ADS1234IPWG4
Texas InstrumentsExtended
- Part id
- ti/ADS1234IPWG4
- Category
- Uncategorised
- Package
- TSSOP-28
- Pins
- 28
- In stock
- 0 at JLCPCB (C21068988)
Overview
The ADS1234IPWG4 is an uncategorised made by Texas Instruments in a TSSOP-28 package with 28 pins.
PCBKit's library has its KiCad symbol (Analog_ADC:ADS1234IPW, from KiCad's library) and its footprint (Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C21068988).
Symbol
Footprint
Pinout
28| Pin | Name | Type |
|---|---|---|
| 1 | DVDD | Power in |
| 2 | DGND | Power in |
| 3 | CLKIN/XTAL1 | Input/output |
| 4 | XTAL2 | Input/output |
| 5 | DGND | Power in |
| 6 | DGND | Power in |
| 7 | A1 | Input |
| 8 | A0 | Input |
| 9 | CAP | Passive |
| 10 | CAP | Passive |
| 11 | AINP1 | Input |
| 12 | AINN1 | Input |
| 13 | AINP3 | Input |
| 14 | AINN3 | Input |
| 15 | AINN4 | Input |
| 16 | AINP4 | Input |
| 17 | AINN2 | Input |
| 18 | AINP2 | Input |
| 19 | REFN | Input |
| 20 | REFP | Input |
| 21 | AGND | Power in |
| 22 | AVDD | Power in |
| 23 | GAIN0 | Input |
| 24 | GAIN1 | Input |
| 25 | SPEED | Input |
| 26 | PWDN | Input |
| 27 | SCLK | Input |
| 28 | DRDY/DOUT | Output |
Parts like it
8CS5248
TSSOP-28-40℃~+105℃ 2.42MHz~2.493MHz、2.4576MHz 2.8V~5.5V 24 3.125Hz 360uA 8 Auto calibration、Built-in temperature sensor、Multiplexers、Input buffer、Power-on reset、Integrated modulator、Under-voltage detection、Soft reset、Synchronous triggering、Built-in digital filter External、Built-in External、Built-in SPI Sigma-Delta Support Yes TSSOP-28 Analog to Digital Converters (ADC) ROHSCooperationUncategorised3PD5651E
TSSOP28TSSOP28 Digital to Analog Converters (DAC) ROHS3PEAKUncategorisedAD7490BRU
TSSOP2816-Channel, 1 MSPS, 12-Bit ADC with SequencerAnalog DevicesUncategorisedADUC814BRU
TSSOP28MicroConverter®, Small Package 12-Bit ADC with Embedded Flash MCUAnalog DevicesUncategorisedM032EC1AE
TSSOP-28TSSOP-28 New Arrivals ROHSNuvoton TechUncategorisedM0A23EC1ACU
TSSOP-28UncategorisedNuvoton TechMS9714
TSSOP-28TSSOP-28 Digital to Analog Converters (DAC) ROHSHangzhou Ruimeng TechUncategorisedHCT6751
TSSOP-28-40℃~+105℃ 2.4576MHz 2.8V~5.5V 24 6.4kHz、12.8kHz 600nA 8 Auto calibration、Built-in temperature sensor、Multiplexers、Power-on reset、Integrated modulator、Multi-chip synchronization、Under-voltage detection、Soft reset、Synchronous triggering、Built-in digital filter Built-in Built-in SPI Sigma-Delta Support Yes TSSOP-28 Analog to Digital Converters (ADC) ROHSHCTmicroUncategorised
Questions
Is there a KiCad symbol and footprint for the ADS1234IPWG4?
Yes. The symbol is Analog_ADC:ADS1234IPW and the footprint Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADS1234IPWG4?
TSSOP-28, with 28 pins. Its footprint is drawn on this page.
Where can I order the ADS1234IPWG4?
JLCPCB lists it as part C21068988, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ADS1234IPWG4?
Parts like it in the library: the CS5248 by Cooperation, the 3PD5651E by 3PEAK, the AD7490BRU by Analog Devices and the ADUC814BRU by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.