CD74HC4051PW
Texas InstrumentsExtended
-55℃~+125℃ 12ns@4.5V,50pF 2V~6V 74HC 8/1 8uA Break-before-make function Dual Supply TSSOP-16 Signal Switches, Multiplexers, Decoders ROHS
- Part id
- ti/CD74HC4051PW
- Category
- Analog Switches, Multiplexers
- Package
- TSSOP-16
- Pins
- 16
- In stock
- 6,109 at JLCPCB (C352826)
Overview
The CD74HC4051PW is an analog Switches, Multiplexer made by Texas Instruments in a TSSOP-16 package with 16 pins. -55℃~+125℃ 12ns@4.5V,50pF 2V~6V 74HC 8/1 8uA Break-before-make function Dual Supply TSSOP-16 Signal Switches, Multiplexers, Decoders ROHS.
PCBKit's library has its KiCad symbol (74xx:74HC4051, from KiCad's library) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 6,109 are in stock at JLCPCB (part C352826).
Symbol
Footprint
From the datasheet
14- Supply, least
- 2 V · VCC, recommended operating min · p. 6
- Supply, most
- 6 V · VCC, recommended operating max · p. 6
- Supply, most
- 10 V · VCC – VEE, recommended operating max · p. 6
- Supply, least
- 6 V · VEE, recommended operating min · p. 6
- Supply, absolute maximum
- 7 V · VCC, absolute max · p. 6
- Supply, absolute maximum
- 10.5 V · VCC – VEE, absolute max · p. 6
- Works from
- -55 °C · Operating free-air temperature min · p. 6
- Works up to
- 125 °C · Operating free-air temperature max · p. 6
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 6
- A pin gives at most
- 25 mA · DC switch current absolute max magnitude · p. 6
- Takes working
- 8 µA · VCC quiescent max, IO = 0, VCC = 6 V, VEE = 0 V, TA = 25°C · p. 9
- Junction to air (PW (TSSOP))
- 107.7 K/W · Junction-to-ambient thermal resistance · p. 7
- Junction to case (PW (TSSOP))
- 42.4 K/W · Junction-to-case top thermal resistance · p. 7
- Junction to board (PW (TSSOP))
- 52.8 K/W · Junction-to-board thermal resistance · p. 7
What it is and has
4- ON resistance
- 70Ω typical at VCC – VEE = 4.5V · p. 1
- ON resistance
- 40Ω typical at VCC – VEE = 9V · p. 1
- Package
- TSSOP (16), 5.00mm × 4.40mm · p. 1
- Analog input voltage range
- ±5 V maximum · p. 1
Around it
1- cap 0.1-μF
- between VCC and GND; Recommended bypass capacitor for a single supply; install as close as possible to the power terminal. · p. 24
Specifications
128| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| DC supply voltage VCC – VEE | Over operating free-air temperature range | min -0.5 · max 10.5 V | 6 |
| DC supply voltage VCC | Over operating free-air temperature range | min -0.5 · max 7 V | 6 |
| DC supply voltage VEE | Over operating free-air temperature range; limits retain the printed MIN and MAX columns | min 0.5 · max -7 V | 6 |
| DC input diode current IIK | VI < – 0.5 V or VI > VCC + 0.5 V; ± limit | max 20 mA | 6 |
| DC switch diode current IOK | VI < VEE – 0.5 V or VI > VCC + 0.5 V; ± limit | max 20 mA | 6 |
| DC switch current | VI > VEE – 0.5 V or VI < VCC + 0.5 V; ± limit | max 25 mA | 6 |
| DC VCC or ground current ICC | ± limit | max 50 mA | 6 |
| DC VEE current IEE | max -20 mA | 6 | |
| Maximum junction temperature TJMAX | max 150 °C | 6 | |
| Maximum lead temperature TLMAX | Soldering 10 s | max 300 °C | 6 |
| Junction temperature TJ | max 150 °C | 6 | |
| Storage temperature Tstg | min -65 · max 150 °C | 6 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ± rating | max 500 V | 6 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101 or ANSI/ESDA/JEDEC JS-002; ± rating | max 200 V | 6 |
| Supply voltage range VCC | CD54 and 74HC types; TA = full package temperature range | min 2 · max 6 V | 6 |
| Supply voltage range VCC – VEE | CD54 and 74HC types, CD54 and 74HCT types; TA = full package temperature range; see Figure 1 | min 2 · max 10 V | 6 |
| Supply voltage range VEE | TA = full package temperature range; see Figure 2; limits retain the printed MIN and MAX columns | min 0 · max -6 V | 6 |
| Operating temperature TA | min -55 · max 125 °C | 6 | |
| Input rise and fall times tr, tf | VCC = 2 V | min 0 · max 1000 ns | 6 |
| Input rise and fall times tr, tf | VCC = 4.5 V | min 0 · max 500 ns | 6 |
| Input rise and fall times tr, tf | VCC = 6 V | min 0 · max 400 ns | 6 |
| Junction-to-ambient thermal resistance RθJA | CD74HC4051; PW (TSSOP); 16 PINS | typ 107.7 °C/W | 7 |
| Junction-to-case (top) thermal resistance RθJC(top) | CD74HC4051; PW (TSSOP); 16 PINS | typ 42.4 °C/W | 7 |
| Junction-to-board thermal resistance RθJB | CD74HC4051; PW (TSSOP); 16 PINS | typ 52.8 °C/W | 7 |
| Junction-to-top characterization parameter ψJT | CD74HC4051; PW (TSSOP); 16 PINS | typ 4.2 °C/W | 7 |
| Junction-to-board characterization parameter ψJB | CD74HC4051; PW (TSSOP); 16 PINS | typ 52.2 °C/W | 7 |
| High-level input voltage VIH | VCC = 2 V; TA = 25°C | min 1.5 V | 7 |
| High-level input voltage VIH | VCC = 2 V; TA = –40°C to +85°C | min 1.5 V | 7 |
| High-level input voltage VIH | VCC = 2 V; TA = –55°C to +125°C | min 1.5 V | 7 |
| High-level input voltage VIH | VCC = 4.5 V; TA = 25°C | min 3.15 V | 7 |
| High-level input voltage VIH | VCC = 4.5 V; TA = –40°C to +85°C | min 3.15 V | 7 |
| High-level input voltage VIH | VCC = 4.5 V; TA = –55°C to +125°C | min 3.15 V | 7 |
| High-level input voltage VIH | VCC = 6 V; TA = 25°C | min 4.2 V | 7 |
| High-level input voltage VIH | VCC = 6 V; TA = –40°C to +85°C | min 4.2 V | 7 |
| High-level input voltage VIH | VCC = 6 V; TA = –55°C to +125°C | min 4.2 V | 7 |
| Low-level input voltage VIL | VCC = 2 V; TA = 25°C | max 0.5 V | 7 |
| Low-level input voltage VIL | VCC = 2 V; TA = –40°C to +85°C | max 0.5 V | 7 |
| Low-level input voltage VIL | VCC = 2 V; TA = –55°C to +125°C | max 0.5 V | 7 |
| Low-level input voltage VIL | VCC = 4.5 V; TA = 25°C | max 1.35 V | 7 |
| Low-level input voltage VIL | VCC = 4.5 V; TA = –40°C to +85°C | max 1.35 V | 7 |
| Low-level input voltage VIL | VCC = 4.5 V; TA = –55°C to +125°C | max 1.35 V | 7 |
| Low-level input voltage VIL | VCC = 6 V; TA = 25°C | max 1.8 V | 7 |
| Low-level input voltage VIL | VCC = 6 V; TA = –40°C to +85°C | max 1.8 V | 7 |
| Low-level input voltage VIL | VCC = 6 V; TA = –55°C to +125°C | max 1.8 V | 7 |
| ON resistance rON | IO = 1 mA; VIS = VCC or VEE; VI = VIL or VIH; VEE = 0 V; VCC = 4.5 V; TA = 25°C | typ 70 · max 160 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC or VEE; VI = VIL or VIH; VEE = 0 V; VCC = 4.5 V; TA = –40°C to +85°C | max 200 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC or VEE; VI = VIL or VIH; VEE = 0 V; VCC = 4.5 V; TA = –55°C to +125°C | max 240 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC or VEE; VI = VIL or VIH; VEE = 0 V; VCC = 6 V; TA = 25°C | typ 60 · max 140 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC or VEE; VI = VIL or VIH; VEE = 0 V; VCC = 6 V; TA = –40°C to +85°C | max 175 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC or VEE; VI = VIL or VIH; VEE = 0 V; VCC = 6 V; TA = –55°C to +125°C | max 210 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC or VEE; VI = VIL or VIH; VEE = –4.5 V; VCC = 4.5 V; TA = 25°C | typ 40 · max 120 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC or VEE; VI = VIL or VIH; VEE = –4.5 V; VCC = 4.5 V; TA = –40°C to +85°C | max 150 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC or VEE; VI = VIL or VIH; VEE = –4.5 V; VCC = 4.5 V; TA = –55°C to +125°C | max 180 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC to VEE; VI = VIL or VIH; VEE = 0 V; VCC = 4.5 V; TA = –40°C to +85°C | max 225 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC to VEE; VI = VIL or VIH; VEE = 0 V; VCC = 4.5 V; TA = –55°C to +125°C | max 270 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC to VEE; VI = VIL or VIH; VEE = 0 V; VCC = 6 V; TA = 25°C | typ 80 · max 160 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC to VEE; VI = VIL or VIH; VEE = 0 V; VCC = 6 V; TA = –40°C to +85°C | max 200 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC to VEE; VI = VIL or VIH; VEE = 0 V; VCC = 6 V; TA = –55°C to +125°C | max 240 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC to VEE; VI = VIL or VIH; VEE = –4.5 V; VCC = 4.5 V; TA = 25°C | typ 45 · max 130 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC to VEE; VI = VIL or VIH; VEE = –4.5 V; VCC = 4.5 V; TA = –40°C to +85°C | max 162 Ω | 8 |
| ON resistance rON | IO = 1 mA; VIS = VCC to VEE; VI = VIL or VIH; VEE = –4.5 V; VCC = 4.5 V; TA = –55°C to +125°C | max 195 Ω | 8 |
| Maximum ON resistance between any two channels ΔrON | VEE = 0 V; VCC = 4.5 V; TA = 25°C | typ 10 Ω | 8 |
| Maximum ON resistance between any two channels ΔrON | VEE = 0 V; VCC = 6 V; TA = 25°C | typ 8.5 Ω | 8 |
| Maximum ON resistance between any two channels ΔrON | VEE = –4.5 V; VCC = 4.5 V; TA = 25°C | typ 5 Ω | 8 |
| Switch ON/OFF leakage current IIZ | 8 channels; VEE = 0 V; VCC = 6 V; VI = VIL or VIH; TA = 25°C; OFF: VIS = VCC, VOS = VEE or VIS = VEE, VOS = VCC; ON: all applicable combinations of VIS and VOS voltage levels; ± limit | max 0.2 uA | 9 |
| Switch ON/OFF leakage current IIZ | 8 channels; VEE = 0 V; VCC = 6 V; VI = VIL or VIH; TA = –40°C to +85°C; OFF: VIS = VCC, VOS = VEE or VIS = VEE, VOS = VCC; ON: all applicable combinations of VIS and VOS voltage levels; ± limit | max 2 uA | 9 |
| Switch ON/OFF leakage current IIZ | 8 channels; VEE = 0 V; VCC = 6 V; VI = VIL or VIH; TA = –55°C to +125°C; OFF: VIS = VCC, VOS = VEE or VIS = VEE, VOS = VCC; ON: all applicable combinations of VIS and VOS voltage levels; ± limit | max 2 uA | 9 |
| Switch ON/OFF leakage current IIZ | 4051; VEE = –5 V; VCC = 5 V; VI = VIL or VIH; TA = 25°C; OFF: VIS = VCC, VOS = VEE or VIS = VEE, VOS = VCC; ON: all applicable combinations of VIS and VOS voltage levels; ± limit | max 0.4 uA | 9 |
| Switch ON/OFF leakage current IIZ | 4051; VEE = –5 V; VCC = 5 V; VI = VIL or VIH; TA = –40°C to +85°C; OFF: VIS = VCC, VOS = VEE or VIS = VEE, VOS = VCC; ON: all applicable combinations of VIS and VOS voltage levels; ± limit | max 4 uA | 9 |
| Switch ON/OFF leakage current IIZ | 4051; VEE = –5 V; VCC = 5 V; VI = VIL or VIH; TA = –55°C to +125°C; OFF: VIS = VCC, VOS = VEE or VIS = VEE, VOS = VCC; ON: all applicable combinations of VIS and VOS voltage levels; ± limit | max 4 uA | 9 |
| Control input leakage current IIL | VI = VCC or GND; VEE = 0 V; VCC = 6 V; TA = 25°C; ± limit | max 0.1 uA | 9 |
| Control input leakage current IIL | VI = VCC or GND; VEE = 0 V; VCC = 6 V; TA = –40°C to +85°C; ± limit | max 1 uA | 9 |
| Control input leakage current IIL | VI = VCC or GND; VEE = 0 V; VCC = 6 V; TA = –55°C to +125°C; ± limit | max 1 uA | 9 |
| Quiescent device current ICC | IO = 0; VIS = VEE; VOS = VCC; VI = VCC or GND; VEE = 0 V; VCC = 6 V; TA = 25°C | max 8 uA | 9 |
| Quiescent device current ICC | IO = 0; VIS = VEE; VOS = VCC; VI = VCC or GND; VEE = 0 V; VCC = 6 V; TA = –40°C to +85°C | max 80 uA | 9 |
| Quiescent device current ICC | IO = 0; VIS = VEE; VOS = VCC; VI = VCC or GND; VEE = 0 V; VCC = 6 V; TA = –55°C to +125°C | max 160 uA | 9 |
| Quiescent device current ICC | IO = 0; VIS = VCC; VOS = VEE; VI = VCC or GND; VEE = –5 V; VCC = 5 V; TA = 25°C | max 16 uA | 9 |
| Quiescent device current ICC | IO = 0; VIS = VCC; VOS = VEE; VI = VCC or GND; VEE = –5 V; VCC = 5 V; TA = –40°C to +85°C | max 160 uA | 9 |
| Quiescent device current ICC | IO = 0; VIS = VCC; VOS = VEE; VI = VCC or GND; VEE = –5 V; VCC = 5 V; TA = –55°C to +125°C | max 320 uA | 9 |
| Propagation delay tPHL, tPLH | CDx4HC4051; Switch IN to OUT; VCC = 5 V, TA = 25°C, input tr, tf = 6 ns, CL = 15 pF | typ 4 ns | 12 |
| Propagation delay tPHZ, tPLZ | CDx4HC4051; Switch turn-off (S or E); VCC = 5 V, TA = 25°C, input tr, tf = 6 ns, CL = 15 pF | typ 19 ns | 12 |
| Propagation delay tPZH, tPZL | CDx4HC4051; Switch turn-on (S or E); VCC = 5 V, TA = 25°C, input tr, tf = 6 ns, CL = 15 pF | typ 19 ns | 12 |
| Power dissipation capacitance CPD | CDx4HC4051; VCC = 5 V, TA = 25°C, input tr, tf = 6 ns | typ 50 pF | 12 |
| Propagation delay, switch in to out tPLH, tPHL | HC; VEE = 0 V, VCC = 2 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 60 ns | 13 |
| Propagation delay, switch in to out tPLH, tPHL | HC; VEE = 0 V, VCC = 2 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 75 ns | 13 |
| Propagation delay, switch in to out tPLH, tPHL | HC; VEE = 0 V, VCC = 2 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 90 ns | 13 |
| Propagation delay, switch in to out tPLH, tPHL | HC; VEE = 0 V, VCC = 4.5 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 12 ns | 13 |
| Propagation delay, switch in to out tPLH, tPHL | HC; VEE = 0 V, VCC = 4.5 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 15 ns | 13 |
| Propagation delay, switch in to out tPLH, tPHL | HC; VEE = 0 V, VCC = 6 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 13 ns | 13 |
| Propagation delay, switch in to out tPLH, tPHL | HC; VEE = 0 V, VCC = 6 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 15 ns | 13 |
| Propagation delay, switch in to out tPLH, tPHL | HC; VEE = –4.5 V, VCC = 4.5 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 8 ns | 13 |
| Propagation delay, switch in to out tPLH, tPHL | HC; VEE = –4.5 V, VCC = 4.5 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 10 ns | 13 |
| Propagation delay, switch in to out tPLH, tPHL | HC; VEE = –4.5 V, VCC = 4.5 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 12 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = 0 V, VCC = 2 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 225 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = 0 V, VCC = 2 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 280 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = 0 V, VCC = 2 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 340 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = 0 V, VCC = 4.5 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 45 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = 0 V, VCC = 4.5 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 56 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = 0 V, VCC = 4.5 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 68 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = 0 V, VCC = 6 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 38 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = 0 V, VCC = 6 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 48 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = 0 V, VCC = 6 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 57 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = –4.5 V, VCC = 4.5 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 32 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = –4.5 V, VCC = 4.5 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 40 ns | 13 |
| Maximum switch turn OFF delay from S or E to switch output tPHZ, tPLZ | 4051, HC; VEE = –4.5 V, VCC = 4.5 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 48 ns | 13 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = 0 V, VCC = 2 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 225 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = 0 V, VCC = 2 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 280 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = 0 V, VCC = 2 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 340 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = 0 V, VCC = 4.5 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 45 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = 0 V, VCC = 4.5 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 56 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = 0 V, VCC = 4.5 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 68 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = 0 V, VCC = 6 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 38 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = 0 V, VCC = 6 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 48 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = 0 V, VCC = 6 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 57 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = –4.5 V, VCC = 4.5 V, TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 32 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = –4.5 V, VCC = 4.5 V, TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 40 ns | 14 |
| Maximum switch turn ON delay from S or E to switch output tPZL, tPZH | 4051, HC; VEE = –4.5 V, VCC = 4.5 V, TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 48 ns | 14 |
| Input (control) capacitance CI | HC; TA = 25°C; CL = 50 pF, input tr, tf = 6 ns | max 10 pF | 15 |
| Input (control) capacitance CI | HC; TA = –40°C to +85°C; CL = 50 pF, input tr, tf = 6 ns | max 10 pF | 15 |
| Input (control) capacitance CI | HC; TA = –55°C to +125°C; CL = 50 pF, input tr, tf = 6 ns | max 10 pF | 15 |
| Switch input capacitance CI | All HC, HCT types; TA = 25°C | typ 5 pF | 16 |
| Common output capacitance CCOM | 4051; TA = 25°C | typ 25 pF | 16 |
| Minimum switch frequency response at –3 dB (see Figure 3, Figure 5, and Figure 7) fMAX | 4051; VEE = –2.25 V, VCC = 2.25 V, TA = 25°C; See Figure 10 (1) (2) | typ 145 MHz | 16 |
| Minimum switch frequency response at –3 dB (see Figure 3, Figure 5, and Figure 7) fMAX | 4051; VEE = –4.5 V, VCC = 4.5 V, TA = 25°C; See Figure 10 (1) (2) | typ 180 MHz | 16 |
| Sine-wave distortion | All HC, HCT types; TA = 25°C; See Figure 12; VEE and VCC columns printed as –2.25% and 2.25% | typ 0.035 % | 16 |
| Sine-wave distortion | All HC, HCT types; TA = 25°C; See Figure 12; VEE and VCC columns printed as –4.5% and 4.5% | typ 0.018 % | 16 |
| Switch OFF signal feedthrough (see Figure 4, Figure 6, and Figure 8) | 4051; VEE = –2.25 V, VCC = 2.25 V, TA = 25°C; See Figure 14 (2) (3) | typ -73 dB | 16 |
| Switch OFF signal feedthrough (see Figure 4, Figure 6, and Figure 8) | 4051; VEE = –4.5 V, VCC = 4.5 V, TA = 25°C; See Figure 14 (2) (3) | typ -75 dB | 16 |
Pins, by the datasheet
16- 1 CH A4 IN/OUT
- Channel 4 in/out. · p. 3
- 2 CH A6 IN/OUT
- Channel 6 in/out. · p. 3
- 3 COM OUT/IN
- Common out/in. · p. 3
- 4 CH A7 IN/OUT
- Channel 7 in/out. · p. 3
- 5 CH A5 IN/OUT
- Channel 5 in/out. · p. 3
- 6 E
- Enable Channels (Active Low). See Table 1. · p. 3
- 7 VEE
- Negative power input. · p. 3
- 8 GND
- Ground. · p. 3
- 9 S2
- Channel select 2. See Table 1. · p. 3
- 10 S1
- Channel select 1. See Table 1. · p. 3
- 11 S0
- Channel select 0. See Table 1. · p. 3
- 12 CH A3 IN/OUT
- Channel 3 in/out. · p. 3
- 13 CH A0 IN/OUT
- Channel 0 in/out. · p. 3
- 14 CH A1 IN/OUT
- Channel 1 in/out. · p. 3
- 15 CH A2 IN/OUT
- Channel 2 in/out. · p. 3
- 16 VCC
- Positive power input. · p. 3
Parts like it
8CD4051BPW
TSSOP-16-55℃~+125℃ 1 125Ω 20MHz 30ns 30pF 3V~20V 8:1 TSSOP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers74HC4052PW
TSSOP-16-40℃~+125℃ 180MHz 2 27ns 2V~10V 38ns 4:1 5ns 80Ω TSSOP-16 Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, MultiplexersCD74HC4053PW
TSSOP-16-55℃~+125℃ 2:1 2V~6V 3 4ns 70Ω Bidirectional analog channel、Glitch-free switching TSSOP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersTMUX1208PW
TSSOP-16-40℃~+125℃ 1 1.08V~5.5V 5Ω 65MHz 85pF 8:1 Bidirectional analog channel、Fault protection、Fail-safe disconnect TSSOP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers74HC4053PW,118
TSSOP-16-40℃~+125℃ 12ns 20ns 21ns 2:1 2V~10V 3 80Ω TSSOP-16 Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, MultiplexersCD4052BPW
TSSOP-16-55℃~+125℃ 125Ω 160ns 18pF 25MHz 3V~20V 4:1 TSSOP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersTPW4051-TR
TSSOP-16-40℃~+125℃ 1 200MHz 25pF 3V~12V 50ns 50Ω 5ns 60ns 8:1 Glitch-free switching TSSOP-16 Analog Switches, Multiplexers ROHS3PEAKAnalog Switches, Multiplexers74HC4051MT/TR
TSSOP-16-40℃~+125℃ -6V~0V、2V~6V 12ns 180MHz 38ns 45ns 70Ω 8 8:1 Bidirectional analog channel TSSOP-16 Analog Switches, Multiplexers ROHSHGSEMIAnalog Switches, Multiplexers
Questions
Is there a KiCad symbol and footprint for the CD74HC4051PW?
Yes. The symbol is 74xx:74HC4051 and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CD74HC4051PW?
TSSOP-16, with 16 pins. Its footprint is drawn on this page.
Where is the CD74HC4051PW datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the CD74HC4051PW?
JLCPCB lists it as part C352826, with 6,109 in stock; the sellers' links on this page open their listings.
What can replace the CD74HC4051PW?
Parts like it in the library: the CD4051BPW by Texas Instruments, the 74HC4052PW by Nexperia, the CD74HC4053PW by Texas Instruments and the TMUX1208PW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.