 99.9℃/W
Type: Omnipolar
Voltage - Supply: 2.5V~38V
Voltage - Supply(Absolute Max): 40V

Order codes

DRV5033FAQDBZRLCSC C2869057

Pinout

The pins of the DRV5033FAQDBZ
Pin	Name	Type
1	VCC	Power in
2	OUT	Output
3	GND	Power in

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/ti/DRV5033FAQDBZ" title="DRV5033FAQDBZ in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/ti/DRV5033FAQDBZ.jpg" alt="DRV5033FAQDBZ" width="1200" height="900">

A picture that opens the part, for a README

[![DRV5033FAQDBZ](https://pcbkit.io/embed/parts/ti/DRV5033FAQDBZ.jpg?size=s)](https://pcbkit.io/parts/ti/DRV5033FAQDBZ)

Questions

Is there a KiCad symbol and footprint for the DRV5033FAQDBZ?

Yes. The symbol is Sensor_Magnetic:DRV5033FAxDBZ and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV5033FAQDBZ?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the DRV5033FAQDBZ datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV5033FAQDBZ?

JLCPCB lists it as part C2869057, with 6,289 in stock; the sellers' links on this page open their listings.

What can replace the DRV5033FAQDBZ?

Parts like it in the library: the CC6103ST by Cross chip, the DRV5013ADQDBZ by Texas Instruments, the HX6286ESO by HUAXIN and the A3144E-JSM by JSMSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

DRV5033FAQDBZ

Overview

Symbol

Footprint

From the datasheet

What it is and has

Around it

Specifications

Pins, by the datasheet

Ordering codes, by the datasheet

Parameters

Order codes

Pinout

Show this part on your page

Questions

Is there a KiCad symbol and footprint for the DRV5033FAQDBZ?

What package is the DRV5033FAQDBZ?

Where is the DRV5033FAQDBZ datasheet?

Where can I order the DRV5033FAQDBZ?

What can replace the DRV5033FAQDBZ?

Parts like it

CC6103ST

DRV5013ADQDBZ

HX6286ESO

A3144E-JSM

A3144

JSM402F

DRV5013AGQDBZ

DRV5023FAQDBZ