
CD74HCT138E
Texas InstrumentsExtended
-55℃~+125℃ 160uA 3/8 4.5V~5.5V 4mA 4mA 53ns@4.5V,50pF 74HCT Decoder Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHS
- Part id
- ti/CD74HCT138E
- Category
- Signal Switches, Multiplexers, Decoders
- Package
- PDIP-16
- Pins
- 16
- In stock
- 29 at JLCPCB (C1547273)
- Used on
- 1 open-source board
Overview
The CD74HCT138E is a signal Switches, Multiplexers, Decoder made by Texas Instruments in a PDIP-16 package with 16 pins. -55℃~+125℃ 160uA 3/8 4.5V~5.5V 4mA 4mA 53ns@4.5V,50pF 74HCT Decoder Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHS.
PCBKit's library has its KiCad symbol (74xx:74HCT138, from KiCad's library) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 29 are in stock at JLCPCB (part C1547273). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
From the datasheet
9- Supply, least
- 4.5 V · VCC, recommended operating min · p. 4
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 4
- Supply, absolute maximum
- 7 V · VCC, absolute max · p. 4
- Works from
- -55 °C · TA, operating ambient min · p. 4
- Works up to
- 125 °C · TA, operating ambient max · p. 4
- Junction, hottest
- 150 °C · TJ, absolute max · p. 4
- A pin gives at most
- 25 mA · IO, source or sink per output pin absolute max magnitude · p. 4
- Takes working
- 160 µA · VCC supply current max, 5.5 V, VI = VCC and GND, -55°C to 125°C · p. 5
- Junction to air (N (PDIP))
- 67 K/W · Junction-to-ambient thermal resistance · p. 4
What it is and has
3- Outputs
- Select one of eight data outputs · p. 1
- Output polarity
- Active low for '138 · p. 1
- Enable inputs
- Three, to simplify cascading · p. 1
Around it
2- cap 0.1-μF
- between VCC and GND; Bypass each VCC terminal; install as close to the power terminal as possible. · p. 11
- cap 1-μF
- between VCC and GND; Commonly used in parallel with the 0.1-uF bypass capacitor to reject different noise frequencies. · p. 11
Specifications
60| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | over operating free-air temperature range | min -0.5 · max 7 V | 4 |
| Input clamp diode current IIK | For VI < 0.5V or VI > VCC + 0.5V; limit stated as ±20 | max 20 mA | 4 |
| Output clamp diode current IOK | For VO < -0.5V or VO > VCC + 0.5V; limit stated as ±20 | max 20 mA | 4 |
| Output source or sink current per output pin IO | For VO > -0.5V or VO < VCC + 0.5V; limit stated as ±25 | max 25 mA | 4 |
| Continuous current through VCC or GND | Limit stated as ±50 | max 50 mA | 4 |
| Junction temperature TJ | max 150 °C | 4 | |
| Storage temperature range Tstg | min -65 · max 150 °C | 4 | |
| Supply voltage range VCC | HCT types | min 4.5 · max 5.5 V | 4 |
| Input voltage VI | Maximum is VCC | min 0 V | 4 |
| Output voltage VO | Maximum is VCC | min 0 V | 4 |
| Input rise and fall time tt | VCC = 4.5V | max 500 ns | 4 |
| Temperature range TA | min -55 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | CD74HCT138; N (PDIP), 16 Pins | typ 67 °C/W | 4 |
| High-level input voltage VIH | HCT types; VCC = 4.5 to 5.5 V; 25°C | min 2 V | 5 |
| High-level input voltage VIH | HCT types; VCC = 4.5 to 5.5 V; -40°C to 85°C | min 2 V | 5 |
| High-level input voltage VIH | HCT types; VCC = 4.5 to 5.5 V; -55°C to 125°C | min 2 V | 5 |
| Low-level input voltage VIL | HCT types; VCC = 4.5 to 5.5 V; 25°C | max 0.8 V | 5 |
| Low-level input voltage VIL | HCT types; VCC = 4.5 to 5.5 V; -40°C to 85°C | max 0.8 V | 5 |
| Low-level input voltage VIL | HCT types; VCC = 4.5 to 5.5 V; -55°C to 125°C | max 0.8 V | 5 |
| High-level output voltage VOH | HCT types; IOH = – 20 uA; VCC = 4.5 V; 25°C | min 4.4 V | 5 |
| High-level output voltage VOH | HCT types; IOH = – 20 uA; VCC = 4.5 V; -40°C to 85°C | min 4.4 V | 5 |
| High-level output voltage VOH | HCT types; IOH = – 20 uA; VCC = 4.5 V; -55°C to 125°C | min 4.4 V | 5 |
| High-level output voltage VOH | HCT types; IOH = – 4 mA; VCC = 4.5 V; 25°C | min 3.98 V | 5 |
| High-level output voltage VOH | HCT types; IOH = – 4 mA; VCC = 4.5 V; -40°C to 85°C | min 3.84 V | 5 |
| High-level output voltage VOH | HCT types; IOH = – 4 mA; VCC = 4.5 V; -55°C to 125°C | min 3.7 V | 5 |
| Low-level output voltage VOL | HCT types; IOL = 20 uA; VCC = 4.5 V; 25°C | max 0.1 V | 5 |
| Low-level output voltage VOL | HCT types; IOL = 20 uA; VCC = 4.5 V; -40°C to 85°C | max 0.1 V | 5 |
| Low-level output voltage VOL | HCT types; IOL = 20 uA; VCC = 4.5 V; -55°C to 125°C | max 0.1 V | 5 |
| Low-level output voltage VOL | HCT types; IOH = 4 mA as printed; VCC = 4.5 V; 25°C | max 0.26 V | 5 |
| Low-level output voltage VOL | HCT types; IOH = 4 mA as printed; VCC = 4.5 V; -40°C to 85°C | max 0.33 V | 5 |
| Low-level output voltage VOL | HCT types; IOH = 4 mA as printed; VCC = 4.5 V; -55°C to 125°C | max 0.4 V | 5 |
| Input leakage current II | HCT types; VI = VCC and GND; VCC = 5.5 V; 25°C; maximum stated as ±0.1 | max 0.1 uA | 5 |
| Input leakage current II | HCT types; VI = VCC and GND; VCC = 5.5 V; -40°C to 85°C; maximum stated as ±1 | max 1 uA | 5 |
| Input leakage current II | HCT types; VI = VCC and GND; VCC = 5.5 V; -55°C to 125°C; maximum stated as ±1 | max 1 uA | 5 |
| Supply current ICC | HCT types; VI = VCC and GND; VCC = 5.5 V; 25°C | max 8 uA | 5 |
| Supply current ICC | HCT types; VI = VCC and GND; VCC = 5.5 V; -40°C to 85°C | max 80 uA | 5 |
| Supply current ICC | HCT types; VI = VCC and GND; VCC = 5.5 V; -55°C to 125°C | max 160 uA | 5 |
| Additional supply current per input pin ∆ICC | HCT types; A0 - A2 inputs held at VCC – 2.1 V; VCC = 4.5 to 5.5 V; 25°C | typ 100 · max 540 uA | 5 |
| Additional supply current per input pin ∆ICC | HCT types; A0 - A2 inputs held at VCC – 2.1 V; VCC = 4.5 to 5.5 V; -40°C to 85°C | max 675 uA | 5 |
| Additional supply current per input pin ∆ICC | HCT types; A0 - A2 inputs held at VCC – 2.1 V; VCC = 4.5 to 5.5 V; -55°C to 125°C | max 735 uA | 5 |
| Additional supply current per input pin ∆ICC | HCT types; G 0 and G 1 inputs held at VCC – 2.1 V; VCC = 4.5 to 5.5 V; 25°C | typ 100 · max 450 uA | 5 |
| Additional supply current per input pin ∆ICC | HCT types; G 0 and G 1 inputs held at VCC – 2.1 V; VCC = 4.5 to 5.5 V; -40°C to 85°C | max 562.5 uA | 5 |
| Additional supply current per input pin ∆ICC | HCT types; G 0 and G 1 inputs held at VCC – 2.1 V; VCC = 4.5 to 5.5 V; -55°C to 125°C | max 612.5 uA | 5 |
| Additional supply current per input pin ∆ICC | HCT types; G2 input held at VCC – 2.1 V; VCC = 4.5 to 5.5 V; 25°C | typ 100 · max 360 uA | 5 |
| Additional supply current per input pin ∆ICC | HCT types; G2 input held at VCC – 2.1 V; VCC = 4.5 to 5.5 V; -40°C to 85°C | max 450 uA | 5 |
| Additional supply current per input pin ∆ICC | HCT types; G2 input held at VCC – 2.1 V; VCC = 4.5 to 5.5 V; -55°C to 125°C | max 490 uA | 5 |
| Address to output tpd | HCT types; Input tt = 6ns; CL = 15pF and VCC = 5 V per footnote (3); 25°C | typ 14 ns | 6 |
| Address to output tpd | HCT types; Input tt = 6ns; CL = 50pF; VCC = 4.5 V; 25°C | max 35 ns | 6 |
| Address to output tpd | HCT types; Input tt = 6ns; CL = 50pF; VCC = 4.5 V; -40°C to 85°C | max 44 ns | 6 |
| Address to output tpd | HCT types; Input tt = 6ns; CL = 50pF; VCC = 4.5 V; -55°C to 125°C | max 53 ns | 6 |
| Strobe G2 to output HC/HCT138 tpd | HCT types; Input tt = 6ns; CL = 50pF; VCC = 4.5 V; 25°C | max 35 ns | 6 |
| Strobe G2 to output HC/HCT138 tpd | HCT types; Input tt = 6ns; CL = 50pF; VCC = 4.5 V; -40°C to 85°C | max 44 ns | 6 |
| Strobe G2 to output HC/HCT138 tpd | HCT types; Input tt = 6ns; CL = 50pF; VCC = 4.5 V; -55°C to 125°C | max 53 ns | 6 |
| Output transition time tt | HCT types; Input tt = 6ns; CL= 15pF; VCC = 4.5 V; 25°C; unit not printed | max 15 | 6 |
| Output transition time tt | HCT types; Input tt = 6ns; CL= 15pF; VCC = 4.5 V; -40°C to 85°C; unit not printed | max 19 | 6 |
| Output transition time tt | HCT types; Input tt = 6ns; CL= 15pF; VCC = 4.5 V; -55°C to 125°C; unit not printed | max 22 | 6 |
| Power dissipation capacitance Cpd | HCT types; CL = 15pF; VCC = 5 V; 25°C | typ 67 pF | 6 |
| Input capacitance Ci | HCT types; 25°C | max 10 pF | 6 |
| Input capacitance Ci | HCT types; -40°C to 85°C | max 10 pF | 6 |
| Input capacitance Ci | HCT types; -55°C to 125°C | max 10 pF | 6 |
Pins, by the datasheet
16- 1 A0
- Address select 0 · p. 3
- 2 A1
- Address select 1 · p. 3
- 3 A2
- Address select 2 · p. 3
- 4 G0
- Output strobe 0, active low · p. 3
- 5 G1
- Output strobe 1, active low · p. 3
- 6 G2
- Output strobe 2 · p. 3
- 7 Y7
- Output 7 · p. 3
- 8 GND
- Ground · p. 3
- 9 Y6
- Output 6 · p. 3
- 10 Y5
- Output 5 · p. 3
- 11 Y4
- Output 4 · p. 3
- 12 Y3
- Output 3 · p. 3
- 13 Y2
- Output 2 · p. 3
- 14 Y1
- Output 1 · p. 3
- 15 Y0
- Output 0 · p. 3
- 16 VCC
- Positive supply · p. 3
Ordering codes, by the datasheet
1- CD74HCT138E
- PDIP (16) · HCT '138 active-low decoder; PDIP package · p. 1
Open-source boards using it
1- 4 layers100 × 50 mm

Parts like it
8SN74HC138NED-GMIC
DIP-160℃~+70℃ 20ns 2V~6V 3/8 5uA 74HC Decoder Reverse function DIP-16 Signal Switches, Multiplexers, Decoders ROHSGREENMICROSignal Switches, Multiplexers, Decoders74HC138N
DIP-16-40℃~+85℃ 160uA 25mA 2V~6V 3/8 35ns@6.0V,50pF 4mA 74HC Decoder Reverse function Single Supply DIP-16 Signal Switches, Multiplexers, Decoders ROHSHGSEMISignal Switches, Multiplexers, Decoders74HC139N
DIP-16-40℃~+85℃ 160uA 2V~6V 30ns@6.0V,50pF 4/8 5.2mA 5.2mA 74HC Decoder Level shifting Single Supply DIP-16 Signal Switches, Multiplexers, Decoders ROHSHGSEMISignal Switches, Multiplexers, Decoders74HC238N
DIP-16-40℃~+105℃ 26ns@6.0V,50pF 2V~6V 6/8 74HC Decoder Single Supply DIP-16 Signal Switches, Multiplexers, Decoders ROHSHGSEMISignal Switches, Multiplexers, DecodersSN74HC138N
DIP-16-40℃~+85℃ 15ns@6V,50pF 2V~6V 3/8 5.2mA 5.2mA 74HC 80uA Decoder Single Supply DIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, DecodersSN74LS148N
PDIP-160℃~+70℃ 27ns@6V,50pF 4.75V~5.25V 400uA 80uA 8mA Single Supply PDIP-16 Shift Registers ROHSTexas InstrumentsSignal Switches, Multiplexers, DecodersSN74LS153N
PDIP-160℃~+70℃ 17ns@5V,15pF 4.75V~5.25V 400uA 74LS 8/2 8mA Multiplexer Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders74HC4053N
DIP-16-40℃~+85℃ 2V~5.5V 3/6 5ns@4.5V,50pF 74HC 8uA Dual Supply Output enable high-impedance、Tri-state output DIP-16 Signal Switches, Multiplexers, Decoders ROHSHGSEMISignal Switches, Multiplexers, Decoders
Questions
Is there a KiCad symbol and footprint for the CD74HCT138E?
Yes. The symbol is 74xx:74HCT138 and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CD74HCT138E?
PDIP-16, with 16 pins. Its footprint is drawn on this page.
Where is the CD74HCT138E datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the CD74HCT138E?
JLCPCB lists it as part C1547273, with 29 in stock; the sellers' links on this page open their listings.
What can replace the CD74HCT138E?
Parts like it in the library: the SN74HC138NED-GMIC by GREENMICRO, the 74HC138N by HGSEMI, the 74HC139N by HGSEMI and the 74HC238N by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the CD74HCT138E?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.