ADC0816CCJ
Texas InstrumentsExtended
-40℃~+85℃ 10kHz~1.28MHz、640kHz 16 300uA 4.5V~6V 8 Multiplexers SAR CDIP-40 Analog to Digital Converters (ADC)
- Part id
- ti/ADC0816CCJ
- Category
- Analog To Digital Converters (ADC)
- Package
- CDIP-40
- Pins
- 40
- In stock
- 0 at JLCPCB (C17359359)
Overview
The ADC0816CCJ is an analog To Digital Converter made by Texas Instruments in a CDIP-40 package with 40 pins. -40℃~+85℃ 10kHz~1.28MHz、640kHz 16 300uA 4.5V~6V 8 Multiplexers SAR CDIP-40 Analog to Digital Converters (ADC).
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADC0816CCJ, from EasyEDA) and its footprint (EasyEDA_Cloud:DIP-40_L52.3-W13.9-P2.54-LS15.2-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C17359359).
Symbol
Footprint
Pinout
40| Pin | Name | Type |
|---|---|---|
| 1 | IN3 | Unspecified |
| 2 | IN4 | Unspecified |
| 3 | IN5 | Unspecified |
| 4 | IN6 | Unspecified |
| 5 | IN7 | Unspecified |
| 6 | IN8 | Unspecified |
| 7 | IN9 | Unspecified |
| 8 | IN10 | Unspecified |
| 9 | IN11 | Unspecified |
| 10 | IN12 | Unspecified |
| 11 | IN13 | Unspecified |
| 12 | IN14 | Unspecified |
| 13 | EOC | Unspecified |
| 14 | IN15 | Unspecified |
| 15 | MULTIPLEXER_OUT | Unspecified |
| 16 | START | Unspecified |
| 17 | VCC | Unspecified |
| 18 | COMPARATOR_IN | Unspecified |
| 19 | REF(+) | Unspecified |
| 20 | GND | Unspecified |
| 21 | OUTPUT_ENABLE | Unspecified |
| 22 | CLOCK | Unspecified |
| 23 | REF(-) | Unspecified |
| 24 | 2-8LSB | Unspecified |
| 25 | 2-7 | Unspecified |
| 26 | 2-6 | Unspecified |
| 27 | 2-5 | Unspecified |
| 28 | 2-4 | Unspecified |
| 29 | 2-3 | Unspecified |
| 30 | 2-2 | Unspecified |
| 31 | 2-1MSB | Unspecified |
| 32 | ALE | Unspecified |
| 33 | ADD_D | Unspecified |
| 34 | ADD_C | Unspecified |
| 35 | ADD_B | Unspecified |
| 36 | ADD_A | Unspecified |
| 37 | EXPANSION_CONTROL | Unspecified |
| 38 | IN0 | Unspecified |
| 39 | IN1 | Unspecified |
| 40 | IN2 | Unspecified |
Parts like it
3GC7107CD
DIP-40LAnalog To Digital Converters (ADC)SungineICL7126RCPL
-0℃~+70℃ Digital filtering、Built-in reference source、Bipolar input、Low noise front-end - ADCs/DACs - Special Purpose ROHSMaxim Integrated (Analog Devices)Analog To Digital Converters (ADC)ICL7126RCPL
-0℃~+70℃ Low noise front-end - ADCs/DACs - Special PurposeTexas InstrumentsAnalog To Digital Converters (ADC)
Questions
Is there a KiCad symbol and footprint for the ADC0816CCJ?
Yes. The symbol is EasyEDA_Cloud:ADC0816CCJ and the footprint EasyEDA_Cloud:DIP-40_L52.3-W13.9-P2.54-LS15.2-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADC0816CCJ?
CDIP-40, with 40 pins. Its footprint is drawn on this page.
Where is the ADC0816CCJ datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the ADC0816CCJ?
JLCPCB lists it as part C17359359, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ADC0816CCJ?
Parts like it in the library: the GC7107CD by Sungine, the ICL7126RCPL by Maxim Integrated (Analog Devices) and the ICL7126RCPL by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.