
EthernetCNC ver2
pekkaroi/ethernetcnc
This is my project for controlling CNC machine via ethernet port using LinuxCNC. It was originally shortly instroduced at http://pekka.eu/cnc.
Texas InstrumentsExtended
-40℃~+125℃ 1 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s 270mW 3.3V Ethernet Transceiver MII、RMII、SNI LQFP-48(7x7) Ethernet Transceivers ROHS
The DP83848YB is an ethernet Transceiver made by Texas Instruments in a LQFP-48(7x7) package with 49 pins. -40℃~+125℃ 1 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s 270mW 3.3V Ethernet Transceiver MII、RMII、SNI LQFP-48(7x7) Ethernet Transceivers ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:DP83848YBX_NOPB, from EasyEDA) and its footprint (EasyEDA_Cloud:LQFP-48_L7.0-W7.0-P0.50-LS9.0-TL-EP4.2, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C1543903). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | TX_CLK | Unspecified |
| 2 | TX_EN | Unspecified |
| 3 | TXD_0 | Unspecified |
| 4 | TXD_1 | Unspecified |
| 5 | TXD_2 | Unspecified |
| 6 | TXD_3/SNI_MODE | Unspecified |
| 7 | PWR_DOWN/INT | Unspecified |
| 8 | TCK | Unspecified |
| 9 | TDO | Unspecified |
| 10 | TMS | Unspecified |
| 11 | TRST# | Unspecified |
| 12 | TDI | Unspecified |
| 13 | RD- | Unspecified |
| 14 | RD+ | Unspecified |
| 15 | AGND | Unspecified |
| 16 | TD- | Unspecified |
| 17 | TD+ | Unspecified |
| 18 | PFBIN1 | Unspecified |
| 19 | AGND | Unspecified |
| 20 | RESERVED | Unspecified |
| 21 | RESERVED | Unspecified |
| 22 | AVDD33 | Unspecified |
| 23 | PFBOUT | Unspecified |
| 24 | RBIAS | Unspecified |
| 25 | CLK_OUT | Unspecified |
| 26 | LED_ACT/COL/AN_EN | Unspecified |
| 27 | LED_SPEED/AN1 | Unspecified |
| 28 | LED_LINK/AN0 | Unspecified |
| 29 | RESET_N | Unspecified |
| 30 | MDIO | Unspecified |
| 31 | MDC | Unspecified |
| 32 | IOVDD33 | Unspecified |
| 33 | X2 | Unspecified |
| 34 | X1 | Unspecified |
| 35 | IOGND | Unspecified |
| 36 | DGND | Unspecified |
| 37 | PFBIN2 | Unspecified |
| 38 | RX_CLK | Unspecified |
| 39 | RX_DV/MII_MODE | Unspecified |
| 40 | CRS/CRS_DV/LED_CFG | Unspecified |
| 41 | RX_ER/MDIX_EN | Unspecified |
| 42 | COL/PHYAD0 | Unspecified |
| 43 | RXD_0/PHYAD1 | Unspecified |
| 44 | RXD_1/PHYAD2 | Unspecified |
| 45 | RXD_2/PHYAD3 | Unspecified |
| 46 | RXD_3/PHYAD4 | Unspecified |
| 47 | IOGND | Unspecified |
| 48 | IOVDD33 | Unspecified |
| 49 | GNDPAD | Unspecified |

pekkaroi/ethernetcnc
This is my project for controlling CNC machine via ethernet port using LinuxCNC. It was originally shortly instroduced at http://pekka.eu/cnc.
Yes. The symbol is EasyEDA_Cloud:DP83848YBX_NOPB and the footprint EasyEDA_Cloud:LQFP-48_L7.0-W7.0-P0.50-LS9.0-TL-EP4.2, both drawn on this page. PCBKit places them on a board for you when you design with it.
LQFP-48(7x7), with 49 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C1543903, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the DP83848VYB by Texas Instruments and the DP83848MPHPEP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.