
CD74HCT393E
Texas InstrumentsExtended
-55℃~+125℃ 2 27MHz 32ns@4.5V,50pF 4 4.5V~5.5V 74HCT Asynchronous Divide-by-2 Falling Edge Reset function、Static operation Up Counter PDIP-14 Counters, Dividers ROHS
- Part id
- ti/CD74HCT393E
- Category
- Counters, Dividers
- Package
- PDIP-14
- Pins
- 2
- In stock
- 0 at JLCPCB (C1523312)
- Used on
- 2 open-source boards
Overview
The CD74HCT393E is a counters, Divider made by Texas Instruments in a PDIP-14 package with 14 pins. -55℃~+125℃ 2 27MHz 32ns@4.5V,50pF 4 4.5V~5.5V 74HCT Asynchronous Divide-by-2 Falling Edge Reset function、Static operation Up Counter PDIP-14 Counters, Dividers ROHS.
PCBKit's library has its KiCad symbol (74xx:74LS393, from KiCad's library) and its footprint (Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1523312). 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
9- Supply, least
- 4.5 V · VCC, recommended operating min, HCT types · p. 4
- Supply, most
- 5.5 V · VCC, recommended operating max, HCT types · p. 4
- Supply, absolute maximum
- 7 V · VCC, absolute maximum · p. 4
- Works from
- -55 °C · TA, operating ambient min · p. 4
- Works up to
- 125 °C · TA, operating ambient max · p. 4
- Junction, hottest
- 150 °C · TJ, absolute maximum · p. 4
- A pin gives at most
- 25 mA · Output source or sink current per pin, absolute max magnitude · p. 4
- Takes working
- 160 µA · VCC supply current max, inputs at VCC or GND, VCC = 5.5 V, −55°C to 125°C · p. 5
- Junction to air (N (PDIP))
- 80 K/W · Junction-to-ambient thermal resistance · p. 4
What it is and has
5- Operation
- Fully static · p. 1
- Inputs
- Buffered · p. 1
- Reset
- Master reset · p. 1
- Clock
- Negative edge · p. 1
- Package
- PDIP (14), 19.31mm × 6.35mm nominal · p. 1
Around it
2- cap 0.1-μF
- between VCC and GND; Bypass capacitor at each VCC terminal, installed as close to the power terminal as possible. · p. 11
- cap 1-μF
- between VCC and GND; Commonly used in parallel with the 0.1-uF bypass capacitor to reject different noise frequencies. · p. 11
Specifications
80| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | min -0.5 · max 7 V | 4 | |
| Input diode current IIK | For VI < –0.5 V or VI > VCC + 0.5 V | max 20 mA | 4 |
| Output diode current IOK | For VO < –0.5 V or VO > VCC + 0.5 V; ±20 mA | max 20 mA | 4 |
| Output source or sink current per output pin IO | For VO> –0.5 V or VO < VCC + 0.5 V; ±25 mA | max 25 mA | 4 |
| Continous current through VCC or GND | ±50 mA | max 50 mA | 4 |
| Junction temperature TJ | max 150 °C | 4 | |
| Storage temperature range Tstg | min -65 · max 150 °C | 4 | |
| Supply voltage range VCC | HCT types | min 4.5 · max 5.5 V | 4 |
| DC input or output voltage VI, VO | Upper limit VCC | min 0 V | 4 |
| Input rise and fall time | VCC = 2 V | max 1000 ns | 4 |
| Input rise and fall time | VCC = 4.5 V | max 500 ns | 4 |
| Input rise and fall time | VCC = 6 V | max 400 ns | 4 |
| Temperature range TA | min -55 · max 125 ℃ | 4 | |
| Junction-to-ambient thermal resistance RθJA | N (PDIP), 14 PINS; table gives a single value | typ 80 °C/W | 4 |
| High level input voltage VIH | HCT types; VCC = 4.5 to 5.5 V; 25℃ | min 2 V | 5 |
| High level input voltage VIH | HCT types; VCC = 4.5 to 5.5 V; -40℃ to 85℃ | min 2 V | 5 |
| High level input voltage VIH | HCT types; VCC = 4.5 to 5.5 V; -55℃ to 125℃ | min 2 V | 5 |
| Low level input voltage VIL | HCT types; VCC = 4.5 to 5.5 V; 25℃ | max 0.8 V | 5 |
| Low level input voltage VIL | HCT types; VCC = 4.5 to 5.5 V; -40℃ to 85℃ | max 0.8 V | 5 |
| Low level input voltage VIL | HCT types; VCC = 4.5 to 5.5 V; -55℃ to 125℃ | max 0.8 V | 5 |
| High level output voltage CMOS loads VOH | HCT types; IOH = – 20 uA; VCC = 4.5 V; 25℃ | min 4.4 V | 5 |
| High level output voltage CMOS loads VOH | HCT types; IOH = – 20 uA; VCC = 4.5 V; -40℃ to 85℃ | min 4.4 V | 5 |
| High level output voltage CMOS loads VOH | HCT types; IOH = – 20 uA; VCC = 4.5 V; -55℃ to 125℃ | min 4.4 V | 5 |
| High level output voltage TTL loads VOH | HCT types; IOH = – 4 mA; VCC = 4.5 V; 25℃ | min 3.98 V | 5 |
| High level output voltage TTL loads VOH | HCT types; IOH = – 4 mA; VCC = 4.5 V; -40℃ to 85℃ | min 3.84 V | 5 |
| High level output voltage TTL loads VOH | HCT types; IOH = – 4 mA; VCC = 4.5 V; -55℃ to 125℃ | min 3.7 V | 5 |
| Low level output voltage CMOS loads VOL | HCT types; IOL = 20 uA; VCC = 4.5 V; 25℃ | max 0.1 V | 5 |
| Low level output voltage CMOS loads VOL | HCT types; IOL = 20 uA; VCC = 4.5 V; -40℃ to 85℃ | max 0.1 V | 5 |
| Low level output voltage CMOS loads VOL | HCT types; IOL = 20 uA; VCC = 4.5 V; -55℃ to 125℃ | max 0.1 V | 5 |
| Low level output voltage TTL loads VOL | HCT types; IOL = 4 mA; VCC = 4.5 V; 25℃ | max 0.26 V | 5 |
| Low level output voltage TTL loads VOL | HCT types; IOL = 4 mA; VCC = 4.5 V; -40℃ to 85℃ | max 0.33 V | 5 |
| Low level output voltage TTL loads VOL | HCT types; IOL = 4 mA; VCC = 4.5 V; -55℃ to 125℃ | max 0.4 V | 5 |
| Input leakage current II | HCT types; VCC and GND; VCC = 5.5 V; 25℃; ±0.1 uA | max 0.1 uA | 5 |
| Input leakage current II | HCT types; VCC and GND; VCC = 5.5 V; -40℃ to 85℃; ±1 uA | max 1 uA | 5 |
| Input leakage current II | HCT types; VCC and GND; VCC = 5.5 V; -55℃ to 125℃; ±1 uA | max 1 uA | 5 |
| Supply current ICC | HCT types; VCC or GND; VCC = 5.5 V; 25℃ | max 8 uA | 5 |
| Supply current ICC | HCT types; VCC or GND; VCC = 5.5 V; -40℃ to 85℃ | max 80 uA | 5 |
| Supply current ICC | HCT types; VCC or GND; VCC = 5.5 V; -55℃ to 125℃ | max 160 uA | 5 |
| Additional supply current per input pin ΔICC | HCT types; nCP input held at VCC -2.1; VCC = 4.5 to 5.5 V; 25℃ | typ 100 · max 144 uA | 5 |
| Additional supply current per input pin ΔICC | HCT types; nCP input held at VCC -2.1; VCC = 4.5 to 5.5 V; -40℃ to 85℃ | max 180 uA | 5 |
| Additional supply current per input pin ΔICC | HCT types; nCP input held at VCC -2.1; VCC = 4.5 to 5.5 V; -55℃ to 125℃ | max 196 uA | 5 |
| Additional supply current per input pin ΔICC | HCT types; nMR input held at VCC – 2.1; VCC = 4.5 to 5.5 V; 25℃ | typ 100 · max 360 uA | 5 |
| Additional supply current per input pin ΔICC | HCT types; nMR input held at VCC – 2.1; VCC = 4.5 to 5.5 V; -40℃ to 85℃ | max 450 uA | 5 |
| Additional supply current per input pin ΔICC | HCT types; nMR input held at VCC – 2.1; VCC = 4.5 to 5.5 V; -55℃ to 125℃ | max 490 uA | 5 |
| Maximum clock frequency fMAX | HCT types; VCC = 4.5 V; 25℃ | min 27 MHz | 6 |
| Maximum clock frequency fMAX | HCT types; VCC = 4.5 V; -40℃ to 85℃ | min 22 MHz | 6 |
| Maximum clock frequency fMAX | HCT types; VCC = 4.5 V; -55℃ to 125℃ | min 18 MHz | 6 |
| Clock pulse width tW | HCT types; VCC = 4.5 V; 25℃ | min 19 ns | 6 |
| Clock pulse width tW | HCT types; VCC = 4.5 V; -40℃ to 85℃ | min 24 ns | 6 |
| Clock pulse width tW | HCT types; VCC = 4.5 V; -55℃ to 125℃ | min 29 ns | 6 |
| Reset recovery time tREC | HCT types; VCC = 4.5 V; 25℃ | min 5 ns | 6 |
| Reset recovery time tREC | HCT types; VCC = 4.5 V; -40℃ to 85℃ | min 5 ns | 6 |
| Reset recovery time tREC | HCT types; VCC = 4.5 V; -55℃ to 125℃ | min 5 ns | 6 |
| Reset pulse width tW | HCT types; VCC = 4.5 V; 25℃ | min 16 ns | 6 |
| Reset pulse width tW | HCT types; VCC = 4.5 V; -40℃ to 85℃ | min 20 ns | 6 |
| Reset pulse width tW | HCT types; VCC = 4.5 V; -55℃ to 125℃ | min 24 ns | 6 |
| Propagation delay time nCP to nQ0 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; 25℃ | max 32 ns | 7 |
| Propagation delay time nCP to nQ0 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -40℃ to 85℃ | max 40 ns | 7 |
| Propagation delay time nCP to nQ0 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -55℃ to 125℃ | max 48 ns | 7 |
| Propagation delay time nCP to nQ0 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 15 pF; VCC = 5 V; 25℃ | typ 13 ns | 7 |
| nCP to nQ1 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; 25℃ | max 44 ns | 7 |
| nCP to nQ1 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -40℃ to 85℃ | max 55 ns | 7 |
| nCP to nQ1 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -55℃ to 125℃ | max 66 ns | 7 |
| nCP to nQ2 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; 25℃ | max 50 ns | 7 |
| nCP to nQ2 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -40℃ to 85℃ | max 63 ns | 7 |
| nCP to nQ2 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -55℃ to 125℃ | max 75 ns | 7 |
| nCP to nQ3 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; 25℃ | max 62 ns | 7 |
| nCP to nQ3 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -40℃ to 85℃ | max 78 ns | 7 |
| nCP to nQ3 tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -55℃ to 125℃ | max 93 ns | 7 |
| MR to Qn tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; 25℃ | max 32 ns | 7 |
| MR to Qn tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -40℃ to 85℃ | max 40 ns | 7 |
| MR to Qn tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -55℃ to 125℃ | max 48 ns | 7 |
| MR to Qn tPLH, tPHL | HCT types; Input tr, tf = 6 ns; CL = 15 pF; VCC = 5 V; 25℃ | typ 13 ns | 7 |
| Output transition tTLH, tTHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; 25℃ | max 15 ns | 7 |
| Output transition tTLH, tTHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -40℃ to 85℃ | max 19 ns | 7 |
| Output transition tTLH, tTHL | HCT types; Input tr, tf = 6 ns; CL = 50 pF; VCC = 4.5 V; -55℃ to 125℃ | max 22 ns | 7 |
| Input capacitance CIN | HCT types; CL = 15 pF; 25℃ | max 10 pF | 7 |
| Input capacitance CIN | HCT types; CL = 15 pF; -40℃ to 85℃ | max 10 pF | 7 |
| Input capacitance CIN | HCT types; CL = 15 pF; -55℃ to 125℃ | max 10 pF | 7 |
| Power dissipation capacitance CPD | HCT types; CL = 15 pF; VCC = 5 V; 25℃; per stage | typ 21 pF | 7 |
Ordering codes, by the datasheet
1- CD74HCT393E
- PDIP · 14 pins; package drawing N; package quantity 25; operating temperature -55 to 125 °C · p. 13
Open-source boards using it
2- 4 layers100 × 50 mm

- 2 layers160 × 100 mm

ACE2NOKBV2MK2
flypie/Ace-2019
Reimplimentation of the Jupiter ACE with slightly more modern hardware. https://www.jupiter-ace.co.uk/ the KiCad versions are the up to date designs which are available at https://jupiterdeuce.blogspot.com and…
114 parts13GPL-3.0
Parts like it
8SN74LS90N
DIP-140℃~+70℃ 1 16ns 4 4.75V~5.25V 42MHz 45mW Asynchronous Asynchronous Divide-by-10 Falling Edge Up Counter DIP-14 Counters, Dividers ROHSTexas InstrumentsCounters, DividersSN74HC393N(LX)
DIP-14-40℃~+125℃ 12ns 2 28MHz 2V~6V 4 Asynchronous Divide-by-2 Falling Edge DIP-14 Counters, Dividers ROHSlingxingicCounters, DividersSN74HC90N(LX)
DIP-14-40℃~+125℃ 1 2V~6V 32MHz 50ns Asynchronous Divide-by-10 Falling Edge Up Counter DIP-14 Counters, Dividers ROHSlingxingicCounters, DividersSN74LS393N(LX)
DIP-14-40℃~+125℃ 12ns 2 28MHz 2V~6V 4 Asynchronous Divide-by-2 Falling Edge Reset function DIP-14 Counters, Dividers ROHSlingxingicCounters, DividersXD74LS90
DIP-140℃~+70℃ 16ns 32MHz 4.75V~5.25V BCD Counter DIP-14 Counters, Dividers ROHSXINLUDACounters, DividersXD74LS93
DIP-140℃~+70℃ 16ns 32MHz 4 4 4.75V~5.25V Binary Counter DIP-14 Counters, Dividers ROHSXINLUDACounters, DividersCD4024BE(LX)
DIP-14-40℃~+125℃ 1 25ns 35MHz 3V~15V 7 Asynchronous Asynchronous Divide-by-2 Falling Edge DIP-14 Counters, Dividers ROHSlingxingicCounters, DividersCD74HCT4024E
PDIP-14-55℃~+125℃ 1 25MHz 4.5V~5.5V 40ns 74HCT Asynchronous Divide-by-2 Falling Edge Reset function、Static operation Up Counter PDIP-14 Counters, Dividers ROHSTexas InstrumentsCounters, Dividers
Questions
Is there a KiCad symbol and footprint for the CD74HCT393E?
Yes. The symbol is 74xx:74LS393 and the footprint Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CD74HCT393E?
PDIP-14, with 14 pins. Its footprint is drawn on this page.
Where is the CD74HCT393E datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the CD74HCT393E?
JLCPCB lists it as part C1523312, with 0 in stock; the sellers' links on this page open their listings.
What can replace the CD74HCT393E?
Parts like it in the library: the SN74LS90N by Texas Instruments, the SN74HC393N(LX) by lingxingic, the SN74HC90N(LX) by lingxingic and the SN74LS393N(LX) by lingxingic. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the CD74HCT393E?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.