
SmartCard
dac63701/SmartCard
The goal of this project was to create a small and slim Bluetooth tracker that would fit into a credit card enclosure. To do this, a 0.8mm thin 80mah battery was used along with a 0.8mm PCB.
Texas InstrumentsExtended
0℃~+125℃ 1 250mA 4.2V 4.45V~6.45V 6uA Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Under-voltage lockout、Overcurrent Protection、Short-Circuit Protection、Overvoltage protection Lithium Battery Support Support DSBGA-6 Battery Management ROHS
The BQ25100YFPR is a battery Management made by Texas Instruments in a DSBGA-6 package with 6 pins. 0℃~+125℃ 1 250mA 4.2V 4.45V~6.45V 6uA Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Under-voltage lockout、Overcurrent Protection、Short-Circuit Protection、Overvoltage protection Lithium Battery Support Support DSBGA-6 Battery Management ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:BQ25100AYFPR, from EasyEDA) and its footprint (EasyEDA_Cloud:WLCSP-6_L1.2-W1.0-R3-C2-P0.40-TL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C527572). 5 open-source boards in 4 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| A1 | OUT | Unspecified |
| A2 | IN | Unspecified |
| B1 | TS | Unspecified |
| B2 | ISET | Unspecified |
| C1 | PRE-TERM | Unspecified |
| C2 | VSS | Unspecified |

dac63701/SmartCard
The goal of this project was to create a small and slim Bluetooth tracker that would fit into a credit card enclosure. To do this, a 0.8mm thin 80mah battery was used along with a 0.8mm PCB.

uguryildirim24/elicio
Unfinished ear-muscle EMG earpiece research with KiCad board designs, parametric shell CAD, firmware, synthetic transport fixtures and an audited gesture-to-action gate.

jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.

schmidtmt/openmotorbridge
The comprehensive technical specification is split into 18 logically organized chapters:

uguryildirim24/elicio
Unfinished ear-muscle EMG earpiece research with KiCad board designs, parametric shell CAD, firmware, synthetic transport fixtures and an audited gesture-to-action gate.
Yes. The symbol is EasyEDA_Cloud:BQ25100AYFPR and the footprint EasyEDA_Cloud:WLCSP-6_L1.2-W1.0-R3-C2-P0.40-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.
DSBGA-6, with 6 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C527572, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the BQ25101YFPR by Texas Instruments, the BQ25100AYFPR by Texas Instruments, the BQ25101YFPT by Texas Instruments and the BQ25100BYFPR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.