2 layers221.8 × 78 mm
ADS7960SDB
Texas InstrumentsExtended
-40℃~+125℃ 0.5LSB 12 1MHz 2.7V~5.25V 8 Multiplexers SPI TSSOP-38-4.4mm Analog to Digital Converters (ADC) ROHS
- Part id
- ti/ADS7960SDB
- Category
- Uncategorised
- Package
- TSSOP-38-4.4mm
- Pins
- 38
- In stock
- 0 at JLCPCB (C1543353)
- Used on
- 1 open-source board
Overview
The ADS7960SDB is an uncategorised made by Texas Instruments in a TSSOP-38-4.4mm package with 38 pins. -40℃~+125℃ 0.5LSB 12 1MHz 2.7V~5.25V 8 Multiplexers SPI TSSOP-38-4.4mm Analog to Digital Converters (ADC) ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADS7952SBDBTR, from EasyEDA) and its footprint (Package_SO:TSSOP-38_4.4x9.7mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1543353). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
38| Pin | Name | Type |
|---|---|---|
| 1 | GPIO2 | Unspecified |
| 2 | GPIO3 | Unspecified |
| 3 | REFM | Unspecified |
| 4 | REFP | Unspecified |
| 5 | +VA | Unspecified |
| 6 | AGND | Unspecified |
| 7 | MXO | Unspecified |
| 8 | AINP | Unspecified |
| 9 | AINM | Unspecified |
| 10 | AGND | Unspecified |
| 11 | NC | Unspecified |
| 12 | NC | Unspecified |
| 13 | NC | Unspecified |
| 14 | NC | Unspecified |
| 15 | CH11 | Unspecified |
| 16 | CH10 | Unspecified |
| 17 | CH9 | Unspecified |
| 18 | CH8 | Unspecified |
| 19 | AGND | Unspecified |
| 20 | AGND | Unspecified |
| 21 | CH7 | Unspecified |
| 22 | CH6 | Unspecified |
| 23 | CH5 | Unspecified |
| 24 | CH4 | Unspecified |
| 25 | CH3 | Unspecified |
| 26 | CH2 | Unspecified |
| 27 | CH1 | Unspecified |
| 28 | CH0 | Unspecified |
| 29 | +VA | Unspecified |
| 30 | AGND | Unspecified |
| 31 | CS# | Unspecified |
| 32 | SCLK | Unspecified |
| 33 | SDI | Unspecified |
| 34 | SDO | Unspecified |
| 35 | BDGND | Unspecified |
| 36 | +VBD | Unspecified |
| 37 | GPIO0 | Unspecified |
| 38 | GPIO1 | Unspecified |
Open-source boards using it
1Parts like it
8
ADS7953SBDB
TSSOP-38-4.4mm-40℃~+125℃ 0.5LSB 12 16 1MHz 2.7V~5.25V 20MHz 3mA 71.7dB Multiplexers No SAR Serial port TSSOP-38-4.4mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsUncategorisedADS8688AIDBTR
TSSOP-38-4.4mm-40℃~+125℃ 0.75LSB 16 17MHz 4.75V~5.25V 500kHz 8 92dB Built-in Multiplexers、Bipolar input No SAR SPI Support TSSOP-38-4.4mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsUncategorisedADS8688WDBTR
-- Analog to Digital Converters (ADC) ROHSTexas InstrumentsUncategorisedAD5348BRU
TSSOP382.5 V to 5.5 V, Parallel Interface Octal Voltage Output 12-Bit DACAnalog DevicesUncategorisedAD5547BRU
TSSOP38Dual-Current Output, Parallel Input, 16-Bit Multiplying DAC with 4-Quadrant ResistorsAnalog DevicesUncategorisedAD5547CRU
TSSOP38Dual-Current Output, Parallel Input, 16-Bit Multiplying DAC with 4-Quadrant ResistorsAnalog DevicesUncategorisedADG3247BRU
TSSOP382.5V/3.3V, 16-Bit, 2-Port Level Translating, Bus SwitchAnalog DevicesUncategorisedMAX11040KGUU
TSSOP3824-Bit, 4-Channel, Simultaneous-Sampling, Cascadable, Sigma-Delta ADCMaxim Integrated (Analog Devices)Uncategorised
Questions
Is there a KiCad symbol and footprint for the ADS7960SDB?
Yes. The symbol is EasyEDA_Cloud:ADS7952SBDBTR and the footprint Package_SO:TSSOP-38_4.4x9.7mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADS7960SDB?
TSSOP-38-4.4mm, with 38 pins. Its footprint is drawn on this page.
Where is the ADS7960SDB datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the ADS7960SDB?
JLCPCB lists it as part C1543353, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ADS7960SDB?
Parts like it in the library: the ADS7953SBDB by Texas Instruments, the ADS8688AIDBTR by Texas Instruments, the ADS8688WDBTR by Texas Instruments and the AD5348BRU by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ADS7960SDB?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.