
CSD17311Q5
Texas InstrumentsExtended
-55℃~+150℃ 1 N-channel 1.6V 100A 110pF 2.26nF 3.1mΩ@3V 3.2W 30V 31nC@4.5V 4.28nF N-Channel VSON-8-EP(5x6) MOSFETs ROHS
- Part id
- ti/CSD17311Q5
- Category
- MOSFETs
- Package
- VSON-8-EP(5x6)
- Pins
- 9
- In stock
- 72 at JLCPCB (C139640)
- Used on
- 4 open-source boards
Overview
The CSD17311Q5 is a MOSFET made by Texas Instruments in a VSON-8-EP(5x6) package with 5 pins. -55℃~+150℃ 1 N-channel 1.6V 100A 110pF 2.26nF 3.1mΩ@3V 3.2W 30V 31nC@4.5V 4.28nF N-Channel VSON-8-EP(5x6) MOSFETs ROHS.
PCBKit's library has its KiCad symbol (Transistor_FET:CSD17311Q5, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TDSON-8-1, from KiCad's library), ready for a KiCad board. 72 are in stock at JLCPCB (part C139640). 4 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
11- Drain-source, most
- 30 V · Drain to Source Voltage, absolute max · p. 1
- Gate-source, most
- 10 V · Gate to Source Voltage, positive absolute max; negative limit −8 V · p. 1
- Drain current, most
- 100 A · Continuous Drain Current, max at TC = 25°C · p. 1
- Junction, hottest
- 150 °C · Operating junction temperature, max · p. 1
- On resistance
- 2.3 mΩ · VGS = 3V, ID = 30A, typical · p. 2
- On resistance
- 1.8 mΩ · VGS = 4.5V, ID = 30A, typical · p. 2
- On resistance
- 1.6 mΩ · VGS = 8V, ID = 30A, typical · p. 2
- Gate threshold
- 1.2 V · Gate to Source Threshold Voltage, VDS = VGS, ID = 250mA, typical · p. 2
- Edge
- 12 ns · Fall Time, VDS = 15V, VGS = 4.5V, IDS = 30A, RG = 2Ω, typical · p. 2
- Junction to case (SON 5-mm × 6-mm Plastic Package)
- 1 K/W · Thermal Resistance Junction to Case, max · p. 2
- Junction to air (SON 5-mm × 6-mm Plastic Package)
- 49 K/W · Thermal Resistance Junction to Ambient, max, 1-inch² 2-oz. copper on FR4 · p. 2
What it is and has
5- Gate drive
- Optimized for 5V gate drive · p. 1
- Avalanche rating
- Avalanche rated · p. 1
- Terminal plating
- Pb free · p. 1
- Halogen content
- Halogen free · p. 1
- Package
- SON 5-mm × 6-mm Plastic Package · p. 1
Specifications
34| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Drain to Source Voltage VDS | TA = 25°C unless otherwise stated | max 30 V | 1 |
| Gate to Source Voltage VGS | TA = 25°C unless otherwise stated | min -8 · max 10 V | 1 |
| Continuous Drain Current ID | TC = 25°C | max 100 A | 1 |
| Continuous Drain Current(1) ID | TA = 25°C; footnote (1): typical RqJA = 40°C/W on specified PCB | max 32 A | 1 |
| Pulsed Drain Current IDM | TA = 25°C; pulse duration ≤300ms, duty cycle ≤2% | max 200 A | 1 |
| Power Dissipation(1) PD | TA = 25°C; footnote (1): typical RqJA = 40°C/W on specified PCB | max 3.2 W | 1 |
| Operating Junction and Storage Temperature Range TJ, TSTG | min -55 · max 150 °C | 1 | |
| Avalanche Energy, Single Pulse EAS | ID = 113A, L = 0.1mH, RG = 25Ω | max 638 mJ | 1 |
| Drain to Source Voltage BVDSS | TA = 25°C; VGS = 0V, ID = 250mA | min 30 V | 2 |
| Drain to Source Leakage Current IDSS | TA = 25°C; VGS = 0V, VDS = 24V | max 1 mA | 2 |
| Gate to Source Leakage Current IGSS | TA = 25°C; VDS = 0V, VGS = +10/–8V | max 100 nA | 2 |
| Gate to Source Threshold Voltage VGS(th) | TA = 25°C; VDS = VGS, ID = 250mA | min 0.9 · typ 1.2 · max 1.6 V | 2 |
| Drain to Source On Resistance RDS(on) | TA = 25°C; VGS = 3V, ID = 30A | typ 2.3 · max 3.1 mΩ | 2 |
| Drain to Source On Resistance RDS(on) | TA = 25°C; VGS = 4.5V, ID = 30A | typ 1.8 · max 2.3 mΩ | 2 |
| Drain to Source On Resistance RDS(on) | TA = 25°C; VGS = 8V, ID = 30A | typ 1.6 · max 2 mΩ | 2 |
| Transconductance gfs | TA = 25°C; VDS = 15V, ID = 30A | typ 200 S | 2 |
| Input Capacitance Ciss | TA = 25°C; VGS = 0V, VDS = 15V, f = 1MHz | typ 3290 · max 4280 pF | 2 |
| Output Capacitance Coss | TA = 25°C; VGS = 0V, VDS = 15V, f = 1MHz | typ 1740 · max 2260 pF | 2 |
| Reverse Transfer Capacitance Crss | TA = 25°C; VGS = 0V, VDS = 15V, f = 1MHz | typ 85 · max 110 pF | 2 |
| Series Gate Resistance RG | TA = 25°C | typ 1.2 · max 2.4 Ω | 2 |
| Gate Charge Total (4.5V) Qg | TA = 25°C; VDS = 15V, IDS = 30A | typ 24 · max 31 nC | 2 |
| Gate Charge Gate to Drain Qgd | TA = 25°C; VDS = 15V, IDS = 30A | typ 5.2 nC | 2 |
| Gate Charge Gate to Source Qgs | TA = 25°C; VDS = 15V, IDS = 30A | typ 6.6 nC | 2 |
| Gate Charge at Vth Qg(th) | TA = 25°C; VDS = 15V, IDS = 30A | typ 3.9 nC | 2 |
| Output Charge Qoss | TA = 25°C; VDS = 14.8V, VGS = 0V | typ 47 nC | 2 |
| Turn On Delay Time td(on) | TA = 25°C; VDS = 15V, VGS = 4.5V, IDS = 30A, RG = 2Ω | typ 12 ns | 2 |
| Rise Time tr | TA = 25°C; VDS = 15V, VGS = 4.5V, IDS = 30A, RG = 2Ω | typ 18 ns | 2 |
| Turn Off Delay Time td(off) | TA = 25°C; VDS = 15V, VGS = 4.5V, IDS = 30A, RG = 2Ω | typ 33 ns | 2 |
| Fall Time tf | TA = 25°C; VDS = 15V, VGS = 4.5V, IDS = 30A, RG = 2Ω | typ 12 ns | 2 |
| Diode Forward Voltage VSD | TA = 25°C; ISD = 30A, VGS = 0V | typ 0.85 · max 1 V | 2 |
| Reverse Recovery Charge Qrr | TA = 25°C; VDD = 14.8V, IF = 30A, di/dt = 300A/ms | typ 74 nC | 2 |
| Reverse Recovery Time trr | TA = 25°C; VDD = 14.8V, IF = 30A, di/dt = 300A/ms | typ 39 ns | 2 |
| Thermal Resistance Junction to Case (1) RqJC | TA = 25°C; SON 5-mm × 6-mm Plastic Package; footnote (1) mounting conditions | max 1 °C/W | 2 |
| Thermal Resistance Junction to Ambient (1) (2) RqJA | TA = 25°C; SON 5-mm × 6-mm Plastic Package; FR4 material with 1-inch2 (6.45-cm2), 2-oz. (0.071-mm thick) Cu | max 49 °C/W | 2 |
Pins, by the datasheet
8- 1 S
- Source. · p. 1
- 2 S
- Source. · p. 1
- 3 S
- Source. · p. 1
- 4 G
- Gate. · p. 1
- 5 D
- Drain. · p. 1
- 6 D
- Drain. · p. 1
- 7 D
- Drain. · p. 1
- 8 D
- Drain. · p. 1
Ordering codes, by the datasheet
2- CSD17311Q5
- VSON-CLIP (DQH) | 8 · 2500 | LARGE T&R; -55 to 150°C; SN lead finish · p. 9
- CSD17311Q5.B
- VSON-CLIP (DQH) | 8 · 2500 | LARGE T&R; -55 to 150°C; SN lead finish; no difference specified · p. 9
Open-source boards using it
4- 4 layers65 × 56.5 mm

- 4 layers56.5 × 99.8 mm

BitaxeMax
bitaxeorg/bitaxeMax
bitaxe based on the BM1397 ASIC from the Antminer S17
153 parts17CERN-OHL-S-2.0 - 2 layers31.3 × 48.4 mm

- 4 layers56.5 × 99.8 mm

My custom miner
PrinceYadav78/My_custom_miner
Mines crypto runs python pck bitaxetool to use this
135 partsMIT
Parts like it
8BSC040N10NS5
TDSON-8-EP(5.1x5.9)-55℃~+150℃ 1 N-channel 100V 139W 3.8V 49pF 4mΩ@10V 5.3nF 72nC@10V 86A TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsBSC030N08NS5
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 100A 139W 3.8V 3mΩ@10V 5.6nF 56pF 76nC@10V 80V TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsBSC057N08NS3G
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 100A 114W 1nF 3.5V 3.9nF 30pF 5.7mΩ@10V 56nC@10V 80V TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsBSC030N08NS5(ES)
PDFN-8L(5x6)-55℃~+150℃ 1 N-channel 1.536nF 100V 138A 139W 19pF 2.7V 3.658nF 3mΩ@10V 49nC@10V N-Channel PDFN-8L(5x6) MOSFETs ROHSElecSuperMOSFETsCSD18540Q5B(ES)
PDFN-8L(5x6)MOSFETsElecSuperBSC035N10NS5
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 100A 100V 156W 1nF 3.5mΩ@10V 3.8V 6.5nF 60pF 87nC@10V N-Channel TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsCSD19532Q5B
SON-8(5x6)-55℃~+150℃ 1 N-channel 100A 100V 18pF 195W 2.6V 4.6mΩ@6V 4.81nF 48nC@10V 706pF N-Channel SON-8(5x6) MOSFETs ROHSTexas InstrumentsMOSFETsBSC040N08NS5
TDSON-8-55℃~+150℃ 1 N-channel 100A 104W 3.8V 3.9nF 42pF 43nC@10V 4mΩ@10V 80V TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETs
Questions
Is there a KiCad symbol and footprint for the CSD17311Q5?
Yes. The symbol is Transistor_FET:CSD17311Q5 and the footprint Package_TO_SOT_SMD:TDSON-8-1, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CSD17311Q5?
VSON-8-EP(5x6), with 5 pins. Its footprint is drawn on this page.
Where is the CSD17311Q5 datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the CSD17311Q5?
JLCPCB lists it as part C139640, with 72 in stock; the sellers' links on this page open their listings.
What can replace the CSD17311Q5?
Parts like it in the library: the BSC040N10NS5 by Infineon Technologies, the BSC030N08NS5 by Infineon Technologies, the BSC057N08NS3G by Infineon Technologies and the BSC030N08NS5(ES) by ElecSuper. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the CSD17311Q5?
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.