ADS1015LIDGS
Texas Instruments
Ultra-Small, Low-Power, 12-Bit, 3.3-kSPS ADCs with PGA, Comparator and 1.8-V I2C Bus Voltage Support
- Part id
- ti/ADS1015LIDGS
- Category
- Uncategorised
- Package
- MSOP10
- Pins
- 10
Overview
The ADS1015LIDGS is an uncategorised made by Texas Instruments in a MSOP10 package with 10 pins. Ultra-Small, Low-Power, 12-Bit, 3.3-kSPS ADCs with PGA, Comparator and 1.8-V I2C Bus Voltage Support.
PCBKit's library has its KiCad symbol (Analog & Interface:ADS1015L, from CERN's library) and its footprint (Package_SO:MSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board.
Symbol
Footprint
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | ADDR | Input |
| 2 | ALERT | Output |
| 3 | GND | Power in |
| 4 | AIN0 | Input |
| 5 | AIN1 | Input |
| 6 | AIN2 | Input |
| 7 | AIN3 | Input |
| 8 | VDD | Power in |
| 9 | SDA | Input/output |
| 10 | SCL | Input |
Parts like it
8
MS5112M
MSOP-10-40℃~+125℃ 16 2 2.7V~5.5V 240Hz 275kHz 290uA Built-in Built-in I2C Multiplexers、Power-on reset、Bipolar input、Integrated modulator、Built-in digital filter Sigma-Delta Support Yes MSOP-10 Analog to Digital Converters (ADC) ROHSHangzhou Ruimeng TechUncategorisedLKP4153MS
MSOP-10MSOP-10 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSLKWICUncategorisedXADC084S021-XC
MSOP-10-40℃~+85℃ 0.4LSB 1.6MHz~6.4MHz 2.7V~5.25V 200kHz 4 49.5dB 8 Built-in External Multiplexers No Not supported SAR SPI MSOP-10 Analog to Digital Converters (ADC) ROHSSi-ChangeUncategorisedXADC084S051-XC
MSOP-10-40℃~+85℃ 0.5LSB 2.7V~5.25V 3.2MHz~8MHz 4 49.5dB 500kHz 8 Built-in External Multiplexers No SAR SPI MSOP-10 Analog to Digital Converters (ADC) ROHSSi-ChangeUncategorisedVP3481MSG10-B
MSOP-10UncategorisedVIVALTC5223YV10
MSOP-10LUncategorisedLinearinTPC5180-VS2R
MSOP10Multi-chip synchronization、Synchronous triggering MSOP10 Analog to Digital Converters (ADC) ROHS3PEAKUncategorisedTPC6160IS-VS2R
MSOP10MSOP10 Analog to Digital Converters (ADC) ROHS3PEAKUncategorised
Questions
Is there a KiCad symbol and footprint for the ADS1015LIDGS?
Yes. The symbol is Analog & Interface:ADS1015L and the footprint Package_SO:MSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADS1015LIDGS?
MSOP10, with 10 pins. Its footprint is drawn on this page.
What can replace the ADS1015LIDGS?
Parts like it in the library: the MS5112M by Hangzhou Ruimeng Tech, the LKP4153MS by LKWIC, the XADC084S021-XC by Si-Change and the XADC084S051-XC by Si-Change. Check their datasheets: a part that fits the footprint may still differ in its ratings.