Skip to the content
3333333333

ADS124S08IRHB

Texas InstrumentsExtended

-50℃~+125℃ 1.5uA 12 2.7V~5.25V 24 4.096MHz 4kHz Auto calibration、Built-in temperature sensor、Multiplexers、Power-on reset、Bipolar power supply Built-in Built-in SPI Sigma-Delta Support Yes VQFN-32-EP(5x5) Analog to Digital Converters (ADC) ROHS

Part id
ti/ADS124S08IRHB
Category
Analog To Digital Converters (ADCs)
Package
VQFN-32-EP(5x5)
Pins
37
In stock
15 at JLCPCB (C2655452)

Overview

The ADS124S08IRHB is an analog To Digital Converter made by Texas Instruments in a VQFN-32-EP(5x5) package with 33 pins. -50℃~+125℃ 1.5uA 12 2.7V~5.25V 24 4.096MHz 4kHz Auto calibration、Built-in temperature sensor、Multiplexers、Power-on reset、Bipolar power supply Built-in Built-in SPI Sigma-Delta Support Yes VQFN-32-EP(5x5) Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADS114S06IRHBT, from EasyEDA) and its footprint (EasyEDA_Cloud:VQFN-32_L5.0-W5.0-P0.50-TL-EP2.1, from EasyEDA), ready for a KiCad board. 15 are in stock at JLCPCB (part C2655452).

Symbol

1AINCOM2AIN53AIN44AIN35AIN26AIN17AIN08START/SYNC9CS#10DIN11SCLK12DOUT/DRDY#13DRDY#14DGND15IOVDD16DVDD17CLK18RESET#19GPIO3/AIN1120GPIO2/AIN1021GPIO1/AIN922GPIO0/AIN823REFOUT24REFCOM25NC26AVDD27AVSS28AVSS-SW29REFN030REFP031REFN1/AIN732REFP1/AIN633EP
EasyEDA_Cloud:ADS114S06IRHBTFrom EasyEDA

Footprint

3333333333
EasyEDA_Cloud:VQFN-32_L5.0-W5.0-P0.50-TL-EP2.1From EasyEDA

From the datasheet

17
Supply, least
2.7 V · AVDD to AVSS, recommended operating min · p. 8
Supply, most
5.25 V · AVDD to AVSS, recommended operating max · p. 8
Supply, least
2.625 V · AVSS to DGND, recommended operating min · p. 8
Supply, least
1.5 V · AVDD to DGND, recommended operating min · p. 8
Supply, most
3.6 V · DVDD to DGND, recommended operating max · p. 8
Supply, absolute maximum
5.5 V · AVDD to AVSS, absolute max · p. 7
Supply, absolute maximum
3.9 V · DVDD to DGND, absolute max · p. 7
Works from
-50 °C · Operating ambient temperature min · p. 8
Works up to
125 °C · Operating ambient temperature max · p. 8
Junction, hottest
150 °C · Junction temperature absolute max · p. 7
Takes working
345 µA · sum of AVDD, DVDD and IOVDD typical; conversion, PGA gain 1 or 2, external reference, internal oscillator, SPI inactive · p. 13
Takes asleep
200 nA · sum of AVDD, DVDD and IOVDD typical; power-down, internal oscillator · p. 13
A pin gives at most
10 mA · Continuous input current absolute max, pins except power supplies and AVSS-SW, REFN0, REFOUT; ±10 mA · p. 7
A pin gives at most
100 mA · Continuous input current absolute max, AVSS-SW, REFN0, REFOUT; ±100 mA · p. 7
Junction to air (VQFN (RHB))
45.2 K/W · Junction-to-ambient thermal resistance · p. 8
Junction to case (VQFN (RHB))
28.3 K/W · Junction-to-case (top) thermal resistance · p. 8
Junction to board (VQFN (RHB))
15.8 K/W · Junction-to-board thermal resistance · p. 8

What it is and has

14
Programmable gain
1 to 128 · p. 1
Programmable data rates
2.5 SPS to 4 kSPS · p. 1
Analog inputs
12 independently selectable inputs · p. 1
PGA noise
19 nVRMS at gain 128 · p. 1
Internal reference
2.5 V, 10 ppm/°C maximum drift · p. 1
Internal oscillator
4.096 MHz, 1.5% accuracy · p. 1
Temperature sensor
Internal · p. 1
Fault detection
Extended fault detection circuits · p. 1
Calibration
Self offset and system calibration · p. 1
GPIO
4 · p. 1
Serial interface
SPI-compatible with optional CRC · p. 1
ADC resolution and data rate
24-bit, up to 4 kSPS · p. 1
Conversion modes
Continuous conversion and single-shot conversion · p. 60
System monitor
Device temperature, analog supply, digital supply, and sensor malfunction detection · p. 52

Around it

3
res 10 MΩ
between selected REFPx and selected REFNx; Optional floating-reference detection resistor; continuous connection to active reference inputs is not recommended. · p. 54
res 3.5 kΩ
between AIN6 (REFP1) and AIN7 (REFN1); RREF in the 3-wire RTD example; use a precision resistor with low temperature drift. · p. 93
res 1 kΩ
between RLEAD3 and AVSS; RBIAS in the 3-wire RTD example; level shifts the RTD input voltage. · p. 93

Specifications

110
ParameterConditionsAs printedPage
Power-supply voltageAVDD to AVSSmin -0.3 · max 5.5 V7
Power-supply voltageAVSS to DGNDmin -2.8 · max 0.3 V7
Power-supply voltageDVDD to DGNDmin -0.3 · max 3.9 V7
Power-supply voltageIOVDD to DGNDmin -0.3 · max 5.5 V7
Input currentContinuous, AVSS-SW, REFN0, REFOUTmin -100 · max 100 mA7
Input currentContinuous, all other pins except power-supply pinsmin -10 · max 10 mA7
Temperature TJJunctionmax 150 °C7
Temperature TstgStoragemin -60 · max 150 °C7
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2500 Vmax 2500 V7
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1000 Vmax 1000 V7
Analog power supplyAVDD to AVSSmin 2.7 · max 5.25 V8
Analog power supplyAVSS to DGND; NOM = 0 Vmin -2.625 · typ 0 · max 0.05 V8
Analog power supplyAVDD to DGNDmin 1.5 · max 5.25 V8
Digital core power supplyDVDD to DGNDmin 2.7 · max 3.6 V8
Digital IO power supplyIOVDD to DGND; min DVDDmax 5.25 V8
Differential reference input voltage VREFVREF = V(REFPx) – V(REFNx); max AVDD – AVSSmin 0.5 V8
External clock frequency fCLKNOM = 4.096 MHzmin 2 · typ 4.096 · max 4.5 MHz8
Duty cycleExternal clock source; NOM = 50%min 40 · typ 50 · max 60 %8
Operating ambient temperature TAmin -50 · max 125 °C8
Junction-to-ambient thermal resistance RθJAVQFN (RHB), 32 PINStyp 45.2 °C/W8
Junction-to-case (top) thermal resistance RθJC(top)VQFN (RHB), 32 PINStyp 28.3 °C/W8
Junction-to-board thermal resistance RθJBVQFN (RHB), 32 PINStyp 15.8 °C/W8
Junction-to-top characterization parameter ψJTVQFN (RHB), 32 PINStyp 0.4 °C/W8
Junction-to-board characterization parameter ψJBVQFN (RHB), 32 PINStyp 15.7 °C/W8
Junction-to-case (bottom) thermal resistance RθJC(bot)VQFN (RHB), 32 PINStyp 2.3 °C/W8
Absolute input currentReference buffers disabled, external VREF = 2.5 V, REFP1/REFN1 inputsmin -6 · typ 4 · max 6 uA/V11
Absolute input currentReference buffers enabled, external VREF = 2.5 V, REFP1/REFN1 inputsmin -15 · typ 5 · max 15 nA11
Output voltage VREFInternal voltage referencetyp 2.5 V11
AccuracyInternal voltage reference; TA = 25°C, VQFN package; typical ±0.01%min -0.1 · typ 0.01 · max 0.1 %11
Temperature driftInternal voltage reference; TA = –40°C to +85°Ctyp 2.5 · max 8 ppm/°C11
Temperature driftInternal voltage reference; TA = –50°C to +125°Ctyp 3 · max 10 ppm/°C11
Output currentInternal voltage reference; AVDD = 2.7 V to 3.3 V, sink and sourcemin -5 · max 5 mA11
Output currentInternal voltage reference; AVDD = 3.3 V to 5.25 V, sink and sourcemin -10 · max 10 mA11
Short-circuit current limitInternal voltage reference; Sink and sourcetyp 70 · max 100 mA11
Power-supply rejection ratio PSRRInternal voltage reference; AVDD at dctyp 85 dB11
Startup timeInternal voltage reference; 1-uF capacitor on REFOUT, 0.001% settlingtyp 5.9 ms11
Capacitive load stabilityInternal voltage reference; Capacitor on REFOUTmin 1 · max 47 uF11
Reference noisef = 0.1 Hz to 10 Hz, 1-uF capacitor on REFOUTtyp 9 uVPP11
Frequency fCLKInternal oscillatortyp 4.096 MHz11
AccuracyInternal oscillatormin -1.5 · max 1.5 %11
Accuracy (each IDAC)TA = 25°C, 10 uA to 100 uA; typical ±0.7%min -5 · typ 0.7 · max 5 %11
Accuracy (each IDAC)TA = 25°C, 250 uA to 2 mA; typical ±0.5%min -3 · typ 0.5 · max 3 %11
Current mismatch between IDACsTA = 25°C, 10 uA to 100 uAtyp 0.15 · max 0.8 %11
Current mismatch between IDACsTA = 25°C, 250 uA to 750 uAtyp 0.1 · max 0.6 %11
Current mismatch between IDACsTA = 25°C, 1 mA to 2 mAtyp 0.07 · max 0.4 %11
Temperature drift (each IDAC)10 uA to 750 uAtyp 20 · max 120 ppm/°C11
Temperature drift (each IDAC)1 mA to 2 mAtyp 10 · max 80 ppm/°C11
Temperature drift matching between IDACs10 uA to 100 uAtyp 3 · max 25 ppm/°C11
Temperature drift matching between IDACs250 uA to 2 mAtyp 2 · max 15 ppm/°C11
Startup timeIDACs; With internal reference already settled. From end of WREG command to current flowing out of pin.typ 22 us11
Output impedanceBias voltagetyp 350 Ω12
Startup timeBias voltage; Combined capacitive load on all selected analog inputs CLOAD = 1 uF, 0.1% settlingtyp 2.8 ms12
AccuracyBOCs; 0.2 uA, sinking or sourcing; typical ±8%typ 8 %12
AccuracyBOCs; 1 uA, sinking or sourcing; typical ±4%typ 4 %12
AccuracyBOCs; 10 uA, sinking or sourcing; typical ±2%typ 2 %12
Threshold 1Reference detectiontyp 0.3 V12
Threshold 2 accuracyReference detection; typical ±1%min -3 · typ 1 · max 3 %12
Pull-together resistanceReference detectiontyp 10 MΩ12
AccuracySupply voltage monitors; (AVDD – AVSS) / 4 monitor; typical ±1%typ 1 %12
AccuracySupply voltage monitors; DVDD / 4 monitor; typical ±1%typ 1 %12
Output voltageTemperature sensor; TA = 25°Ctyp 129 mV12
Temperature coefficientTemperature sensortyp 403 uV/°C12
On-resistance RONLow-side power switchtyp 1 · max 3 Ω12
Current through switchLow-side power switchmax 75 mA12
Input currentDigital inputs/outputs; DGND ≤ VDigital Input ≤ IOVDDmin -1 · max 1 uA12
Analog supply current IAVDDAVDD = 3.3 V, external reference, internal reference disabled, reference buffers disabled, IDACs disabled, VBIAS disabled, flags disabled, internal oscillator, all data rates, VIN = 0 V; Power-down modetyp 0.1 · max 1.5 uA13
Analog supply current IAVDDAVDD = 3.3 V, external reference, internal reference disabled, reference buffers disabled, IDACs disabled, VBIAS disabled, flags disabled, internal oscillator, all data rates, VIN = 0 V; Standby mode, PGA bypassedtyp 70 uA13
Analog supply current IAVDDAVDD = 3.3 V, external reference, internal reference disabled, reference buffers disabled, IDACs disabled, VBIAS disabled, flags disabled, internal oscillator, all data rates, VIN = 0 V; Conversion mode, PGA bypassedtyp 85 uA13
Analog supply current IAVDDAVDD = 3.3 V, external reference, internal reference disabled, reference buffers disabled, IDACs disabled, VBIAS disabled, flags disabled, internal oscillator, all data rates, VIN = 0 V; Conversion mode, PGA enabled, gain = 1, 2typ 120 · max 135 uA13
Analog supply current IAVDDAVDD = 3.3 V, external reference, internal reference disabled, reference buffers disabled, IDACs disabled, VBIAS disabled, flags disabled, internal oscillator, all data rates, VIN = 0 V; Conversion mode, PGA enabled, gain = 16, 32typ 165 · max 180 uA13
Analog supply current IAVDDAVDD = 3.3 V, external reference, internal reference disabled, reference buffers disabled, IDACs disabled, VBIAS disabled, flags disabled, internal oscillator, all data rates, VIN = 0 V; Conversion mode, PGA enabled, gain = 64typ 200 uA13
Analog supply current IAVDDAVDD = 3.3 V, external reference, internal reference disabled, reference buffers disabled, IDACs disabled, VBIAS disabled, flags disabled, internal oscillator, all data rates, VIN = 0 V; Conversion mode, PGA enabled, gain = 128typ 250 uA13
Analog supply current IAVDDAdditional analog supply current per function, AVDD = 3.3 V; Internal 2.5-V reference, no external loadtyp 185 · max 280 uA13
Analog supply current IAVDDAdditional analog supply current per function, AVDD = 3.3 V; Positive reference buffertyp 35 · max 60 uA13
Analog supply current IAVDDAdditional analog supply current per function, AVDD = 3.3 V; Negative reference buffertyp 25 · max 40 uA13
Analog supply current IAVDDAdditional analog supply current per function, AVDD = 3.3 V; VBIAS buffer, no external loadtyp 10 uA13
Analog supply current IAVDDAdditional analog supply current per function, AVDD = 3.3 V; IDAC overhead, 10 uA to 250 uAtyp 20 · max 35 uA13
Analog supply current IAVDDAdditional analog supply current per function, AVDD = 3.3 V; IDAC overhead, 500 uA to 750 uAtyp 30 uA13
Analog supply current IAVDDAdditional analog supply current per function, AVDD = 3.3 V; IDAC overhead, 1 mAtyp 40 uA13
Analog supply current IAVDDAdditional analog supply current per function, AVDD = 3.3 V; IDAC overhead, 1.5 mAtyp 50 uA13
Analog supply current IAVDDAdditional analog supply current per function, AVDD = 3.3 V; IDAC overhead, 2 mAtyp 65 uA13
Analog supply current IAVDDAdditional analog supply current per function, AVDD = 3.3 V; PGA rail detection and reference detection circuittyp 10 uA13
Digital supply current IDVDD + IIOVDDDVDD = IOVDD = 3.3 V, all data rates, SPI not active; Power-down mode, internal oscillatortyp 0.1 uA13
Digital supply current IDVDD + IIOVDDDVDD = IOVDD = 3.3 V, all data rates, SPI not active; Standby mode, internal oscillatortyp 185 uA13
Digital supply current IDVDD + IIOVDDDVDD = IOVDD = 3.3 V, all data rates, SPI not active; Conversion mode, internal oscillatortyp 225 · max 300 uA13
Digital supply current IDVDD + IIOVDDDVDD = IOVDD = 3.3 V, all data rates, SPI not active; Conversion mode, external fCLK = 4.096 MHztyp 195 uA13
Power dissipation PDAVDD = DVDD = IOVDD = 3.3 V, internal reference enabled, reference buffers disabled, IDACs disabled, VBIAS disabled, flags disabled, internal oscillator, all data rates, VIN = 0 V, SPI not active; Conversion mode, PGA enabled, gain = 1typ 1.75 mW13
Delay time, first SCLK rising edge after CS falling edge td(CSSC)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 20 ns14
Delay time, CS rising edge after final SCLK falling edge td(SCCS)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 20 ns14
Pulse duration, CS high tw(CSH)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 30 ns14
SCLK period tc(SC)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 100 ns14
Pulse duration, SCLK high tw(SCH)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 40 ns14
Pulse duration, SCLK low tw(SCL)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 40 ns14
Setup time, DIN valid before SCLK falling edge tsu(DI)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 15 ns14
Hold time, DIN valid after SCLK falling edge th(DI)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 20 ns14
Delay time, between bytes or commands td(CMD)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 0 ns14
Pulse duration, RESET low tw(RSL)tCLK = 1 / fCLKmin 4 tCLK14
Delay time, first SCLK rising edge after RESET rising edge (or 7th SCLK falling edge of RESET command) td(RSSC)tCLK = 1 / fCLKmin 4096 tCLK14
Pulse duration, START/SYNC high tw(STH)tCLK = 1 / fCLKmin 4 tCLK14
Pulse duration, START/SYNC low tw(STL)tCLK = 1 / fCLKmin 4 tCLK14
Setup time, START/SYNC falling edge (or 7th SCLK falling edge of STOP command) before DRDY falling edge to stop further conversions (continuous conversion mode) tsu(STDR)tCLK = 1 / fCLKmin 32 tCLK14
Hold time, SCLK low before DRDY falling edge th(SCDR)Only applicable when reading data without the RDATA command; tCLK = 1 / fCLKmin 28 tCLK14
Delay time, SCLK rising edge after DRDY falling edge td(DRSC)Only applicable when reading data without the RDATA command; tCLK = 1 / fCLKmin 4 tCLK14
Propagation delay time, CS falling edge to DOUT driven tp(CSDO)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 0 · max 25 ns14
Propagation delay time, SCLK rising edge to valid new DOUT tp(SCDO)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 3 · max 30 ns14
Propagation delay time, CS rising edge to DOUT high impedance tp(CSDOZ)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 0 · max 25 ns14
Propagation delay time, START/SYNC rising edge (or first SCLK rising edge of any command or data read) to DRDY rising edge tp(STDR)tCLK = 1 / fCLKmax 2 tCLK14
Pulse duration, DRDY high tw(DRH)tCLK = 1 / fCLKmin 24 tCLK14
Propagation delay time, last SCLK falling edge of WREG command to GPIOx output valid tp(GPIO)DVDD = 2.7 V to 3.6 V, IOVDD = DVDD to 5.25 V; DOUT/DRDY load = 20 pF || 100 kΩ to DGNDmin 3 · max 100 ns14
SPI timeout per 8 bitThe SPI interface resets when an entire byte is not sent within the specified timeout time; tCLK = 1 / fCLKmin 215 tCLK14

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the ADS124S08IRHB?

Yes. The symbol is EasyEDA_Cloud:ADS114S06IRHBT and the footprint EasyEDA_Cloud:VQFN-32_L5.0-W5.0-P0.50-TL-EP2.1, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADS124S08IRHB?

VQFN-32-EP(5x5), with 33 pins. Its footprint is drawn on this page.

Where is the ADS124S08IRHB datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ADS124S08IRHB?

JLCPCB lists it as part C2655452, with 15 in stock; the sellers' links on this page open their listings.

What can replace the ADS124S08IRHB?

Parts like it in the library: the ADS114S08IRHB by Texas Instruments, the ADS1283IRHFT by Texas Instruments, the ADS1148IRHB by Texas Instruments and the ADS1284IRHFR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.