
Senzori iradiere
cs-pub-ro/smart-solar-irradiance-sensor
Open-source hardware & software for a smart wireless sensor that measures solar irradiance.
Texas InstrumentsExtended
-40℃~+125℃ 0.4MHz~25MHz、16.384MHz~16.5MHz 0.5ppm/℃ 111dB 128kHz 128kHz 2.442V 20ppm/℃ 24 3V~5.5V SPI TQFP-32(5x5) Analog Front End (AFE) ROHS
The ADS131A04IPBS is an analog Front End made by Texas Instruments in a TQFP-32(5x5) package with 32 pins. -40℃~+125℃ 0.4MHz~25MHz、16.384MHz~16.5MHz 0.5ppm/℃ 111dB 128kHz 128kHz 2.442V 20ppm/℃ 24 3V~5.5V SPI TQFP-32(5x5) Analog Front End (AFE) ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADS131A04IPBS, from EasyEDA) and its footprint (Package_QFP:TQFP-32_5x5mm_P0.5mm, from KiCad's library), ready for a KiCad board. 223 are in stock at JLCPCB (part C2861481). 3 open-source boards in 3 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | AIN1N | Unspecified |
| 2 | AIN1P | Unspecified |
| 3 | AIN2N | Unspecified |
| 4 | AIN2P | Unspecified |
| 5 | AIN3N | Unspecified |
| 6 | AIN3P | Unspecified |
| 7 | AIN4N | Unspecified |
| 8 | AIN4P | Unspecified |
| 9 | AVDD | Unspecified |
| 10 | AVSS | Unspecified |
| 11 | VNCP | Unspecified |
| 12 | REFP | Unspecified |
| 13 | REFN | Unspecified |
| 14 | REFEXT | Unspecified |
| 15 | IOVDD | Unspecified |
| 16 | RESV | Unspecified |
| 17 | RESET# | Unspecified |
| 18 | DONE# | Unspecified |
| 19 | DRDY# | Unspecified |
| 20 | DIN | Unspecified |
| 21 | DOUT | Unspecified |
| 22 | SCLK | Unspecified |
| 23 | CS# | Unspecified |
| 24 | NC | Unspecified |
| 25 | XTAL1/CLKIN | Unspecified |
| 26 | XTAL2 | Unspecified |
| 27 | GND | Unspecified |
| 28 | CAP | Unspecified |
| 29 | IOVDD | Unspecified |
| 30 | M0 | Unspecified |
| 31 | M1 | Unspecified |
| 32 | M2 | Unspecified |

cs-pub-ro/smart-solar-irradiance-sensor
Open-source hardware & software for a smart wireless sensor that measures solar irradiance.

Gady159/Gadas_MSE_ELoad
Master's thesis project by Jan Gadas: STM32 firmware, Nextion HMI and KiCad hardware design files for a modular high-power electronic load.

Yes. The symbol is EasyEDA_Cloud:ADS131A04IPBS and the footprint Package_QFP:TQFP-32_5x5mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
TQFP-32(5x5), with 32 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2861481, with 223 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the ADS131A02IPBSR by Texas Instruments, the ADS131A04IPBSR by Texas Instruments, the ADS1292RIPBSR by Texas Instruments and the ADS1292IPBS by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.