CDCVF2505DW
Texas Instruments
3.3V Clock Phase-Lock Loop Clock Driver
- Part id
- ti/CDCVF2505DW
- Category
- Uncategorised
- Package
- TSSOP8
- Pins
- 8
Overview
The CDCVF2505DW is an uncategorised made by Texas Instruments in a TSSOP8 package with 8 pins. 3.3V Clock Phase-Lock Loop Clock Driver.
PCBKit's library has its KiCad symbol (Timer_PLL:CDCVF2505, from KiCad's library) and its footprint (Package_SO:TSSOP-8_4.4x3mm_P0.65mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | CLKIN | Input |
| 2 | 1Y1 | Tri-state |
| 3 | 1Y0 | Tri-state |
| 4 | GND | Power in |
| 5 | 1Y2 | Tri-state |
| 6 | VDD | Power in |
| 7 | 1Y3 | Tri-state |
| 8 | CLKOUT | Tri-state |
Parts like it
8LTC726XT8/R8
TSSOP-8LUncategorisedLinearinAO8814-TP
TSSOP-8UncategorisedTECH PUBLICTPM8205AET8
TSSOP-8UncategorisedTECH PUBLICSD8190
TSSOP-8UncategorisedWAVEFDW9926NZ-TP
TSSOP-8UncategorisedTECH PUBLICBAA-I8T1U7
TSSOP8Battery Protection IC for 2-Serial-Cell PackABLICUncategorisedS-8209ACA-T8T1U
TSSOP8Battery Protection IC with Cell-Balance Function (Overcharge Detection Voltage 4.350V)ABLICUncategorisedAD7683BRM
TSSOP816-Bit, 100 kSPS, Single-Ended, PulSAR ADCAnalog DevicesUncategorised
Questions
Is there a KiCad symbol and footprint for the CDCVF2505DW?
Yes. The symbol is Timer_PLL:CDCVF2505 and the footprint Package_SO:TSSOP-8_4.4x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CDCVF2505DW?
TSSOP8, with 8 pins. Its footprint is drawn on this page.
What can replace the CDCVF2505DW?
Parts like it in the library: the LTC726XT8/R8 by Linearin, the AO8814-TP by TECH PUBLIC, the TPM8205AET8 by TECH PUBLIC and the SD8190 by WAVE. Check their datasheets: a part that fits the footprint may still differ in its ratings.