
DP83867IRRGZ
Texas Instruments
Robust, High Immunity 10/100/1000 Ethernet Physical Layer Transceiver
- Part id
- ti/DP83867IRRGZ
- Category
- Uncategorised
- Package
- QFN48
- Pins
- 48
- Used on
- 2 open-source boards
Overview
The DP83867IRRGZ is an uncategorised made by Texas Instruments in a QFN48 package with 49 pins. Robust, High Immunity 10/100/1000 Ethernet Physical Layer Transceiver.
PCBKit's library has its KiCad symbol (Analog & Interface:DP83867IRRGZ, from CERN's library) and its footprint (ICs And Semiconductors SMD:QFN50P700X700X100-49N-S420, from CERN's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
49| Pin | Name | Type |
|---|---|---|
| 1 | TD_P_A | Input/output |
| 2 | TD_M_A | Input/output |
| 3 | VDDA2P5 | Power in |
| 4 | TD_P_B | Input/output |
| 5 | TD_M_B | Input/output |
| 6 | VDD1P0 | Power in |
| 7 | TD_P_C | Input/output |
| 8 | TD_M_C | Input/output |
| 9 | VDDA2P5 | Power in |
| 10 | TD_P_D | Input/output |
| 11 | TD_M_D | Input/output |
| 12 | RBIAS | Passive |
| 13 | VDDA1P8 | Power in |
| 14 | X_O | Output |
| 15 | X_I | Input |
| 16 | MDC | Input |
| 17 | MDIO | Input/output |
| 18 | CLK_OUT | Output |
| 19 | VDDIO | Power in |
| 20 | JTAG_CLK | Input |
| 21 | JTAG_TDO | Output |
| 22 | JTAG_TMS | Input |
| 23 | JTAG_TDI | Input |
| 24 | VDD1P0 | Power in |
| 25 | TX_D3 | Input |
| 26 | TX_D2 | Input |
| 27 | TX_D1 | Input |
| 28 | TX_D0 | Input |
| 29 | GTX_CLK | Input |
| 30 | VDDIO | Power in |
| 31 | VDD1P0 | Power in |
| 32 | RX_CLK | Output |
| 33 | RX_D0 | Output |
| 34 | RX_D1 | Output |
| 35 | RX_D2 | Output |
| 36 | RX_D3 | Output |
| 37 | TX_CTRL | Input |
| 38 | RX_CTRL | Output |
| 39 | GPIO_0 | Output |
| 40 | GPIO_1 | Output |
| 41 | VDDIO | Power in |
| 42 | VDD1P0 | Power in |
| 43 | RESET_N | Input |
| 44 | INT/PWDN | Input/output |
| 45 | LED_2 | Input/output |
| 46 | LED_1 | Input/output |
| 47 | LED_0 | Input/output |
| 48 | VDDA1P8 | Power in |
| 49 | EP_(GND) | Power in |
Open-source boards using it
2- 4 layers120 × 120 mm

- 12 layers150 × 150 mm

HG1-DSP
ajisrawi/hologuard-hg1-radar
HoloGuard HG-1: Ku-band GaN 4D holographic (staring MIMO) counter-UAS radar in an EchoGuard-size envelope - system design, antenna, KiCad boards, FreeCAD enclosure, Blender renders, firmware
77 parts2
Parts like it
4NB3N401SMNTX
QFN483.3 V Quad Channel Half‐Duplex M-LVDS Driver ReceiveronsemiUncategorisedCDCLVD1216RGZ
QFN482:16 Low Additive Jitter LVDS BufferTexas InstrumentsUncategorisedDP83867CSRGZ
QFN48Robust, High Immunity, Small Form Factor 10/100/1000 Ethernet Physical Layer TransceiverTexas InstrumentsUncategorisedDP83869HMRGZ
QFN48High Immunity 10/100/1000 Ethernet Physical Layer Transceiver with Copper and Fiber InterfaceTexas InstrumentsUncategorised
Questions
Is there a KiCad symbol and footprint for the DP83867IRRGZ?
Yes. The symbol is Analog & Interface:DP83867IRRGZ and the footprint ICs And Semiconductors SMD:QFN50P700X700X100-49N-S420, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DP83867IRRGZ?
QFN48, with 49 pins. Its footprint is drawn on this page.
What can replace the DP83867IRRGZ?
Parts like it in the library: the NB3N401SMNTX by onsemi, the CDCLVD1216RGZ by Texas Instruments, the DP83867CSRGZ by Texas Instruments and the DP83869HMRGZ by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the DP83867IRRGZ?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.