Overview
The ADS7253IRTE is an analog To Digital Converter made by Texas Instruments in a WQFN-16-EP(3x3) package with 17 pins. -40℃~+125℃ 12 1LSB 1MHz 2 2.5mA 3.3V、5V 73dB Built-in SPI、Serial port Simultaneous sampling WQFN-16-EP(3x3) Analog to Digital Converters (ADC) ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADS7253IRTET, from EasyEDA) and its footprint (EasyEDA_Cloud:WQFN-16_L3.0-W3.0-P0.50-BL-EP0.8, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C2670987).
Symbol
Footprint
Parameters
15- Clock/Oscillator
- External
- DNL (LSB)
- 0.3LSB
- Features
- Simultaneous sampling
- Integral non - linearity
- 1LSB
- Interface
- SPI；Serial port
- Operating Temperature
- -40℃~+125℃
- Programmable Gain
- Not supported
- Quiescent Current (Iq)
- 2.5mA
- Resolution (Bits)
- 12
- Sampling Rate
- 1MHz
- Signal-to-Noise Ratio
- 73dB
- Voltage - Supply
- 5V；3.3V
- Voltage Reference
- Built-in
- differential input
- Yes
- number of channels
- 2
Order codes
2- ADS7253IRTERLCSC C2670987
- ADS7253IRTETLCSC C2866775
Pinout
17| Pin | Name | Type |
|---|---|---|
| 1 | REFIO_A | Unspecified |
| 2 | REFGND_A | Unspecified |
| 3 | REFGND_B | Unspecified |
| 4 | REFIO_B | Unspecified |
| 5 | AINM_B | Unspecified |
| 6 | AINP_B | Unspecified |
| 7 | DVDD | Unspecified |
| 8 | SDI | Unspecified |
| 9 | CS# | Unspecified |
| 10 | SCLK | Unspecified |
| 11 | SDO_A | Unspecified |
| 12 | SDO_B | Unspecified |
| 13 | GND | Unspecified |
| 14 | AVDD | Unspecified |
| 15 | AINP_A | Unspecified |
| 16 | AINM_A | Unspecified |
| 17 | EP | Unspecified |
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/ti/ADS7253IRTE" title="ADS7253IRTE in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/ti/ADS7253IRTE.jpg" alt="ADS7253IRTE" width="1200" height="900">[](https://pcbkit.io/parts/ti/ADS7253IRTE)Questions
Is there a KiCad symbol and footprint for the ADS7253IRTE?
Yes. The symbol is EasyEDA_Cloud:ADS7253IRTET and the footprint EasyEDA_Cloud:WQFN-16_L3.0-W3.0-P0.50-BL-EP0.8, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADS7253IRTE?
WQFN-16-EP(3x3), with 17 pins. Its footprint is drawn on this page.
Where is the ADS7253IRTE datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the ADS7253IRTE?
JLCPCB lists it as part C2670987, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ADS7253IRTE?
Parts like it in the library: the ADS8350IRTE by Texas Instruments, the ADS8353IRTE by Texas Instruments, the ADS1119IRTE by Texas Instruments and the ADS8355IRTE by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Parts like it
5
ADS8350IRTE
WQFN-16-EP(3x3)-40℃~+125℃ 16 1LSB 2 24MHz 4.5V~5.5V 5mA 750kHz 85dB External SAR SPI Yes WQFN-16-EP(3x3) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS8353IRTE
WQFN-16-EP(3x3)-40℃~+125℃ 16 2 2.5LSB 4.75V~5.25V 50uA 600kHz 89dB External、Built-in No SPI、Serial port Simultaneous sampling WQFN-16-EP(3x3) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS1119IRTE
WQFN-16-EP(3x3)-40℃~+125℃ 1.024MHz 15LSB 16 1kHz 2 2.3V~5.5V 300nA Built-in Built-in I2C Multiplexers、Power-on reset、Integrated modulator、Built-in digital filter Sigma-Delta Support Yes WQFN-16-EP(3x3) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS8355IRTE
WQFN-16-EP(3x3)-40℃~+125℃ 16 1LSB 1MHz 2 4.5V~5.5V 50uA 88dB External、Built-in SPI Yes WQFN-16-EP(3x3) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)ADS7850IRTE
WQFN-16-EP(3x3)-40℃~+125℃ 1.5LSB 14 2 4.5V~5.5V 750kHz SPI WQFN-16-EP(3x3) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)