ADS8881IDGS
Texas Instruments
-40℃~+85℃ 1 1.5LSB 100dB 18 1MHz 2.7V~3.6V Bipolar input、Multi-chip synchronization、Synchronous triggering Built-in External Not supported SAR SPI Yes VSSOP-10 Analog to Digital Converters (ADC) ROHS
- Category
- Analog To Digital Converters (ADC)
- Package
- VSSOP-10
- Pins
- 10
Overview
The ADS8881IDGS is an analog To Digital Converter made by Texas Instruments in a VSSOP-10 package with 10 pins. -40℃~+85℃ 1 1.5LSB 100dB 18 1MHz 2.7V~3.6V Bipolar input、Multi-chip synchronization、Synchronous triggering Built-in External Not supported SAR SPI Yes VSSOP-10 Analog to Digital Converters (ADC) ROHS.
PCBKit's library has its KiCad symbol (Analog & Interface:ADS8881, from CERN's library) and its footprint (ICs And Semiconductors SMD:SOP50P490X110-10N, from CERN's library), ready for a KiCad board. JLCPCB lists it (part C701107).
Symbol
Footprint
Parameters
14- ADC architecture
- SAR
- Clock/Oscillator
- Built-in
- Features
- Bipolar input, Multi-chip synchronization, Synchronous triggering
- Integral non - linearity
- 1.5LSB
- Interface
- SPI
- Operating Temperature
- -40℃~+85℃
- Programmable Gain
- Not supported
- Resolution (Bits)
- 18
- Sampling Rate
- 1MHz
- Signal-to-Noise Ratio
- 100dB
- Voltage - Supply
- 2.7V~3.6V
- Voltage Reference
- External
- differential input
- Yes
- number of channels
- 1
Order codes
1- ADS8881IDGSLCSC C701107
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | REF_ | Passive |
| 2 | AVDD | Power in |
| 3 | AINP | Input |
| 4 | AINN | Input |
| 5 | GND | Power in |
| 6 | CONVST | Input |
| 7 | DOUT | Output |
| 8 | SCLK | Input |
| 9 | DIN_ | Input |
| 10 | DVDD | Power in |
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/ti/ADS8881IDGS" title="ADS8881IDGS in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/ti/ADS8881IDGS.jpg" alt="ADS8881IDGS" width="1200" height="900">[](https://pcbkit.io/parts/ti/ADS8881IDGS)Questions
Is there a KiCad symbol and footprint for the ADS8881IDGS?
Yes. The symbol is Analog & Interface:ADS8881 and the footprint ICs And Semiconductors SMD:SOP50P490X110-10N, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADS8881IDGS?
VSSOP-10, with 10 pins. Its footprint is drawn on this page.
Where is the ADS8881IDGS datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the ADS8881IDGS?
JLCPCB lists it as part C701107, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ADS8881IDGS?
Parts like it in the library: the ADS1115BQDGSRQ1 by Texas Instruments and the ADS8866IDGS by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Parts like it
2
ADS1115BQDGSRQ1
VSSOP-10-0.5mm-40℃~+125℃ 16 1LSB 1MHz 2 2V~5.5V 500nA 5ppm/℃ 6.144V 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS8866IDGS
VSSOP-10-0.5mm-40℃~+85℃ 1 1.65V~3.6V、2.7V~3.6V 100kHz 16 16MHz~66.6MHz 2LSB 50nA 93dB External No SAR SPI VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)