2 layers139.7 × 41.9 mm
Kstat mainboard
nfroehberg/GlazerLab_KStat
Firmware, PCB design and Python interface for the KStat potentiostat developed in the Glazer Lab, University of Hawaii.
121 parts
ADS1255
Texas Instruments
- Part id
- ti/ADS1255
- Category
- Uncategorised
- Pins
- 20
- Used on
- 2 open-source boards
Overview
The ADS1255 is an uncategorised made by Texas Instruments with 20 pins.
PCBKit's library has its KiCad symbol (Celestial_ADC:TI ADS1255, from Altium's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
The library has no footprint for this part yet.
Pinout
20| Pin | Name | Type |
|---|---|---|
| 1 | AVDD | Passive |
| 2 | AGND | Passive |
| 3 | VREFN | Passive |
| 4 | VREFP | Passive |
| 5 | AINCOM | Passive |
| 6 | AIN0 | Passive |
| 7 | AIN1 | Passive |
| 8 | SYNC/PDWN | Passive |
| 9 | RESET | Passive |
| 10 | DVDD | Passive |
| 11 | DGND | Passive |
| 12 | XTAL2 | Passive |
| 13 | XTAL1/CLKIN | Passive |
| 14 | CS | Passive |
| 15 | DRDY | Passive |
| 16 | DOUT | Passive |
| 17 | DIN | Passive |
| 18 | SCLK | Passive |
| 19 | D0/CLKOUT | Passive |
| 20 | D1 | Passive |
Open-source boards using it
2- 4 layers85 × 52 mm
Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
24 parts
Questions
Is there a KiCad symbol and footprint for the ADS1255?
Yes. The symbol is Celestial_ADC:TI ADS1255, both drawn on this page. PCBKit places them on a board for you when you design with it.
Which open-source boards use the ADS1255?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.