Skip to the content
12345678

DRV120PW

Texas InstrumentsExtended

-40℃~+105℃ 1 1.7Ω 260mA 6V~28V Active High Load Switch Under-voltage lockout、Over temperature protection TSSOP-8 Power Distribution Switches ROHS

Part id
ti/DRV120PW
Category
Power Distribution Switches
Package
TSSOP-8
Pins
8
In stock
2 at JLCPCB (C2150137)
Used on
1 open-source board

Overview

The DRV120PW is a power Distribution Switche made by Texas Instruments in a TSSOP-8 package with 8 pins. -40℃~+105℃ 1 1.7Ω 260mA 6V~28V Active High Load Switch Under-voltage lockout、Over temperature protection TSSOP-8 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:DRV120PWR, from EasyEDA) and its footprint (Package_SO:TSSOP-8_4.4x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2 are in stock at JLCPCB (part C2150137). 1 open-source board in 1 repository on GitHub use it.

Symbol

1KEEP2PEAK3OSC4VIN5GND6NC7OUT8EN
EasyEDA_Cloud:DRV120PWRFrom EasyEDA

Footprint

12345678
Package_SO:TSSOP-8_4.4x3mm_P0.65mmFrom KiCad's library

From the datasheet

14
Supply, least
6 V · VIN, recommended operating, min · p. 4
Supply, most
26 V · VIN, recommended operating, max · p. 4
Supply, absolute maximum
28 V · VIN, absolute maximum · p. 3
Works from
-40 °C · operating ambient temperature, min · p. 4
Works up to
105 °C · operating ambient temperature, max · p. 4
Junction, hottest
125 °C · operating virtual junction temperature, absolute maximum · p. 3
Takes working
300 µA · quiescent current, EN = 1, VIN = 14 V, typical · p. 5
Takes at most
400 µA · quiescent current, EN = 1, VIN = 14 V, max · p. 5
Takes asleep
100 µA · standby current, EN = 0, VIN = 14 V, typical · p. 5
Gives
125 mA · average solenoid DC current, single channel, max · p. 4
Switches at
20 kHz · PWM frequency, OSC = GND, typical · p. 5
Junction to air (PW [TSSOP])
183.8 K/W · junction-to-ambient thermal resistance, 8 pins · p. 4
Junction to board (PW [TSSOP])
112.6 K/W · junction-to-board thermal resistance, 8 pins · p. 4
Junction to case (PW [TSSOP])
69.2 K/W · junction-to-case (top) thermal resistance, 8 pins · p. 4

Open-source boards using it

1
  • 2 layers28.7 × 15 mmDrv120 solenoid driver, the printed circuit board in 3D

    Drv120 solenoid driver

    MarkJB/drv120_solenoid_driver_module

    Solenoid driver module that intelligently drives a solenoid via the TI DRV120 chip.

    10 parts9MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DRV120PW?

Yes. The symbol is EasyEDA_Cloud:DRV120PWR and the footprint Package_SO:TSSOP-8_4.4x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV120PW?

TSSOP-8, with 8 pins. Its footprint is drawn on this page.

Where is the DRV120PW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV120PW?

JLCPCB lists it as part C2150137, with 2 in stock; the sellers' links on this page open their listings.

What can replace the DRV120PW?

Parts like it in the library: the TPS2113APW by Texas Instruments, the TPS2412PW by Texas Instruments, the TPS2115AIPWRQ1 by Texas Instruments and the BD82023FVJ-E2 by ROHM Semiconductor. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV120PW?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.