Skip to the content
1223

CSD19536KTT

Texas InstrumentsExtended

-55℃~+175℃ 1 N-channel 100V 12nF 153nC@10V 2.2mΩ@6V 2.37nF 200A 3.2V 375W 61pF N-Channel TO-263-3 MOSFETs ROHS

Part id
ti/CSD19536KTT
Category
MOSFETs
Package
TO-263-3
Pins
3
In stock
86 at JLCPCB (C2687963)
Used on
5 open-source boards

Overview

The CSD19536KTT is a MOSFET made by Texas Instruments in a TO-263-3 package with 3 pins. -55℃~+175℃ 1 N-channel 100V 12nF 153nC@10V 2.2mΩ@6V 2.37nF 200A 3.2V 375W 61pF N-Channel TO-263-3 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2D_3S, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:TO-263-3_TabPin2, from KiCad's library), ready for a KiCad board. 86 are in stock at JLCPCB (part C2687963). 5 open-source boards in 3 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2D_3SFrom PCBKit's generic symbols

Footprint

1223
Package_TO_SOT_SMD:TO-263-3_TabPin2From KiCad's library

Pinout

3
The pins of the CSD19536KTT
PinNameType
1GInput
2DPassive
3SPassive

Open-source boards using it

5
  • 4 layers130 × 90 mmPhase2-module, the printed circuit board in 3D

    Phase2-module

    udaravima/Lab_Bench

    A modular, rack-style DC power supply: up to 8 hot-pluggable 600 W buck modules on a shared DC input bus, coordinated by a central manager over CAN.

    180 parts1GPL-3.0
  • 6 layers149 × 39 mmNegative startup physical, the printed circuit board in 3D

    Negative startup physical

    AxelMcKenna/AFX-1000

    RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

    267 parts1
  • 4 layers149 × 39 mmNegative startup ready, the printed circuit board in 3D

    Negative startup ready

    AxelMcKenna/AFX-1000

    RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

    233 parts1
  • 4 layers56 × 61 mmProtection, the printed circuit board in 3D

    Protection

    Tim4769/Microver

    Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

    39 parts
  • 4 layers56 × 61 mmProtection, the printed circuit board in 3D

    Protection

    Tim4769/Microver

    Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

    40 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the CSD19536KTT?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2D_3S and the footprint Package_TO_SOT_SMD:TO-263-3_TabPin2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the CSD19536KTT?

TO-263-3, with 3 pins. Its footprint is drawn on this page.

Where is the CSD19536KTT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the CSD19536KTT?

JLCPCB lists it as part C2687963, with 86 in stock; the sellers' links on this page open their listings.

What can replace the CSD19536KTT?

Parts like it in the library: the IPB0401NM5S by Infineon Technologies, the IPB020N10N5LFATMA1 by Infineon Technologies, the AUIRF6218S-IR by Infineon Technologies and the IPB015N04LGATMA1 by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CSD19536KTT?

5 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.