Skip to the content
12345678910111213141516

AMC3330DWE

Texas InstrumentsExtended

-40℃~+125℃ 2 2.5nA 375kHz 4250 50uV 85kV/us Differential Isolated ΔΣ (Sigma-Delta) modulator、Fault detection、Full-differential topology、Single-supply isolation、Integrated isolated power supply SOIC-16 Isolation Amplifiers ROHS

Part id
ti/AMC3330DWE
Category
Isolation Amplifiers
Package
SOIC-16
Pins
16
In stock
0 at JLCPCB (C4990159)
Used on
13 open-source boards

Overview

The AMC3330DWE is an isolation Amplifier made by Texas Instruments in a SOIC-16 package with 16 pins. -40℃~+125℃ 2 2.5nA 375kHz 4250 50uV 85kV/us Differential Isolated ΔΣ (Sigma-Delta) modulator、Fault detection、Full-differential topology、Single-supply isolation、Integrated isolated power supply SOIC-16 Isolation Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Isolator_Analog:AMC3330, from KiCad's library) and its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C4990159). 13 open-source boards in 8 repositories on GitHub use it.

Symbol

1DCDC_OUT2DCDC_HGND3HLDO_IN5HLDO_OUT6INP7INN8HGND9GND10OUTN11OUTP12VDD13LDO_OUT14DIAG15DCDC_GND16DCDC_IN
Isolator_Analog:AMC3330From KiCad's library

Footprint

12345678910111213141516
Package_SO:SOIC-16_3.9x9.9mm_P1.27mmFrom KiCad's library

Pinout

16
The pins of the AMC3330DWE
PinNameType
1DCDC_OUTPower out
2DCDC_HGNDPower out
3HLDO_INPower in
4NCNot connected
5HLDO_OUTPower out
6INPInput
7INNInput
8HGNDPower in
9GNDPower in
10OUTNOutput
11OUTPOutput
12VDDPower in
13LDO_OUTPower out
14DIAGOutput
15DCDC_GNDPower in
16DCDC_INPower in

Open-source boards using it

13See all 13
  • 4 layers154.2 × 106.2 mmPS LVCarrier, the printed circuit board in 3D

    PS LVCarrier

    lhr-solar/PS-LVCarrierPCB

    One Big Beautiful Board

    420 parts2MIT
  • 4 layers60 × 100 mmPVBatteryInverter Mainboard, the printed circuit board in 3D

    PVBatteryInverter Mainboard

    Philip-Kiehnle/PVBatteryInverter

    High efficient PV charging of HV-Battery with 650V-GaN power stage. A second GaN-power stage is used as a Single-Phase inverter, which enables high efficient self-consumption.

    157 parts1MIT
  • 4 layers175.3 × 76.1 mmMyProject, the printed circuit board in 3D

    MyProject

    Hakman482/fpga-power-quality-monitor

    A complete hardware–FPGA–software prototype for real-time single-phase power-quality measurement, developed as an MSc Electronic & Electrical Engineering project.

    118 parts
  • 4 layers24 × 24 mmINV PhaseVsense, the printed circuit board in 3D

    INV PhaseVsense

    NTURacingTeam/nturt_kicad

    kicad files

    16 parts4
  • 4 layers66 × 37.1 mmDualAMCBoard, the printed circuit board in 3D

    DualAMCBoard

    oihdesigns/Micro-DMM

    A small, open hardware DMM

    59 parts2
  • 2 layers60 × 35 mmBus sensor, the printed circuit board in 3D

    Bus sensor

    BennetLeff/temper

    a breville control freak ++

    24 parts1

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the AMC3330DWE?

Yes. The symbol is Isolator_Analog:AMC3330 and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AMC3330DWE?

SOIC-16, with 16 pins. Its footprint is drawn on this page.

Where is the AMC3330DWE datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the AMC3330DWE?

JLCPCB lists it as part C4990159, with 0 in stock; the sellers' links on this page open their listings.

What can replace the AMC3330DWE?

Parts like it in the library: the AMC3330DWER by Texas Instruments, the AMC3301DWER by Texas Instruments, the AMC3302DWER by Texas Instruments and the AMC3302DWE by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AMC3330DWE?

13 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.