CDCLVP1102RGT
Texas Instruments
Two-LVPECL Output, High-Performance Clock Buffer
- Part id
- ti/CDCLVP1102RGT
- Category
- Uncategorised
- Package
- QFN16
- Pins
- 17
Overview
The CDCLVP1102RGT is an uncategorised made by Texas Instruments in a QFN16 package with 17 pins. Two-LVPECL Output, High-Performance Clock Buffer.
PCBKit's library has its KiCad symbol (Interface:CDCLVP1102RGT, from KiCad's library) and its footprint (Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
17| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | NC | Not connected |
| 3 | NC | Not connected |
| 4 | NC | Not connected |
| 5 | VCC | Power in |
| 6 | INP | Input |
| 7 | INN | Input |
| 8 | VAC_REF | Output |
| 9 | OUTP0 | Output |
| 10 | OUTN0 | Output |
| 11 | OUTP1 | Output |
| 12 | OUTN1 | Output |
| 13 | NC | Not connected |
| 14 | NC | Not connected |
| 15 | NC | Not connected |
| 16 | GND | Passive |
| 17 | GND | Passive |
Parts like it
1Questions
Is there a KiCad symbol and footprint for the CDCLVP1102RGT?
Yes. The symbol is Interface:CDCLVP1102RGT and the footprint Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CDCLVP1102RGT?
QFN16, with 17 pins. Its footprint is drawn on this page.
What can replace the CDCLVP1102RGT?
Parts like it in the library: the ADL5904ACPZN by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.