DAC11001APFB
Texas Instruments
20 Bit, Low-Noise, Ultra-Low Harmonic Distortion, FastSettling, High-Voltage Output, Digital-to-Analog Converter
- Part id
- ti/DAC11001APFB
- Category
- Uncategorised
- Package
- QFP48
- Pins
- 48
Overview
The DAC11001APFB is an uncategorised made by Texas Instruments in a QFP48 package with 48 pins. 20 Bit, Low-Noise, Ultra-Low Harmonic Distortion, FastSettling, High-Voltage Output, Digital-to-Analog Converter.
PCBKit's library has its KiCad symbol (Analog & Interface:DAC11001APFB, from CERN's library) and its footprint (ICs And Semiconductors SMD:QFP50P900X900X120-48N, from CERN's library), ready for a KiCad board.
Symbol
Footprint
Pinout
48| Pin | Name | Type |
|---|---|---|
| 1 | NC | Passive |
| 2 | AGND | Power in |
| 3 | REFPF | Input |
| 4 | REFPS | Input |
| 5 | REFNF | Input |
| 6 | REFNS | Input |
| 7 | OUT | Output |
| 8 | AGND-OUT | Power in |
| 9 | RFB | Input |
| 10 | ROFS | Input |
| 11 | RCM | Input |
| 12 | NC | Passive |
| 13 | NC | Passive |
| 14 | AGND-TnH | Power in |
| 15 | NC | Passive |
| 16 | DGND | Power in |
| 17 | DGND | Power in |
| 18 | LDAC | Input |
| 19 | ALARM | Output |
| 20 | DGND | Power in |
| 21 | DGND | Power in |
| 22 | DGND | Power in |
| 23 | DGND | Power in |
| 24 | NC | Passive |
| 25 | NC | Passive |
| 26 | DGND | Power in |
| 27 | DVDD | Power in |
| 28 | IOVDD | Power in |
| 29 | NC | Passive |
| 30 | CLR | Input |
| 31 | SCLK | Input |
| 32 | SDIN | Input |
| 33 | SYNC | Input |
| 34 | SDO | Output |
| 35 | AGND | Power in |
| 36 | NC | Passive |
| 37 | NC | Passive |
| 38 | AGND | Power in |
| 39 | AVDD | Power in |
| 40 | AGND | Power in |
| 41 | AVDD | Power in |
| 42 | AGND | Power in |
| 43 | AGND | Power in |
| 44 | VSS | Power in |
| 45 | VCC | Power in |
| 46 | AGND | Power in |
| 47 | AGND | Power in |
| 48 | NC | Passive |
Parts like it
2AT32UC3L016-AU
QFP4816Kb Flash/8Kb SRAM, High-performance, Low-power 32-bit Atmel® AVR® MicrocontrollerMicrochip TechnologyUncategorisedATSAML21G18B-AN
QFP4832-bit ARM®-based Cortex®-M0+ core Microcontroller, 1.62V to 3.6V, 48MHz, 256KB Flash, 32KB SRAM, 48 QFP, Temperature Range -40°C to 105°CMicrochip TechnologyUncategorised
Questions
Is there a KiCad symbol and footprint for the DAC11001APFB?
Yes. The symbol is Analog & Interface:DAC11001APFB and the footprint ICs And Semiconductors SMD:QFP50P900X900X120-48N, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DAC11001APFB?
QFP48, with 48 pins. Its footprint is drawn on this page.
What can replace the DAC11001APFB?
Parts like it in the library: the AT32UC3L016-AU by Microchip Technology and the ATSAML21G18B-AN by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.