Overview
The CD40106BPW is an inverter made by Texas Instruments in a TSSOP-14 package with 14 pins. -55℃~+125℃ 1 120ns@15V,50pF 3.4mA 3.4mA 3.6V~10.8V 3V~18V 4.95V、9.95V、14.95V 4000B Series 4uA 50mV 6 900mV~4V Schmitt trigger TSSOP-14 Inverters ROHS.
PCBKit's library has its KiCad symbol (4xxx:40106, from KiCad's library) and its footprint (Package_SO:TSSOP-14_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 12,205 are in stock at JLCPCB (part C58834).
Symbol
Footprint
From the datasheet
13- Supply, least
- 3 V · VDD, recommended operating minimum · p. 4
- Supply, most
- 18 V · VDD, recommended operating maximum · p. 4
- Supply, absolute maximum
- 20 V · VDD, absolute maximum · p. 4
- Works from
- -55 °C · Operating free-air temperature minimum · p. 4
- Works up to
- 125 °C · Operating free-air temperature maximum · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute maximum · p. 4
- Takes working
- 20 nA · VDD quiescent device current typical, 5 V, VIN = 0 or 5 V, TA = 25°C · p. 5
- Junction to air (PW (TSSOP))
- 114.1 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (PW (TSSOP))
- 39.1 K/W · Junction-to-case (top) thermal resistance · p. 4
- Junction to board (PW (TSSOP))
- 56.9 K/W · Junction-to-board thermal resistance · p. 4
- Edge
- 100 ns · Output transition time typical, VDD = 5 V, CL = 50 pF, RL = 200 kΩ, TA = 25°C · p. 8
- Edge
- 50 ns · Output transition time typical, VDD = 10 V, CL = 50 pF, RL = 200 kΩ, TA = 25°C · p. 8
- Edge
- 40 ns · Output transition time typical, VDD = 15 V, CL = 50 pF, RL = 200 kΩ, TA = 25°C · p. 8
What it is and has
8- Inverters
- Six independent inverters with Schmitt-trigger inputs · p. 13
- Input rise and fall times
- No limit · p. 1
- Output characteristics
- Standardized, symmetrical · p. 1
- Package
- TSSOP, 14 pins, 4.40 mm x 5.00 mm body · p. 1
- Inputs
- Schmitt-trigger · p. 1
- Hysteresis voltage
- 0.9 V typical at VDD = 5 V · p. 1
- Hysteresis voltage
- 2.3 V typical at VDD = 10 V · p. 1
- Hysteresis voltage
- 3.5 V typical at VDD = 15 V · p. 1
Around it
1- cap 0.1-µF
- between VDD and VSS; Supply bypass capacitor; place as close as possible to the supply pin. This recommendation calls the supply terminal VCC. · p. 16
Specifications
135| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| DC supply voltage VDD | Voltages referenced to VSS terminal | min -0.5 · max 20 V | 4 |
| Input voltage, all inputs | min -0.5 V | 4 | |
| DC input current, any one input | Maximum magnitude; rating is ±10 mA | max 10 mA | 4 |
| Power dissipation PD | TA = –55°C to +100°C | max 500 mW | 4 |
| Power dissipation PD | TA = 100°C to 125°C | max 200 mW | 4 |
| Device dissipation per output transistor | max 100 mW | 4 | |
| Maximum junction temperature TJ | max 150 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; table VALUE column | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; table VALUE column | max 1000 V | 4 |
| Supply voltage | Over operating free-air temperature range | min 3 · max 18 V | 4 |
| Operating temperature TA | min -55 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | PW (TSSOP), 14 pins | typ 114.1 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | PW (TSSOP), 14 pins | typ 39.1 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | PW (TSSOP), 14 pins | typ 56.9 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | PW (TSSOP), 14 pins | typ 3.1 °C/W | 4 |
| Junction-to-board characterization parameter ψJB | PW (TSSOP), 14 pins | typ 56.2 °C/W | 4 |
| Quiescent device current IDDmax | VIN = 0 or 5, VDD = 5; TA = –55°C | max 1 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 5, VDD = 5; TA = –40°C | max 1 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 5, VDD = 5; TA = 25°C | typ 0.02 · max 1 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 5, VDD = 5; TA = 85°C | max 30 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 5, VDD = 5; TA = 125°C | max 30 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 10, VDD = 10; TA = –55°C | max 2 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 10, VDD = 10; TA = –40°C | max 2 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 10, VDD = 10; TA = 25°C | typ 0.02 · max 2 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 10, VDD = 10; TA = 85°C | max 60 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 10, VDD = 10; TA = 125°C | max 60 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 15, VDD = 15; TA = –55°C | max 4 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 15, VDD = 15; TA = –40°C | max 4 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 15, VDD = 15; TA = 25°C | typ 0.02 · max 4 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 15, VDD = 15; TA = 85°C | max 120 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 15, VDD = 15; TA = 125°C | max 120 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 20, VDD = 20; TA = –55°C | max 20 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 20, VDD = 20; TA = –40°C | max 20 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 20, VDD = 20; TA = 25°C | typ 0.04 · max 20 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 20, VDD = 20; TA = 85°C | max 600 uA | 5 |
| Quiescent device current IDDmax | VIN = 0 or 20, VDD = 20; TA = 125°C | max 600 uA | 5 |
| Positive trigger threshold voltage VPmin | VDD = 5; TA = –55°C | min 2.2 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 5; TA = –40°C | min 2.2 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 5; TA = 25°C | min 2.2 · typ 2.9 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 5; TA = 85°C | min 2.2 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 5; TA = 125°C | min 2.2 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 10; TA = –55°C | min 4.6 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 10; TA = –40°C | min 4.6 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 10; TA = 25°C | min 4.6 · typ 5.9 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 10; TA = 85°C | min 4.6 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 10; TA = 125°C | min 4.6 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 15; TA = –55°C | min 6.8 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 15; TA = –40°C | min 6.8 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 15; TA = 25°C | min 6.8 · typ 8.8 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 15; TA = 85°C | min 6.8 V | 5 |
| Positive trigger threshold voltage VPmin | VDD = 15; TA = 125°C | min 6.8 V | 5 |
| Hysteresis voltage VHmin | VDD = 5; TA = –55°C | min 0.3 V | 7 |
| Hysteresis voltage VHmin | VDD = 5; TA = –40°C | min 0.3 V | 7 |
| Hysteresis voltage VHmin | VDD = 5; TA = 25°C | min 0.3 · typ 0.9 V | 7 |
| Hysteresis voltage VHmin | VDD = 5; TA = 85°C | min 0.3 V | 7 |
| Hysteresis voltage VHmin | VDD = 5; TA = 125°C | min 0.3 V | 7 |
| Hysteresis voltage VHmin | VDD = 10; TA = –55°C | min 1.2 V | 7 |
| Hysteresis voltage VHmin | VDD = 10; TA = –40°C | min 1.2 V | 7 |
| Hysteresis voltage VHmin | VDD = 10; TA = 25°C | min 1.2 · typ 2.3 V | 7 |
| Hysteresis voltage VHmin | VDD = 10; TA = 85°C | min 1.2 V | 7 |
| Hysteresis voltage VHmin | VDD = 10; TA = 125°C | min 1.2 V | 7 |
| Hysteresis voltage VHmin | VDD = 15; TA = –55°C | min 1.6 V | 7 |
| Hysteresis voltage VHmin | VDD = 15; TA = –40°C | min 1.6 V | 7 |
| Hysteresis voltage VHmin | VDD = 15; TA = 25°C | min 1.6 · typ 3.5 V | 7 |
| Hysteresis voltage VHmin | VDD = 15; TA = 85°C | min 1.6 V | 7 |
| Hysteresis voltage VHmin | VDD = 15; TA = 125°C | min 1.6 V | 7 |
| Hysteresis voltage VHmax | VDD = 5; TA = –55°C | max 1.6 V | 7 |
| Hysteresis voltage VHmax | VDD = 5; TA = –40°C | max 1.6 V | 7 |
| Hysteresis voltage VHmax | VDD = 5; TA = 25°C | typ 0.9 · max 1.6 V | 7 |
| Hysteresis voltage VHmax | VDD = 5; TA = 85°C | max 1.6 V | 7 |
| Hysteresis voltage VHmax | VDD = 5; TA = 125°C | max 1.6 V | 7 |
| Hysteresis voltage VHmax | VDD = 10; TA = –55°C | max 3.4 V | 7 |
| Hysteresis voltage VHmax | VDD = 10; TA = –40°C | max 3.4 V | 7 |
| Hysteresis voltage VHmax | VDD = 10; TA = 25°C | typ 2.3 · max 3.4 V | 7 |
| Hysteresis voltage VHmax | VDD = 10; TA = 85°C | max 3.4 V | 7 |
| Hysteresis voltage VHmax | VDD = 10; TA = 125°C | max 3.4 V | 7 |
| Hysteresis voltage VHmax | VDD = 15; TA = –55°C | max 5 V | 7 |
| Hysteresis voltage VHmax | VDD = 15; TA = –40°C | max 5 V | 7 |
| Hysteresis voltage VHmax | VDD = 15; TA = 25°C | typ 3.5 · max 5 V | 7 |
| Hysteresis voltage VHmax | VDD = 15; TA = 85°C | max 5 V | 7 |
| Hysteresis voltage VHmax | VDD = 15; TA = 125°C | max 5 V | 7 |
| Output low (sink) current IOLmin | VO = 0.4, VIN = 0 or 5, VDD = 5; TA = –55°C | min 0.64 mA | 7 |
| Output low (sink) current IOLmin | VO = 0.4, VIN = 0 or 5, VDD = 5; TA = –40°C | min 0.61 mA | 7 |
| Output low (sink) current IOLmin | VO = 0.4, VIN = 0 or 5, VDD = 5; TA = 25°C | min 0.51 · typ 1 mA | 7 |
| Output low (sink) current IOLmin | VO = 0.4, VIN = 0 or 5, VDD = 5; TA = 85°C | min 0.42 mA | 7 |
| Output low (sink) current IOLmin | VO = 0.4, VIN = 0 or 5, VDD = 5; TA = 125°C | min 0.36 mA | 7 |
| Output low (sink) current IOLmin | VO = 0.5, VIN = 0 or 10, VDD = 10; TA = –55°C | min 1.6 mA | 7 |
| Output low (sink) current IOLmin | VO = 0.5, VIN = 0 or 10, VDD = 10; TA = –40°C | min 1.5 mA | 7 |
| Output low (sink) current IOLmin | VO = 0.5, VIN = 0 or 10, VDD = 10; TA = 25°C | min 1.3 · typ 2.6 mA | 7 |
| Output low (sink) current IOLmin | VO = 0.5, VIN = 0 or 10, VDD = 10; TA = 85°C | min 1.1 mA | 7 |
| Output low (sink) current IOLmin | VO = 0.5, VIN = 0 or 10, VDD = 10; TA = 125°C | min 0.9 mA | 7 |
| Output low (sink) current IOLmin | VO = 1.5, VIN = 0 or 15, VDD = 15; TA = –55°C | min 4.2 mA | 7 |
| Output low (sink) current IOLmin | VO = 1.5, VIN = 0 or 15, VDD = 15; TA = –40°C | min 4 mA | 7 |
| Output low (sink) current IOLmin | VO = 1.5, VIN = 0 or 15, VDD = 15; TA = 25°C | min 3.4 · typ 6.8 mA | 7 |
| Output low (sink) current IOLmin | VO = 1.5, VIN = 0 or 15, VDD = 15; TA = 85°C | min 2.8 mA | 7 |
| Output low (sink) current IOLmin | VO = 1.5, VIN = 0 or 15, VDD = 15; TA = 125°C | min 2.4 mA | 7 |
| Output high (source) current IOHmin | VO = 4.6, VIN = 0 or 5, VDD = 5; TA = –55°C | min -0.64 mA | 8 |
| Output high (source) current IOHmin | VO = 4.6, VIN = 0 or 5, VDD = 5; TA = –40°C | min -0.61 mA | 8 |
| Output high (source) current IOHmin | VO = 4.6, VIN = 0 or 5, VDD = 5; TA = 25°C | min -0.51 · typ -1 mA | 8 |
| Output high (source) current IOHmin | VO = 4.6, VIN = 0 or 5, VDD = 5; TA = 85°C | min -0.42 mA | 8 |
| Output high (source) current IOHmin | VO = 4.6, VIN = 0 or 5, VDD = 5; TA = 125°C | min -0.36 mA | 8 |
| Output high (source) current IOHmin | VO = 2.5, VIN = 0 or 5, VDD = 5; TA = –55°C | min -2 mA | 8 |
| Output high (source) current IOHmin | VO = 2.5, VIN = 0 or 5, VDD = 5; TA = –40°C | min -1.8 mA | 8 |
| Output high (source) current IOHmin | VO = 2.5, VIN = 0 or 5, VDD = 5; TA = 25°C | min -1.6 · typ -3.2 mA | 8 |
| Output high (source) current IOHmin | VO = 2.5, VIN = 0 or 5, VDD = 5; TA = 85°C | min -1.3 mA | 8 |
| Output high (source) current IOHmin | VO = 2.5, VIN = 0 or 5, VDD = 5; TA = 125°C | min -1.15 mA | 8 |
| Output high (source) current IOHmin | VO = 9.5, VIN = 0 or 10, VDD = 10; TA = –55°C | min -1.6 mA | 8 |
| Output high (source) current IOHmin | VO = 9.5, VIN = 0 or 10, VDD = 10; TA = –40°C | min -1.5 mA | 8 |
| Output high (source) current IOHmin | VO = 9.5, VIN = 0 or 10, VDD = 10; TA = 25°C | min -1.3 · typ -2.6 mA | 8 |
| Output high (source) current IOHmin | VO = 9.5, VIN = 0 or 10, VDD = 10; TA = 85°C | min -1.1 mA | 8 |
| Output high (source) current IOHmin | VO = 9.5, VIN = 0 or 10, VDD = 10; TA = 125°C | min -0.9 mA | 8 |
| Output high (source) current IOHmin | VO = 13.5, VIN = 0 or 15, VDD = 15; TA = –55°C | min -4.2 mA | 8 |
| Output high (source) current IOHmin | VO = 13.5, VIN = 0 or 15, VDD = 15; TA = –40°C | min -4 mA | 8 |
| Output high (source) current IOHmin | VO = 13.5, VIN = 0 or 15, VDD = 15; TA = 25°C | min -3.4 · typ -6.8 mA | 8 |
| Output high (source) current IOHmin | VO = 13.5, VIN = 0 or 15, VDD = 15; TA = 85°C | min -2.8 mA | 8 |
| Output high (source) current IOHmin | VO = 13.5, VIN = 0 or 15, VDD = 15; TA = 125°C | min -2.4 mA | 8 |
| Low-level output voltage VOLmax | VIN = 5, VDD = 5; TA = –55°C, –40°C, 25°C, 85°C, and 125°C | typ 0 · max 0.05 V | 8 |
| Low-level output voltage VOLmax | VIN = 10, VDD = 10; TA = –55°C, –40°C, 25°C, 85°C, and 125°C | typ 0 · max 0.05 V | 8 |
| Low-level output voltage VOLmax | VIN = 15, VDD = 15; TA = –55°C, –40°C, 25°C, 85°C, and 125°C | typ 0 · max 0.05 V | 8 |
| High-level output voltage VOHmin | VIN = 0, VDD = 5; TA = –55°C, –40°C, 25°C, 85°C, and 125°C | min 4.95 · typ 5 V | 8 |
| High-level output voltage VOHmin | VIN = 0, VDD = 10; TA = –55°C, –40°C, 25°C, 85°C, and 125°C | min 9.95 · typ 10 V | 8 |
| High-level output voltage VOHmin | VIN = 0, VDD = 15; TA = –55°C, –40°C, 25°C, 85°C, and 125°C | min 14.95 · typ 15 V | 8 |
| Input current IINmax | VIN = 0 or 18, VDD = 18; TA = –55°C; maximum magnitude, ±0.1 uA | max 0.1 uA | 8 |
| Input current IINmax | VIN = 0 or 18, VDD = 18; TA = –40°C; maximum magnitude, ±0.1 uA | max 0.1 uA | 8 |
| Input current IINmax | VIN = 0 or 18, VDD = 18; TA = 25°C; magnitudes, typical ±0.00001 uA and maximum ±0.1 uA | typ 0.00001 · max 0.1 uA | 8 |
| Input current IINmax | VIN = 0 or 18, VDD = 18; TA = 85°C; maximum magnitude, ±1 uA | max 1 uA | 8 |
| Input current IINmax | VIN = 0 or 18, VDD = 18; TA = 125°C; maximum magnitude, ±1 uA | max 1 uA | 8 |
| Propagation delay time tPHL, tPLH | VDD = 5; TA = 25°C, input tr, tf = 20 ns, CL = 50 pF, RL = 200 kΩ | typ 140 · max 280 ns | 8 |
| Propagation delay time tPHL, tPLH | VDD = 10; TA = 25°C, input tr, tf = 20 ns, CL = 50 pF, RL = 200 kΩ | typ 70 · max 140 ns | 8 |
| Propagation delay time tPHL, tPLH | VDD = 15; TA = 25°C, input tr, tf = 20 ns, CL = 50 pF, RL = 200 kΩ | typ 60 · max 120 ns | 8 |
| Transition time tTHL, tTLH | VDD = 5; TA = 25°C, input tr, tf = 20 ns, CL = 50 pF, RL = 200 kΩ | typ 100 · max 200 ns | 8 |
| Transition time tTHL, tTLH | VDD = 10; TA = 25°C, input tr, tf = 20 ns, CL = 50 pF, RL = 200 kΩ | typ 50 · max 100 ns | 8 |
| Transition time tTHL, tTLH | VDD = 15; TA = 25°C, input tr, tf = 20 ns, CL = 50 pF, RL = 200 kΩ | typ 40 · max 80 ns | 8 |
| Input capacitance CIN | Any input; TA = 25°C, input tr, tf = 20 ns, CL = 50 pF, RL = 200 kΩ | typ 5 · max 7.5 pF | 8 |
Pins, by the datasheet
14- 1 A
- Channel A input · p. 3
- 2 G=A
- Channel A inverted output · p. 3
- 3 B
- Channel B input · p. 3
- 4 H=B
- Channel B inverted output · p. 3
- 5 C
- Channel C input · p. 3
- 6 I=C
- Channel C inverted output · p. 3
- 7 VSS
- Ground · p. 3
- 8 J=D
- Channel D inverted output · p. 3
- 9 D
- Channel D input · p. 3
- 10 K=E
- Channel E inverted output · p. 3
- 11 E
- Channel E input · p. 3
- 12 L=F
- Channel F inverted output · p. 3
- 13 F
- Channel F input · p. 3
- 14 VDD
- Power supply · p. 3
Ordering codes, by the datasheet
2- CD40106BPW
- TSSOP (PW), 14 pins · Package quantity 90; operating temperature –55°C to 125°C · p. 19
- CD40106BPWR
- TSSOP (PW), 14 pins · Package quantity 2000; operating temperature –55°C to 125°C · p. 19
Parts like it
8MC14106BDT
TSSOP-14-55℃~+125℃ 1 1uA 3.6V~10.8V 3V~18V 4000B Series 6 8.8mA 8.8mA 80ns@15V,50pF 900mV~4V Schmitt trigger TSSOP-14 Inverters ROHSonsemiInvertersNLV14069UBDT
TSSOP-14-55℃~+125℃ 1 1V~2.5V 1uA 3V~18V 4.95V 4000B Series 4V~12.5V 55ns@15V,50pF 6 8.8mA 8.8mA TSSOP-14 Inverters ROHSonsemiInvertersNLV14106BDT
TSSOP-14-55℃~+125℃ 1 1uA 3.6V~10.8V 3V~18V 6 8.8mA 8.8mA 80ns@15V,50pF 900mV~4V Schmitt trigger 噪声抑制功能 TSSOP-14 Inverters ROHSonsemiInvertersNLV14584BDT
TSSOP-14-55℃~+125℃ 1.6V~4.6V 1uA 3.4V~10.5V 3V~18V 6 8.8mA 8.8mA 80ns@15V,50pF Noise suppression function Schmitt trigger TSSOP-14 Inverters ROHSonsemiInvertersSN74LVC14APW
TSSOP-14-40℃~+125℃ 1 1.3V~2V 1.65V~3.6V 150mV~800mV 1uA 2.4V 24mA 24mA 550mV 6 6.2ns@3.3V,50pF 74LVC Schmitt trigger 电源关断保护、噪声抑制功能 TSSOP-14 Inverters ROHSTexas InstrumentsInverters74HC14PW
TSSOP-14-40℃~+125℃ 1 1.5V~4.2V 21ns@6V,50pF 2V~6V 2uA 3.7V 400mV 5.2mA 5.2mA 6 74HC Schmitt trigger TSSOP-14 Inverters ROHSNexperiaInverters74HC04PW
TSSOP-14-40℃~+125℃ 1 1.5V~4.2V 14ns@6V,50pF 2V~6V 2uA 3.7V 400mV 5.2mA 5.2mA 500mV~1.8V 6 74HC TSSOP-14 Inverters ROHSNexperiaInvertersSN74HC14PW
TSSOP-14-40℃~+85℃ 1 1.5V~4.2V 21ns@6V,50pF 2V~6V 2uA 300mV~1.2V 5.2mA 5.2mA 6 74HC Schmitt trigger 噪声抑制功能 TSSOP-14 Inverters ROHSTexas InstrumentsInverters
Questions
Is there a KiCad symbol and footprint for the CD40106BPW?
Yes. The symbol is 4xxx:40106 and the footprint Package_SO:TSSOP-14_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CD40106BPW?
TSSOP-14, with 14 pins. Its footprint is drawn on this page.
Where is the CD40106BPW datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the CD40106BPW?
JLCPCB lists it as part C58834, with 12,205 in stock; the sellers' links on this page open their listings.
What can replace the CD40106BPW?
Parts like it in the library: the MC14106BDT by onsemi, the NLV14069UBDT by onsemi, the NLV14106BDT by onsemi and the NLV14584BDT by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.