Skip to the content
123456

74LVC1G373DCK

Texas InstrumentsExtended

-40℃~+125℃ 1 1.65V~5.5V 10uA 24mA 24mA 4ns 74LVC D Latch Tri-State SC-70-6 Latches ROHS

Part id
ti/74LVC1G373DCK
Category
Latches
Package
SC-70-6
Pins
6
In stock
0 at JLCPCB (C2675405)
Used on
9 open-source boards

Overview

The 74LVC1G373DCK is a latche made by Texas Instruments in a SC-70-6 package with 6 pins. -40℃~+125℃ 1 1.65V~5.5V 10uA 24mA 24mA 4ns 74LVC D Latch Tri-State SC-70-6 Latches ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74LVC1G373, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-363_SC-70-6, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2675405). 9 open-source boards in 7 repositories on GitHub use it.

Symbol

1LE2GND3D4Q5VCC6OE
74xGxx:74LVC1G373From KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-363_SC-70-6From KiCad's library

Pinout

6
The pins of the 74LVC1G373DCK
PinNameType
1LEInput
2GNDPower in
3DInput
4QTri-state
5VCCPower in
6OEInput

Open-source boards using it

9See all 9
  • 6 layers249.4 × 111.5 mmMxm immobilizer, the printed circuit board in 3D

    Mxm immobilizer

    a-little-wifi/mxm-immobilizer

    MXM to PCIe adapter

    419 parts75
  • 4 layers152.4 × 77.4 mmAppletini board, the printed circuit board in 3D

    Appletini board

    jtflanagan/AppleTini

    Teeny 4.1-based multifunctional Apple II peripheral card

    42 parts17BSD-2-Clause
  • 6 layers203.7 × 69 mmDGFFAdapter, the printed circuit board in 3D

    DGFFAdapter

    a-little-wifi/dgff-immobilizer

    PCIe adapter for Dell DGFF laptop GPUs

    159 parts11
  • 2 layers62 × 45 mmCcc, the printed circuit board in 3D

    Ccc

    fasmide/kamstrup-ccc

    a kamstrup ccc module

    26 parts1
  • 4 layers50 × 50 mmUSB Hub, the printed circuit board in 3D

    USB Hub

    drewsum/USB_Hub

    A DIY USB hub with digital monitoring on all ports

    206 partsGPL-3.0
  • 2 layers160 × 114.3 mmVGAGAL, the printed circuit board in 3D

    VGAGAL

    flypie/Ace-2019

    Reimplimentation of the Jupiter ACE with slightly more modern hardware. https://www.jupiter-ace.co.uk/ the KiCad versions are the up to date designs which are available at https://jupiterdeuce.blogspot.com and…

    77 parts13GPL-3.0
  • 4 layers622.7 × 375.7 mmCft ctl, the printed circuit board in 3D

    Cft ctl

    alexiosc/cft

    The CFT homebrew minicomputer

    215 parts6GPL-3.0
  • 4 layers131.9 × 164.6 mmCft ctl dip, the printed circuit board in 3D

    Cft ctl dip

    alexiosc/cft

    The CFT homebrew minicomputer

    215 parts6GPL-3.0

Parts like it

6

Questions

Is there a KiCad symbol and footprint for the 74LVC1G373DCK?

Yes. The symbol is 74xGxx:74LVC1G373 and the footprint Package_TO_SOT_SMD:SOT-363_SC-70-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74LVC1G373DCK?

SC-70-6, with 6 pins. Its footprint is drawn on this page.

Where is the 74LVC1G373DCK datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the 74LVC1G373DCK?

JLCPCB lists it as part C2675405, with 0 in stock; the sellers' links on this page open their listings.

What can replace the 74LVC1G373DCK?

Parts like it in the library: the SN74LVC1G373DCK by Texas Instruments, the NC7SZ373P6X by onsemi, the RS1G373XC6 by Jiangsu RUNIC Tech and the 74AUP1G373GW by Nexperia. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74LVC1G373DCK?

9 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.